ZUCCHETTI AZZURRO 1PH HYD3000-HYD6000-ZSS-HP User manual

User Manual 1PH HYD3000-HYD6000-ZSS-HP
Rev. 1.2 24/04/2023
Identification: MD-AL-GI-00 (System info)
Rev. 1.1 of 07/03/2022
- Application: GID
1/240
Hybrid Inverter
1PH HYD3000-HYD6000-ZSS-HP
User Manual

User Manual 1PH HYD3000-HYD6000-ZSS-HP
Rev. 1.2 24/04/2023
Identification: MD-AL-GI-00 (System info)
Rev. 1.1 of 07/03/2022
- Application: GID
2/240
Summary
1. Introduction......................................................................................................................................................................................... 9
2. Preliminary safety instructions ................................................................................................................................................. 10
2.1. Safety Notes.............................................................................................................................................................................. 10
2.2. Assembly and maintenance diagram.............................................................................................................................12
2.3. Symbols on the inverter ......................................................................................................................................................13
3. Installation.......................................................................................................................................................................................... 15
3.1. Product overview................................................................................................................................................................... 15
3.2. Package contents....................................................................................................................................................................16
3.3. Installation area......................................................................................................................................................................17
3.4. Installation tools.....................................................................................................................................................................17
3.5. Wall installation position.................................................................................................................................................... 19
3.6. Installation instructions...................................................................................................................................................... 20
4. Electric connections........................................................................................................................................................................21
4.1. Wiring instructions ...............................................................................................................................................................24
4.2. Connecting PGND cables ..................................................................................................................................................... 25
4.3. Connecting to grid..................................................................................................................................................................26
4.4. Connecting a Critical Load (EPS function)...................................................................................................................29
4.5. Photovoltaic connection...................................................................................................................................................... 33
4.6. Battery connection ................................................................................................................................................................37
4.7. Connecting the Pylontech US2000 battery..................................................................................................................38
4.7.1. Connecting a single Pylontech US2000 battery..............................................................................................38
4.7.2. Connecting multiple batteries in parallel Pylontech US2000...................................................................40
4.7.3. Pylontech US2000 configuration ...........................................................................................................................41
4.8. Pylontech US5000 battery connection..........................................................................................................................43
4.8.1. Connecting a single Pylontech US5000 battery...............................................................................................43
4.8.2. Connecting multiple batteries in parallel Pylontech US5000...................................................................45
4.8.3. Pylontech US5000 configuration ...........................................................................................................................47
4.9. Connecting a WeCo 4k4 battery.......................................................................................................................................48
4.9.1. Connecting a single 4k4 battery.............................................................................................................................48
4.9.2. Connecting multiple batteries in parallel 4k4..................................................................................................50

User Manual 1PH HYD3000-HYD6000-ZSS-HP
Rev. 1.2 24/04/2023
Identification: MD-AL-GI-00 (System info)
Rev. 1.1 of 07/03/2022
- Application: GID
3/240
4.9.3. WeCo 4k4 configuration............................................................................................................................................53
4.10. Connecting a WeCo 4k4 PRO battery.............................................................................................................................54
4.10.1. Connecting a single 4k4 PRO battery...................................................................................................................54
4.10.2. Connecting multiple batteries in parallel 4k4 PRO........................................................................................56
4.10.3. WeCo 4k4 PRO configuration.................................................................................................................................. 58
4.11. Connecting a WeCo 4k4-LT battery................................................................................................................................ 60
4.11.1. Connecting a single 4k4-LT battery......................................................................................................................60
4.11.2. Connecting multiple batteries in parallel 4k4-LT...........................................................................................62
4.11.3. WeCo 4k4-LT configuration..................................................................................................................................... 64
4.11.4. Switching on WeCo 4k4-LT batteries...................................................................................................................66
4.12. WeCo 4k4-LT battery and WeCo 4k4 PRO batteries in parallel .........................................................................67
4.13. Connecting a WeCo 5K3 battery ...................................................................................................................................... 68
4.13.1. Connecting a single 5K3 battery ............................................................................................................................68
4.13.2. Connecting multiple batteries in parallel 5K3..................................................................................................71
4.13.3. WeCo 5K3 configuration ...........................................................................................................................................74
4.14. Connecting a WeCo 5K3XP battery.................................................................................................................................75
4.14.1. Connecting a single 5K3XP battery......................................................................................................................75
4.14.2. Connecting multiple batteries in parallel 5K3XP............................................................................................78
4.14.3. WeCo 5K3XP configuration......................................................................................................................................81
4.14.4. Switching on WeCo 5K3XP batteries....................................................................................................................82
4.15. WeCo 5K3XP battery and 5K3 batteries in parallel.................................................................................................83
4.16. Connecting an AZZURRO 5000 battery.........................................................................................................................85
4.16.1. Connecting a single AZZURRO 5000 battery....................................................................................................85
4.16.2. Connecting multiple batteries in parallel AZZURRO 5000..........................................................................87
4.16.3. 5000 AZZURRO configuration................................................................................................................................. 89
4.17. Connecting an AZZURRO 5000 PRO battery...............................................................................................................91
4.17.1. Connecting a single AZZURRO 5000 PRO battery...........................................................................................91
4.17.2. Connecting multiple batteries in parallel AZZURRO 5000 PRO................................................................93
4.17.3. AZZURRO 5000 PRO configuration.......................................................................................................................95
4.18. Connecting an AZZURRO ZSX 5120 battery................................................................................................................97
4.18.1. Connecting a single AZZURRO ZSX 5120 battery............................................................................................97
4.18.2. Connecting multiple batteries in parallel AZZURRO ZSX 5120.................................................................99
4.18.3. AZZURRO ZSX5120 configuration...................................................................................................................... 101
5. External communication interface ........................................................................................................................................ 103
5.1. USB/WIFI communication interface........................................................................................................................... 103

