Zte Blade A7 2020 User manual


Quick Start Guide .................................................................. 1
Kurzanleitung .......................................................................16
Hızlı Başlangıç Kılavuzu.....................................................32
Guía de inicio rápido..........................................................47
Guia de início rápido..........................................................62

1
ZTE Blade A7 2020
Quick Start Guide

2
LEGAL INFORMATION
Copyright © 2019 ZTE CORPORATION.
All rights reserved.
No part of this publication may be quoted,
reproduced, translated or used in any form or by
any means, electronic or mechanical, including
photocopying and microlm, without the prior
written permission of ZTE Corporation.
Notice
ZTE Corporation reserves the right to make
modications on print errors or update specications
in this guide without prior notice.
We oer self-service for our smart terminal device
users. Please visit the ZTE ocial website (at
www.ztedevices.com) for more information on self-
service and supported product models. Information
on the website takes precedence.
Visit http://www.ztedevices.com to download
the user manual. Just click Support from the home
page and then select the location, product type, and
name to search for related support information.
Disclaimer
ZTE Corporation expressly disclaims any liability
for faults and damages caused by unauthorized
modications of the software.
Images and screenshots used in this guide may
dier from the actual product. Content in this guide
may dier from the actual product or software.

3
Trademarks
ZTE and the ZTE logos are trademarks of ZTE
Corporation.
Android™ is a trademark of Google LLC.
The Bluetooth® word mark and logos are registered
trademarks owned by the Bluetooth SIG, Inc. and
any use of such marks by ZTE Corporation is under
license.
microSDXC Logo is a trademark of SD-3C,
LLC.
Other trademarks and trade names are those of their
respective owners.
Version No.: R1.0
Edition Time : November 4, 2019

4
Getting to Know Your Phone
Earpiece Light sensor
Indicator light
Proximity sensor
Volume key
Power key
Headset jack
Fingerprint sensor
Front camera
Touch screen
Microphone
Back cameras
Flash
Speaker
Charging/ micro-
USB jack
nano-SIM/
microSDXC card tray

5
Setting Up Your Phone
The nano-SIM cards can be installed or removed
while the phone is turned on.
WARNING!
To avoid damage to the phone, do not use any other
kind of SIM cards, or any non-standard nano-SIM
card cut from a SIM card. You can get a standard
nano-SIM card from your service provider.
1. Insert the tip of the tray eject tool into the hole
on the card tray.
2. Pull out the card tray and place a nano-SIM card
in slot 1 and a microSDXC card (optional) or
a nano-SIM card in slot 2, as shown. Carefully
slide the tray back into place.
Slot 2
Slot 1

6
NOTE:
When two nano-SIM cards are installed, both cards
can connect to the 4G, 3G, or 2G network, and either
card can be used for mobile data.
Charging the Phone
Your phone’s battery should have enough power for
the phone to turn on, nd a signal, and make a few
calls. You should fully charge the battery as soon as
possible.
WARNING!
Use only ZTE-approved chargers and USB cables.
The use of unapproved accessories could damage
your phone or cause the battery to explode.
WARNING!
Do not remove the back cover. The battery is not
removable. Removal may cause re or explosion.

7
1. Connect the adapter to the charging jack.
Ensure that the adapter is inserted in the
correct direction.
2. Connect the charger to a standard AC power
outlet.
3. Disconnect the charger when the battery is
fully charged.
NOTE:
If the battery is extremely low, you may be unable to
power on the phone even when it is being charged.
In this case, try again after charging the phone for
at least 20 minutes. Contact the customer service if
you still cannot power on the phone after prolonged
charging.

8
Powering On/O Your Phone
Make sure the battery is charged before powering
on.
• Press and hold the Power key to turn on your
phone.
• To power o, press and hold the Power key to
open the options menu, and touch > .
NOTE:
If the screen freezes or takes too long to respond,
try pressing and holding the Power key for about 10
seconds to restart the phone.
Waking Up Your Phone
Your phone automatically goes into sleep mode
when it is not in use for some time. The display is
turned o to save power and the keys are locked to
prevent accidental operations.
You can wake up your phone by turning on the
display and unlocking the keys.
1. Press the Power key to turn the screen on.
2. Swipe up on the screen.
NOTE:
If you have set a face verication, a ngerprint, an
unlock pattern, a PIN or a password for your phone,
you’ll need to use your face or ngerprint, draw the
pattern, or enter the PIN/password to unlock your
screen.

9
Product Safety Information
Don’t make or receive phone calls while
driving. Never text while driving.
Keep your phone at least 5 mm away
from your body while making calls.
Small parts may cause choking.
Your phone can produce a loud sound.
To prevent possible hearing damage, do
not listen at high volume levels for long
periods. Exercise caution when holding
your phone near your ear while the
loudspeaker is in use.
Avoid contact with anything magnetic.
Keep away from pacemakers and other
electronic medical devices.
Turn o when asked to in hospitals and
medical facilities.
Turn o when told to on aircraft and at
airports.
Turn o when near explosive materials or
liquids.
Don’t use at gas stations.
Your phone may produce a bright or
ashing light.

10
Don’t dispose of your phone in re.
Avoid extreme temperatures.
Avoid contact with liquids. Keep your
phone dry.
Do not attempt to disassemble your
phone.
Only use approved accessories.
For pluggable equipment, the socket-
outlet shall be installed near the
equipment and shall be easily accessible.
Don’t rely on your phone as a primary
device for emergency communications.

