2N Access Unit M User manual

www.2n.cz
Access Unit M
Access Control
Installation manual
Version: 1.0

The 2N TELEKOMUNIKACE a.s. is a Czech manufacturer and supplier of
telecommunications equipment.
The product family developed by 2N TELEKOMUNIKACE a.s. includes GSM gateways,
private branch exchanges (PBX), and door and lift communicators. 2N
TELEKOMUNIKACE a.s. has been ranked among the Czech top companies for years
and represented a symbol of stability and prosperity on the telecommunications
market for almost two decades. At present, we export our products into over 120
countries worldwide and have exclusive distributors on all continents.
2N is a registered trademark of 2N TELEKOMUNIKACE a.s. Any product and/or other
®
names mentioned herein are registered trademarks and/or trademarks or brands
protected by law.
2N TELEKOMUNIKACE a.s. administers the FAQ database to help you quickly find
information and to answer your questions about 2N products and services. On www.
faq.2n.cz you can find information regarding products adjustment and instructions for
optimum use and procedures „What to do if...".
2N TELEKOMUNIKACE a.s. hereby declares that the 2N product complies with all
basic requirements and other relevant provisions of the 1999/5/EC directive. For the
full wording of the Declaration of Conformity see the CD-ROM (if enclosed) or our
website at www.2n.cz.
The 2N TELEKOMUNIKACE a.s. is the holder of the ISO 9001:2009 certificate. All
development, production and distribution processes of the company are managed by
this standard and guarantee a high quality, technical level and professional aspect of
all our products.

2N TELEKOMUNIKACE a.s., www.2n.cz 3/56
Content
1. Product Overview
1.1 Components and Associated Products
1.2 Terms and Symbols
2. Description of Installation
2.1 Before You Start
2.2 Mechanical Installation
2.3 Electric Installation
2.4 Extending Module Connection
3. Detection of 2N Access Unit M using 2N® Network Scanner
4. Factory Reset
5. Maintenance
6. Status Signaling
7. Technical Parameters
7.1 General Drawings
8. Supplementary Information
8.1 General Instructions and Cautions
8.2 Troubleshooting
8.3 Directives, Laws and Regulations

2N TELEKOMUNIKACE a.s., www.2n.cz 4/56
1. Product Overview
Here is what you can find in this section:
1.1 Components and Associated Products
1.2 Terms and Symbols

2N TELEKOMUNIKACE a.s., www.2n.cz 5/56
Basic Features
2N Access Unit M is an elegant and reliable access IP system equipped with a number
of useful functions.
2N Access Unit M is a single-module access system available in several versions.
All the 2N Access Unit M versions include an integrated card reader module which ,
helps control access using an RFID card. With additional software settings, you can
use the card to control more functions than just door lock switching too.
The 2N Access Unit M keypad version helps you control the electric lock switch by
entering a valid numeric code via the numeric keypad. With additional software
settings, you can use the numeric code to control more functions than just door lock
switching too.
The 2N Access Unit M Bluetooth version helps you control the lock switch using the 2N
application installed in your smartphone.Mobile Key
®
2N Access Unit M is designed as a robust, mechanically resistant IP55-rated access
system, which withstands any weather conditions without requiring additional
accessories.
The installation of is very easy. All you have to do is connect the 2N Access Unit M
system to your LAN via a mains cable. Feed the access system either from a 12V
power supply or your PoE supporting LAN.
To configure 2N Access Unit M
use a PC equipped with any Internet browser. Use 2N ®
to bulk manage extensive access system installations easily. Access Commander

2N TELEKOMUNIKACE a.s., www.2n.cz 6/56
Advantages of Use
Elegant mullion design
Weather resistance (IP 55)
Easy wall (surface) mounting (brick/pasterboard walls, door frames)
Integrated electric lock switches with wide setting options
Integrated RFID card reader module
Bluetooth module version
Backlit touch keypad version
LAN (PoE) or external 12V power supply
Configuration using web interface
HTTP server for API configuration
SNTP client for time synchronization
SMTP client for email sending, Picture to Email feature
TFTP/HTTP client for automated firmware and configuration upgrade and
update

