Zultys ZIP 33G User manual

Configuring your Phone
Quick Installation Guide
Configuration of the phone is centrally managed from the Zultys MX IP phone system. For
most deployments the phone will receive an IP address from the DHCP server on the local
network. For the phone to automatically download its configuration information the DHCP
server must have Option 66 enabled and configured with the address of the Zultys MX IP
phone system.
80mm/3.15”
96-35333-01
Wall Mount Drilling Template
Drill two holes vertically spaced 80mm/3.15” apart.
After the IP phone is connected to the network
and supplied with power, it automatically
begins a process of initializing on the network
and downloading it's configuration information.
Contact your system administrator if the phone
fails to register with the IP phone system.
Startup
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
ZIP 33G Business Phone
www.zultys.com
ZIP 33G

Stand &
Wall Mount
Power Adapter
(optional)
Handset Cord
Handset
IP Phone
Ethernet Cable Quick Installation
& Quick Reference
PC Connection
(Optional)
IEEE 802.3af compliant
PoE Switch
You have two options for network and power connections. Your system administrator will
advise you on which one to use.
Power Adapter
(DC 5V)
PC Connection
(Optional)
ZIP 33G Quick Installation
1. Attach the stand, as shown below:
2. Programmable Key Label Installation
4. Connect the network and power, as shown below:
a. AC Power Option
b. PoE (Power over Ethernet) Option
The following items are included in your package. The power adapter is optional. If you find
anything missing, contact your system administrator.
Packing List
Assembling the Phone
Note: If the PoE (Power over Ethernet) option is used, the power adapter is not required.
Desk Mount Method
Wall Mount Method
Network
ZIP 33G Quick Installation
Key Label Set
Note: Headset purchased separately.
3. Connect the handset and optional headset, as shown below:
A set of pre-printed labels for the programmable keys is provided. To change the installed
label remove the clear plastic cover using a paper clip or similar, insert the required label
followed by the clear plastic cover.
33G
Note: We recommend that you use the accessories provided or approved by reseller. The use of
unapproved third-party accessories may result in reduced performance.
Note: The IP phone should be used with original power adapter (5V/600mA) only. The use of the
third-party power a dapter may cause the damage to the phone.