11
Specic Absorption Rate (SAR)
Your mobile device is a radio transmitter and
receiver. It is designed not to exceed the limits
for exposure to radio waves recommended
by international guidelines. These guidelines
were developed by the independent scientic
organization ICNIRP and include safety margins
designed to assure the protection of all persons,
regardless of age and health.
The guidelines use a unit of measurement known as
Specic Absorption Rate, or SAR. The SAR limit for
mobile devices is 2 W/kg and the highest SAR value
for this device when tested at the head was 0.240
W/kg*, and when tested at the body was 1.424 W/
kg* with 5 mm distance. As mobile devices oer
a range of functions, they can be used in other
positions, such as on the body as described in the
user manual**.
As SAR is measured utilizing the device’s highest
transmitting power, the actual SAR of this device
while operating is typically below that indicated
above. This is due to automatic changes to the
power level of the device to ensure it only uses the
minimum power required to communicate with the
network.
* The tests are carried out in accordance with EN
50360, EN 50566, EN 62479, EN 62311, EN 62209-1
and EN 62209-2.
** Please see body worn operation in the user
manual.

12
Specication
EUT supports
radios
application
GSM Band 2, 3, 5, 8
WCDMA Band 1, 2, 5, 8
LTE Band 1, 3, 5, 7, 8, 20, 38
802.11b/g/n
Bluetooth V4.2+LE
GPS
WCDMA Version Rel.9
LTE Version Rel.11
Maximum
RF output
power
GSM Band 2/3: 30 dBm
GSM Band 5/8: 32 dBm
WCDMA Band 1/2/5/8: 24 dBm
LTE Band 1/3/5/7/8/20/38: 24 dBm
802.11 b: 18 dBm
802.11 g: 17 dBm
802.11 n: 16 dBm
Bluetooth EDR: 11 dBm
Bluetooth LE: 5 dBm
GPS (RX Only)

13
CE Caution
Battery Caution
Risk of explosion if battery is replaced by an
incorrect type. Dispose of used batteries according
to the instructions.
USB Port
This product shall only be connected to a USB
interface of version USB 2.0.
Proper Use
As described in this guide, your device can be used
only in right location. If possible, please do not
touch the antenna area on your device.
Do not expose your device to extreme temperatures
lower than - 10 °C and higher than + 55 °C.

14
Disposal of Your Old Appliance
1. When this crossed-out wheeled
bin symbol is attached to a
product, it means the product
is covered by the European
Directive 2012/19/EU.
2. All electrical and electronic
products should be disposed of
separately from the municipal
waste stream via designated
collection facilities appointed
by the government or the local
authorities.
3. The correct disposal of your
old appliance will help prevent
potential negative consequences
for the environment and human
health.
For this product’s recycling information based on
WEEE directive, please send an e-mail to

15
EU DECLARATION OF CONFORMITY
Hereby, ZTE Corporation declares that the radio
equipment type ZTE Blade A7 2020 is in compliance
with Directive 2014/53/EU.
The full text of the EU declaration of conformity is
available at the following Internet address:
http://certication.ztedevices.com

16
ZTE Blade A7 2020
Kurzanleitung

17
RECHTLICHE INFORMATIONEN
Copyright © 2019 ZTE CORPORATION.
Alle Rechte vorbehalten.
Dieses Benutzerhandbuch darf ohne die vorherige
schriftliche Zustimmung der ZTE Corporation
weder ganz noch in Auszügen zitiert, vervielfältigt,
übersetzt oder in jedweder Form und unter
Verwendung jedweder Mittel, seien es elektronische
oder mechanische, inklusive der Erstellung von
Fotokopien und Mikrolmen, verwendet werden.
Hinweis
Die ZTE Corporation behält sich das Recht vor,
Druckfehler und technische Änderungen in dieser
Anleitung ohne Vorankündigung zu korrigieren oder
zu aktualisieren.
Für kundige Anwender bieten wir auch die
Möglichkeit der selbstständigen Fehlerbehebung
an. Besuchen Sie die ozielle ZTE-Website (unter
www.ztedevices.com) für weitere Informationen
zur selbstständigen Fehlerbehebung sowie zu
den hierfür unterstützten Produktmodellen.
Informationen auf der Website haben Vorrang vor
denen in diesem Dokument.
Besuchen Sie http://www.ztedevices.com zum
Herunterladen des Benutzerhandbuches. Klicken Sie
auf der Startseite einfach auf Support und wählen
Sie anschließend Ihren Standort, den Produkttyp
und den Produktnamen, um die jeweiligen
Supportinformationen zu nden.

18
Haftungsausschluss
Die ZTE Corporation übernimmt keine Haftung für
Fehler und Schäden, die durch nicht autorisierte
Veränderungen an der Software verursacht werden.
Die in dieser Anleitung verwendeten Bilder und
Screenshots können vom tatsächlichen Produkt
abweichen. Inhalte in diesem Handbuch können
vom tatsächlichen Produkt oder der Software
abweichen.
Eingetragene Marken
ZTE und die ZTE-Logos sind eingetragene
Warenzeichen der ZTE Corporation.
Android™ ist eine Marke von Google LLC.
Die Marke Bluetooth® und ihre Logos sind Eigentum
der Bluetooth SIG, Inc. und jegliche Nutzung dieser
Marken durch die ZTE Corporation ist lizenziert.
Das microSDXC-Logo ist eine Marke von
SD-3C, LLC.
Sonstige eingetragene Warenzeichen und
Handelsnamen sind Eigentum ihrer jeweiligen
Inhaber.
Version-Nr.: R1.0
Ausgabedatum: 4. November 2019
Other manuals for Blade A7 2020
1
Table of contents
Languages:
Other Zte Telephone manuals