User Manual 1PH HYD3000-HYD6000-ZSS-HP
Rev. 1.2 24/04/2023
Identification: MD-AL-GI-00 (System info)
Rev. 1.1 of 07/03/2022
- Application: GID
4/240
5.1.1. Multifunction communication interface (COM)............................................................................................ 104
5.1.2. Measurement of exchange via the single-phase DDSU Meter................................................................. 110
5.1.3. Measuring external production through the DDSU single-phase Meter ............................................ 113
5.1.4. Setting up exchange meter and production DDSU single-phase Meter .............................................. 116
5.1.5. Checking correct reading of the DDSU single-phase Meter ..................................................................... 117
5.1.6. Connection of the three-phase DTSU Meter to the exchange.................................................................. 118
5.1.7. Measurement of photovoltaic production via three-phase meter DTSU ........................................... 122
5.1.8. Three-phase DTSU Meter parameter configuration ................................................................................... 123
5.1.9. Correct installation verification DTSU three-phase meter....................................................................... 127
5.1.10. Measuring exchange via current sensor .......................................................................................................... 129
5.1.11. Connection port 0 and 1-Cascade communication interface .................................................................. 132
6. Buttons and indicator lights..................................................................................................................................................... 133
6.1. Buttons:................................................................................................................................................................................... 133
6.2. Indicator lights and operating status.......................................................................................................................... 133
7. Function............................................................................................................................................................................................ 134
7.1. Preliminary checks............................................................................................................................................................. 134
7.2. First start-up of the inverter .......................................................................................................................................... 134
7.3. Commissioning..................................................................................................................................................................... 140
7.4. Main menu ............................................................................................................................................................................. 140
7.4.1. Basic settings............................................................................................................................................................... 142
7.4.2. Advanced settings ..................................................................................................................................................... 150
7.4.3. Production statistics................................................................................................................................................. 155
7.4.4. System information .................................................................................................................................................. 156
7.4.5. Event list........................................................................................................................................................................ 157
7.4.6. Software Update ........................................................................................................................................................ 158
8. Verification of proper operation ............................................................................................................................................ 160
8.1. Checking the settings......................................................................................................................................................... 163
9. Technical specifications............................................................................................................................................................. 165
10. Troubleshooting............................................................................................................................................................................ 166
11. Maintenance.................................................................................................................................................................................... 183
12. Uninstalling ..................................................................................................................................................................................... 184
12.1. Installation steps................................................................................................................................................................. 184
12.2. Packaging................................................................................................................................................................................ 184
12.3. Storage..................................................................................................................................................................................... 184
12.4. Disposal................................................................................................................................................................................... 184