2N TELEKOMUNIKACE a.s., www.2n.cz 7/56
1.1 Components and Associated Products
Main Units
Part No. 916112
2N Access Unit M 13.56 MHz, NFC ready
®
is used for reading RFID cards in the 13.56 MHz bandwidth with the
NFC support. Combining an access reader and a controller, the
device is used for access control inside and outside of buildings.
The following RFID cards can be read:
ISO14443A (Mifare, DESFire)
PicoPass (HID iClass)
Felica
ST SR(IX)
2N Mobile Key
®
Part No. 916112-S
2N Access Unit M secured 13.56 MHz, NFC ready
®
is used for reading secured RFID cards in the 13.56 MHz bandwidth
with the NFC support. Combining an access reader and a controller,
the device is used for access control inside and outside of buildings.
The following RFID cards can be read:
ISO14443A (Mifare, DESFire)
PicoPass (HID iClass)
Felica
ST SR(IX)
2N Mobile Key
®
HID SE (Seos, iClass SE, Mifare SE)

2N TELEKOMUNIKACE a.s., www.2n.cz 8/56
Main Units
Part No. 916114
2N Access Unit M RFID 125 kHz, 13.56 MHz, NFC
®
is used for reading RFID cards in the 125 kHz and 13.56 MHz
bandwidths with the NFC support. Combining an access reader and
a controller, the device is used for access control inside and outside
of buildings.
The following RFID cards can be read:
EM4xxx
ISO14443A (Mifare, DESFire)
PicoPass (HID iClass)
Felica
ST SR(IX)
2N Mobile Key
®
Part No. 916114-S
2N Access Unit M RFID 125 kHz, secured 13.56 MHz, NFC
®
is used for reading RFID cards in the 125 kHz bandwidth and
secured cards in the 13.56 MHz bandwidth with the NFC support.
Combining an access reader and a controller, the device is used for
access control inside and outside of buildings.
The following RFID cards can be read:
EM4xxx
ISO14443A (Mifare, DESFire)
PicoPass (HID iClass)
Felica
ST SR(IX)
2N Mobile Key
®
HID SE (Seos, iClass SE, Mifare SE)

2N TELEKOMUNIKACE a.s., www.2n.cz 9/56
Main Units
Part No. 916115
2N Access Unit M Bluetooth & RFID 125 kHz, 13.56 MHz, NFC
®
is used for reading RFID cards in the 125 kHz and 13.56 MHz
bandwidths with the NFC support. Combining an access reader, a
Bluetooth module and a controller, the device is used for access
control inside and outside of buildings.
The following RFID cards can be read:
EM4xxx
ISO14443A (Mifare, DESFire)
PicoPass (HID iClass)
Felica
ST SR(IX)
2N Mobile Key
®
Part No. 916115-S
2N Access Unit M Bluetooth & RFID 125 kHz, secured 13.56 MHz,
®
NFC
is used for reading RFID cards in the 125 kHz bandwidth and
secured cards in the 13.56 MHz bandwidth with the NFC support.
Combining an access reader, a Bluetooth module and a controller,
the device is used for access control inside and outside of buildings.
The following RFID cards can be read:
EM4xxx
ISO14443A (Mifare, DESFire)
PicoPass (HID iClass)
Felica
ST SR(IX)
2N Mobile Key
®
HID SE (Seos, iClass SE, Mifare SE)