User Manual 1PH HYD3000-HYD6000-ZSS-HP
Rev. 1.2 24/04/2023
Identification: MD-AL-GI-00 (System info)
Rev. 1.1 of 07/03/2022
- Application: GID
5/240
13. Monitoring system ....................................................................................................................................................................... 185
13.1. External Wi-Fi adapter...................................................................................................................................................... 186
13.1.1. Installation ................................................................................................................................................................... 186
13.1.2. Configuration .............................................................................................................................................................. 187
13.1.3. Check .............................................................................................................................................................................. 196
13.1.4. Troubleshooting......................................................................................................................................................... 199
13.2. Ethernet adapter ................................................................................................................................................................. 203
13.2.1. Installation ................................................................................................................................................................... 203
13.2.2. Check .............................................................................................................................................................................. 205
13.2.3. Troubleshooting......................................................................................................................................................... 206
13.2.4. 4G adapter.................................................................................................................................................................... 208
13.2.5. Installation ................................................................................................................................................................... 209
13.2.6. Check .............................................................................................................................................................................. 210
13.3. Datalogger.............................................................................................................................................................................. 214
13.3.1. Preliminary notes on how to configure the datalogger............................................................................. 214
13.3.2. Electrical connections and configuration........................................................................................................ 216
13.3.3. ZSM-DATALOG-04 AND ZSM-DATALOG-10 Devices.................................................................................. 220
13.3.4. WI-FI CONFIGURATION.......................................................................................................................................... 220
13.3.5. Ethernet configuration............................................................................................................................................ 220
13.3.6. Checking that the datalogger has been configured correctly.................................................................. 228
13.4. ZSM-RMS001/M200 and ZSM-RMS001/M1000 Devices................................................................................... 231
13.4.1. Mechanical description and Datalogger interface ....................................................................................... 231
13.4.2. Connecting the Datalogger to the inverters ................................................................................................... 232
13.4.3. Internet connection via Ethernet cable............................................................................................................ 232
13.4.4. Connecting the power supply and battery pack to the Datalogger ...................................................... 232
13.4.5. Connecting the LM2-485 PRO cell irradiation and temperature sensor to the datalogger........ 233
13.4.6. Configuring the Datalogger ................................................................................................................................... 234
13.4.7. Configuring the Datalogger on the ZCS Azzurro portal ............................................................................. 236
13.4.8. Network configuration............................................................................................................................................ 237
13.4.9. Local monitoring........................................................................................................................................................ 238
13.4.10. Requirements for installation of local monitoring ...................................................................................... 238
13.4.11. Features of local monitoring................................................................................................................................. 239
14. Warranty terms and conditions.............................................................................................................................................. 240

User Manual 1PH HYD3000-HYD6000-ZSS-HP
Rev. 1.2 24/04/2023
Identification: MD-AL-GI-00 (System info)
Rev. 1.1 of 07/03/2022
- Application: GID
6/240

User Manual 1PH HYD3000-HYD6000-ZSS-HP
Rev. 1.2 24/04/2023
Identification: MD-AL-GI-00 (System info)
Rev. 1.1 of 07/03/2022
- Application: GID
7/240
General instructions
This manual contains important safety precautions that must be followed and observed during the installation
and maintenance of the equipment.
Keep these instructions!
This manual must be considered an integral part of the equipment, and must be available at all times to
everyone who interacts with the equipment. The manual must always accompany the equipment, even when
it is transferred to another user or plant.
Copyright statement
The copyright of this user manual belongs to Zucchetti Centro Sistemi S.p.A. No part of this manual (including
the software, etc.) may be copied, reproduced or distributed in any form or by any means without the
permission of Zucchetti Sistemi S.p.A. All rights reserved. ZCS reserves the right of final interpretation. This
manual is subject to change based on feedback from users, installers or customers. Please consult our website
at http://www.zcsazzurro.com for the latest version.
Technical support
ZCS offers a technical support and advice service that can be accessed by making a request directly from the
website www.zcsazzurro.com
The following toll-free number is available for Italy: 800 72 74 64.

User Manual 1PH HYD3000-HYD6000-ZSS-HP
Rev. 1.2 24/04/2023
Identification: MD-AL-GI-00 (System info)
Rev. 1.1 of 07/03/2022
- Application: GID
8/240
Preface
General information
Please read this manual carefully before proceeding with installation, operation or maintenance.
This manual contains important safety precautions that must be followed and observed during the installation
and maintenance of the equipment.
Scope
This manual describes the assembly, installation, electrical connections, commissioning, maintenance and
troubleshooting of the 1PH HYD3000-HYD6000-ZSS-HP hybrid inverter.
Keep this manual so that it is accessible at all times.
Recipients
This manual is intended for qualified technical personnel (installers, technicians, electricians, technical support
personnel or anyone who is qualified and certified to operate a photovoltaic system), who are responsible for
installing and starting up the inverter in the photovoltaic system and storage system, and also for operators of
this system and storage systems.