2N TELEKOMUNIKACE a.s., www.2n.cz 10/56
Main Units
Part No. 916116
2N Access Unit M Touch Keypad & RFID 125 kHz, 13.56 MHz, NFC
®
is used for reading RFID cards in the 125 kHz and 13.56 MHz
bandwidths with the NFC support. Combining an access reader, a
touch keypad and a controller, the device is used for access control
inside and outside of buildings.
The following RFID cards can be read:
EM4xxx
ISO14443A (Mifare, DESFire)
PicoPass (HID iClass)
Felica
ST SR(IX)
2N Mobile Key
®
Part No. 916116-S
2N Access Unit M Touch Keypad & RFID 125 kHz, secured 13.56
®
MHz, NFC
is used for reading RFID cards in the 125 kHz bandwidth and
secured cards in the 13.56 MHz bandwidth with the NFC support.
Combining an access reader, a touch keypad and a controller, the
device is used for access control inside and outside of buildings.
The following RFID cards can be read:
EM4xxx
ISO14443A (Mifare, DESFire)
PicoPass (HID iClass)
Felica
ST SR(IX)
2N Mobile Key
®
HID SE (Seos, iClass SE, Mifare SE)
License
Part No. 916012 2N Access Unit NFC license

2N TELEKOMUNIKACE a.s., www.2n.cz 11/56
License
Part No. 9160401 2N Access Unit Lift module license
Electric Locks
Part No. 932071E BEFO 11211
12 V / 230 mA DC
low consumption
932081EPart No. BEFO 11221 with momentum pin
12 V / 230 mA DC
low consumption
A very short electric pulse is enough to put the lock in the
OPEN position and unlock the door. After passage, the lock
gets in the CLOSED (relax) position again.
932091EPart No. BEFO 11211MB with mechanical blocking
12 V / 230 mA DC
low consumption
You can set the lever mechanically into the OPEN or CLOSED
position. When OPEN, the lock is constantly open, when
CLOSED, it is a standard lock.

2N TELEKOMUNIKACE a.s., www.2n.cz 12/56
Electric Locks
Part No. 932061E BEFO 11211MB with momentary pin, mechanical blocking
low consumption
12 V / 230 mA DC
A regular lock with a built-in contact to indicate whether the
door is open or closed.
Part No. 932072E BEFO 31211
fail safe
12 V / 170 mA DC
The reverse lock is closed when electricity is switched on.
When electricity is interrupted, the lock is opened.
Part No. 932062E BEFO 321211
fail-safe plus door signaling
12 V / 170 mA
The reverse lock is closed when electricity is switched on.
When electricity is interrupted, the lock is opened.
It contains a built-in contact to indicate whether the door is
open or closed.
Tip
FAQ: Electric locks – Differences between locks for 2N IP access systems

2N TELEKOMUNIKACE a.s., www.2n.cz 13/56
Power Supply
Part Numbers
91378100
91378100E
91378100US
PoE injector – without cable
PoE injector – with EU cable
PoE injector – with US cable
For intercom supply via Ethernet cable where the PoE switch is
absent.
Part Nos.
91341482E
91341482US
12 V / 1 A adapter
A stabilized power supply needs to be used where no PoE is
available.
932928Part No. 12 V transformer
for electric lock
Additional Modules
9159010Part No.
Security Relay

2N TELEKOMUNIKACE a.s., www.2n.cz 14/56
Additional Modules
A handy add-on that significantly enhances door
entry security Prevents lock tampering. Installed
between the intercom, from which it is also
supplied, and the lock to be controlled.
Part No. 9159013 Departure button
Connects the logic input for door unlocking from
inside the building.
Part No. 9159012 Magnetic door contact
Set for installation on a door, enabling the status of
door opening to be ascertained. Used when the
intercom is used for door protection, to detect
when the door is not closed or forced open.
9134173 Part No. RFID card, Mifare Classic 1k, 13.56 MHz
Part No. 9134174
RFID fob, Mifare Classic 1k, 13.56 MHz