User Manual 1PH HYD3000-HYD6000-ZSS-HP
Rev. 1.2 24/04/2023
Identification: MD-AL-GI-00 (System info)
Rev. 1.1 of 07/03/2022
- Application: GID
9/240
1. Introduction
The 1PH HYD3000-HYD6000-ZSS-HP hybrid inverter is used in photovoltaic systems with battery storage. The
system can be combined with AZZURRO, WECO and PYLONTECH batteries supplied in kit form by ZCS Azzurro.
The energy produced by the photovoltaic system will be optimised for maximum self-consumption.
The 1PH HYD3000-HYD6000-ZSS-HP inverter can operate in automatic mode and in charge mode for the time of
use and charge/discharge. In automatic mode, when the energy produced by the PV field is greater than that
required by the utilities, the 1PH HYD3000-HYD6000-ZSS-HP inverter charges the battery using the excess PV
energy, and when it is lower than required, the inverter uses the energy stored in the battery to supply power to
the local load.
In the event of no power supply (or with the inverter in OFF-Grid mode), the 1PH HYD3000-HYD6000-ZSS-HP
inverter can operate in Emergency Power Supply (EPS) mode. The 1PH HYD3000-HYD6000-ZSS-HP inverter will
use both the energy produced by the photovoltaic panels and the energy stored in the battery to supply energy to
the critical load.
Figure 1 - Diagram of a system on which an 1PH HYD3000-HYD6000-ZSS-HP hybrid inverter is installed

User Manual 1PH HYD3000-HYD6000-ZSS-HP
Rev. 1.2 24/04/2023
Identification: MD-AL-GI-00 (System info)
Rev. 1.1 of 07/03/2022
- Application: GID
10/240
2. Preliminary safety instructions
Before installation, please read this manual carefully and make sure you fully understand its contents The 1PH
HYD3000-HYD6000-ZSS-HP inverter fully complies with the safety, design and testing regulations provided for
by the national regulations.
During installation, operation and maintenance, operators must strictly comply with the local safety regulations.
Improper use may result in electric shock and injury, as well as damage to the equipment and its parts.
Contact Zucchetti Centro Sistemi S.p.A. for any doubts or problems. DO NOT carry out repairs yourself, as this
could cause injury or damage.
Make sure that the operator has the necessary skills and training to use the equipment. Personnel in charge of the
operation and maintenance of the equipment must be qualified and capable of performing the tasks described,
and must have adequate knowledge of how to correctly interpret the contents of this manual. For safety reasons,
the inverter may only be installed by a qualified electrician who has the necessary training and/or skills and
knowledge. Zucchetti Centro Sistemi S.p.A. accepts no liability for material damage or injury caused by improper
use of the device.
Install and start the inverter according to the following instructions. Place the inverter on suitable load-bearing
supports with sufficient load capacity (such as walls or racks) and ensure that the inverter is positioned vertically.
Choose a suitable location for installation of the electrical equipment. Make sure that there is enough space for
heat dissipation and future maintenance. Maintain adequate ventilation and ensure that there is enough air
circulation for cooling.
In case of problems with the packaging that could damage the inverter or if visible defects are found, please notify
the transport company immediately. If necessary, request the assistance of a PV installer or Zucchetti Centro Spas
SpA. The equipment must be transported by means of vehicles suitable to protect the components (especially the
electronic components) against violent knocks, humidity, vibrations, etc.
2.1. Safety Notes
•The electrical installation and maintenance of the system must be carried out by qualified and certified
electricians in accordance with the national regulations.
•The 1PH HYD3000-HYD6000-ZSS-HP inverter may only be installed by qualified personnel and anyone
holding the appropriate certification, as required by local authorities.
•DO NOT place explosive or flammable materials (e.g. gasoline, kerosene, oil, wood, cotton or similar) near the
batteries or the 1PH HYD3000-HYD6000-ZSS-HP inverter.
•Before maintenance, disconnect the AC connection, then the batteries and the photovoltaic system (PV1 and
PV2), wait at least 5 minutes (capacitor discharge time) to avoid electric shock.
•The 1PH HYD3000-HYD6000-ZSS-HP inverter must be completely disconnected (BAT, PV and AC) during
maintenance.

User Manual 1PH HYD3000-HYD6000-ZSS-HP
Rev. 1.2 24/04/2023
Identification: MD-AL-GI-00 (System info)
Rev. 1.1 of 07/03/2022
- Application: GID
11/240
•The 1PH HYD3000-HYD6000-ZSS-HP inverter can reach high temperatures and contains moving parties
during operation. Switch off the 1PH HYD3000-HYD6000-ZSS-HP inverter and wait for it to cool down before
performing any maintenance.
•Keep children away from the batteries and from the 1PH HYD3000-HYD6000-ZSS-HP inverter.
•Do not open the front cover of the 1PH HYD3000-HYD6000-ZSS-HP inverter. Opening the front cover
invalidates the product warranty.
•Damage caused by improper installation/operation is NOT covered by the product warranty.

User Manual 1PH HYD3000-HYD6000-ZSS-HP
Rev. 1.2 24/04/2023
Identification: MD-AL-GI-00 (System info)
Rev. 1.1 of 07/03/2022
- Application: GID
12/240
2.2. Assembly and maintenance diagram
•The batteries must be protected against short circuits during transport and installation.
•The inverter 1PH HYD3000-HYD6000-ZSS-HP inverter and batteries must be placed in well-ventilated
areas. Do not positive the 1PH HYD3000-HYD6000-ZSS-HP inverter or batteries in a cabinet or in an airtight
or poorly ventilated location. This could be extremely hazardous to the performance and life of the system.
•Keep the 1PH HYD3000-HYD6000-ZSS-HP inverter and batteries away from direct sunlight. Do not bring
the 1PH HYD3000-HYD6000-ZSS-HP inverter and batteries near ovens, flames or other heat sources as the
battery may catch fire and cause an explosion.
•Use a multimeter to check the battery polarity and voltage before switching on the unit. Make sure that the
connections are made according to the instructions in this manual.
•Use the multimeter to check the PV voltage and polarity before closing the PV switch. Make sure that the
connections are made according to the instructions in this manual.
•If you would like to preserve the batteries without using them, disconnect them from the 1PH HYD3000-
HYD6000-ZSS-HP inverter and store them in a cool, dry and well-ventilated area.
•Battery maintenance personnel must have the necessary training and knowledge to perform this task.
•The 1PH HYD3000-HYD6000-ZSS-HP inverter does not have an isolation transformer, therefore, the
positive and negative polarities of the PV string do NOT have to be grounded, otherwise the inverter may
be damaged. All metal parts not under load (e.g. the PV module frame, PV rack, connection box housing and
inverter housing) in the PV power supply system must be grounded.
•Attention: Do not dismantle or break the battery. Electrolytes in the battery can be toxic and cause skin or
eye injuries.
•Attention: follow these rules when installing and maintaining the battery.
a) Remove watches, rings and other metal objects.
b) Only use tools with insulated handles.
c) Wear rubber gloves and shoes.
d) Do not place tools or metal objects on top of the battery.
e) Switch off the 1PH HYD3000-HYD6000-ZSS-HP inverter and batteries before
connecting/disconnecting the battery terminals
f) Both positive and negative polarities must be isolated from the ground.

User Manual 1PH HYD3000-HYD6000-ZSS-HP
Rev. 1.2 24/04/2023
Identification: MD-AL-GI-00 (System info)
Rev. 1.1 of 07/03/2022
- Application: GID
13/240
2.3. Symbols on the inverter
Some safety symbols are present on the inverter. Before installing the inverter, it is important to read and
understand the contents of the symbols.
This symbol indicates a hazardous situation which, if not avoided, will result in
injury.
Risk of electric shock; wait at least 5 minutes before switching off the 1PH
HYD3000-HYD6000-ZSS-HP inverter.
Beware of high voltage and electric shock.
Beware of hot surfaces.
Compliance with European Conformity Certification (CE).
Ground terminal.
Read this manual before installing the 1PH HYD3000-HYD6000-ZSS-HP inverter.
Indicates the degree of protection of the equipment according to IEC 70-1 (EN
60529 June 1997).

User Manual 1PH HYD3000-HYD6000-ZSS-HP
Rev. 1.2 24/04/2023
Identification: MD-AL-GI-00 (System info)
Rev. 1.1 of 07/03/2022
- Application: GID
14/240
Positive polarity and negative polarity of the DC voltage (Photovoltaic and
Battery).
This side up. The 1PH HYD3000-HYD6000-ZSS-HP inverter must always be
transported, handled and stored in such a way that the arrows are always
pointing upwards.