2N TELEKOMUNIKACE a.s., www.2n.cz 15/56
9134165EPart No. RFID card, type EM4100, 125 kHz
9134166EPart No. RFID fob, type EM4100, 125 kHz
9137420EPart No. External RFID card reader connectable to a PC via a
USB interface.
Suitable for system administration and adding of
EM41xx cards (125 kHz) via a web interface or 2N®
Access Commander .
Part No. 9137421E
USB Reader of 13.56 MHz, 125 kHz RFID Cards and
NFC/HCE devices
External RFID card reader connectable to a PC via a
USB interface. Suitable for system administration
and adding 13.56 MHz, 125 kHz cards and Android
platform devices supporting NFC/HCE using 2N IP
web interface or intercom 2N Access Commander
®
. It reads the same types of cards and devices as
card readers in .2N IP intercoms
13.56 MHz/ISO/IEC 14443A Mifare Classic 1k
& 4k, DESFire EV1, Mini, Plus S&X, Ultralight,
Ultralight C

2N TELEKOMUNIKACE a.s., www.2n.cz 16/56
Additional Modules
13.56 MHz/ISO/IEC 14443B CEPAS, HID
iCLASS (CSN only)
13.56/JIS X 6319 Felica
ISO/IEC 18092 SmartPhone with NFC/HCE
support, Android version 6.0 Marshmallow
and higher ( required)2N Mobile Key
®
EMarine
Part No. 9137424E Secured USB Reader of 13.56 MHz, 125 kHz RFID
Cards and NFC/HCE devices
External secured RFID card reader connectable to a
PC via a USB interface. Suitable for system
administration and adding 13.56 MHz, 125 kHz cards
and Android platform devices supporting NFC/HCE
using the web interface or 2N IP intercom 2N®
. It reads the same types of Access Commander
cards and devices as card readers in2N IP intercoms
.
13.56 MHz/ISO/IEC 14443A Mifare Classic 1k
& 4k, DESFire EV1, Mini, Plus S&X, Ultralight,
Ultralight C
13.56 MHz/ISO/IEC 14443B CEPAS, HID
iCLASS (CSN or PAC ID)
13.56MHz/JIS X 6319 Felica
ISO/IEC 18092 SmartPhone with NFC/HCE
support, Android version 6.0 Marshmallow
and higher ( required)2N Mobile Key
®
EMarine
Part No. 9137410E
External IP relay – 1 output
A stand-alone IP device, which can be controlled
HTTP from an IP intercom via commands, which can
thus control devices on unlimited distance.

2N TELEKOMUNIKACE a.s., www.2n.cz 17/56
9137411EPart No. External IP relay – 4 outputs, PoE
A stand-alone IP device, which can be controlled
HTTP from an IP intercom via commands, which can
thus control devices on unlimited distance.
Part No. 9159014EU/US/UK
2Wire2N®
(set of 2 adapters plus EU/US/UK power supply)
The converter allows you to use the 2N® 2Wire
existing 2-wire cabling from your original door bell
or door intercom to connect any IP device. You do
not have to configure anything, all you need is one
unit at each end of the cable and a 2N® 2Wire
power supply connected to at least one of these
units. then provides power not only 2N® 2Wire PoE
to the second converter, but also to all the other IP
end devices connected.
Part No. 9160501 AXIS A9188 Network I/O relay module
Lift control relay module for up to 8 floors

2N TELEKOMUNIKACE a.s., www.2n.cz 18/56
Tip
Refer to the local 2N distributor for more accessories and
recommendations please.

2N TELEKOMUNIKACE a.s., www.2n.cz 19/56
1.2 Terms and Symbols
The following symbols and pictograms are used in the manual:
Safety
Always abide by this information to prevent persons from injury.
Warning
Always abide by this information to prevent damage to the device.
Caution
Important information for system functionality.
Tip
Useful information for quick and efficient functionality.
Note
Routines or advice for efficient use of the device.

2N TELEKOMUNIKACE a.s., www.2n.cz 20/56
2. Description of Installation
Here is what you can find in this section:
2.1 Before You Start
2.2 Mechanical Installation
2.3 Electric Installation
2.4 Extending Module Connection