User Manual 1PH HYD3000-HYD6000-ZSS-HP
Rev. 1.2 24/04/2023
Identification: MD-AL-GI-00 (System info)
Rev. 1.1 of 07/03/2022
- Application: GID
15/240
3. Installation
3.1. Product overview
The 1PH HYD3000-HYD6000-ZSS-HP inverter is subjected to strict controls and inspection before packaging and
delivery. Do not turn the 1PH HYD3000-HYD6000-ZSS-HP inverter upside down during delivery.
Carefully check the packaging and accessories before installation.
Caution
Figure 2 - Diagram of a system on which an 1PH HYD3000-HYD6000-ZSS-HP hybrid inverter is installed
1 Battery input terminals 6 Connection port 1
2 DC switch 7 COM
3 PV input terminals 8 Grid connection port
4 Wi-Fi/GPRS/Ethernet USB adapter 9 Critical load connection port
5 Connection port 0 10 LCD

User Manual 1PH HYD3000-HYD6000-ZSS-HP
Rev. 1.2 24/04/2023
Identification: MD-AL-GI-00 (System info)
Rev. 1.1 of 07/03/2022
- Application: GID
16/240
3.2. Package contents
Carefully inspect the packaging and accessories before installation. The package must contain the following
accessories:
1 x Inverter
1 x rear panel
2 x PV+ input terminals
2 x PV- input terminals
2 x metal terminals fixed to PV+ input
power cables
2 x metal terminals fixed to
PV- input power cables
1 x BAT+ input terminal
1 x BAT- input terminal
3 x M6 hexagonal screws
4 x M8x80 expansion bolts use
to fix the mounting bracket to
the wall
1 x AC grid connector (grid)
1 x critical load output
connector (load)
1 x connector for the connection port
(parallel system)
1 x 8-pin terminal
Corresponding terminating
resistor
(parallel system)
1 x current transformer
1 x 16-pin connector
2 x communication cables
1 x user manual
1 x warranty
1 x quality certificate
Table 1 – Components and accessories inside the package

User Manual 1PH HYD3000-HYD6000-ZSS-HP
Rev. 1.2 24/04/2023
Identification: MD-AL-GI-00 (System info)
Rev. 1.1 of 07/03/2022
- Application: GID
17/240
3.3. Installation area
•Choose a dry, clean and tidy place suitable for installation.
•Ambient temperature range: -25 ~ 60 °C.
•Relative humidity: 0 ~ 100% (without condensation).
•Install the 1PH HYD3000-HYD6000-ZSS-HP inverter in a well-ventilated area.
•Do not place flammable or explosive materials near the 1PH HYD3000-HYD6000-ZSS-HP inverter.
•The AC overvoltage of the 1PH HYD3000-HYD6000-ZSS-HP inverter belongs to Category III.
•Maximum altitude: 4000 m.
3.4. Installation tools
Prepare the following tools before installation:
Number Tool Model Function
1
Percussion drill
Recommended diameter: 10 mm For drilling holes in the wall
2
Screwdriver For wiring
3
Cross screwdriver For removing and installing the AC
terminal screws
4
Cable stripper For stripping wires
5
Removal tool For removing the PV terminal

User Manual 1PH HYD3000-HYD6000-ZSS-HP
Rev. 1.2 24/04/2023
Identification: MD-AL-GI-00 (System info)
Rev. 1.1 of 07/03/2022
- Application: GID
18/240
6
4 mm Allen key
For tightening the screws to
connect the rear panel to the
inverter
7
Crimping tools For crimping the power cables
8
Multi-meter For checking the ground connection
9
Marker For marking
10
Tape measure For measuring distances
11
Spirit level For making sure that the rear
panel is installed correctly
12
ESD gloves Must be worn by operators
13
Safety goggles Must be worn by operators
14
Dust mask Must be worn by operators

User Manual 1PH HYD3000-HYD6000-ZSS-HP
Rev. 1.2 24/04/2023
Identification: MD-AL-GI-00 (System info)
Rev. 1.1 of 07/03/2022
- Application: GID
19/240
3.5. Wall installation position
The 1PH HYD3000-HYD6000-ZSS-HP inverter must be mounted vertically (to ensure rapid heat dissipation).
Install the 1PH HYD3000-HYD6000-ZSS-HP inverter in a location protected from direct sunlight and possible
snow accumulation. Ensure that the installation position is well ventilated.
Figure 3 – Installation position of the 1PH HYD3000-HYD6000-ZSS-HP inverter