2N Access Unit User manual
The 2N TELEKOMUNIKACE a.s. is a Czech manufacturer and supplier of telecommunications
equipment.
The product family developed by 2N TELEKOMUNIKACE a.s. includes GSM gateways, private
branch exchanges (PBX), and door and lift communicators. 2N TELEKOMUNIKACE a.s. has
been ranked among the Czech top companies for years and represented a symbol of
stability and prosperity on the telecommunications market for almost two decades. At
present, we export our products into over 120 countries worldwide and have exclusive
distributors on all continents.
2N is a registered trademark of 2N TELEKOMUNIKACE a.s. Any product and/or other
®
names mentioned herein are registered trademarks and/or trademarks or brands protected
by law.
2N TELEKOMUNIKACE a.s. administers the FAQ database to help you quickly find
information and to answer your questions about 2N products and services. On
www.faq.2n.cz you can find information regarding products adjustment and instructions for
optimum use and procedures „What to do if...“.
2N TELEKOMUNIKACE a.s. hereby declares that the 2N product complies with
®Access Unit
all basic requirements and other relevant provisions of the 1999/5/EC directive. For the full
wording of the Declaration of Conformity see the CD-ROM (if enclosed) or our website at
www.2n.cz.
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
The 2N TELEKOMUNIKACE a.s. is the holder of the ISO 9001:2009 certificate. All
development, production and distribution processes of the company are managed by this
standard and guarantee a high quality, technical level and professional aspect of all our
products.
Content
Content
1.
Product Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
1.1Components and Associated Products ............................... 6
1.2Terms and Symbols . . . . . . . . . . . . . . . . .............................. 22
2.
Description and Installation . . . . . . . . . . . . . . . . . . . . . . . . . 23
2.1Before You Start ................................................ 24
2.2Mechanical Installation ........................................... 25
2.3Electric Installation............................................. .. 92
2.4Extending Module Connection ....................................97
2.5Mounting Completion ............................................107
3.
. Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.
Technical Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111
5.
Supplementary Information . . . . . . . . . . . . . . . . . . . . . . . .
5.1Troubleshooting........................................ ......... 114
5.2Directives. Laws and Regulations.................................. . 115
5.3General Instructions and Cautions..................................117
110
113
42N TELEKOMUNIKACE a.s., www.2n.cz
®
1. Product Overview
Here is what you can find in this section:
1.1 Components and Associated Products
1.2 Terms and Symbols
Basic Properties
2N® Access Unit is an elegant and reliable access IP system equipped with a number
of useful functions, which are not always common in devices of this category.
2N® Access Unit is a modular access system meeting all individual user needs.
Unlike other access systems available on the market, is not a2N
®Access Unit
single-module system with given functionality, but a user friendly modular system,
allowing the user to a assemble a number of modules and accessories on a “plug and
play” basis. This approach provides individual configuration options and increase in
functionality as necessary.
Keypad – the numeric keypad module allows you to use the intercom as a code lock
for lock switch activation or phone number/user number calling.
Integrated card reader - the integrated card reader module provides the RFID card
access control functionality. With additional software settings, the card can control
more functions than the door lock only.
Electric lock switch – the electric lock switch can be controlled via a numeric keypad,
PC application or any phone during a call. The switch can be completed with additional
output modules if necessary. A wide range of the switch mode settings provide an
infinite number of applications.
Resistance – is designed as a robust, mechanically resistant access2N® Access Unit
system, which withstands any weather conditions without requiring additional
accessories.
The installation is very easy. All you have to do is assemble the2N® Access Unit
required modules and connect the system to your LAN via a mains cable. Being of the
“plug and play” type, the modules need not be configured individually. Feed the
52N TELEKOMUNIKACE a.s., www.2n.cz
®
intercom either from a 12V power supply or directly from your PoE-supporting LAN.
To configure 2N® Access Unit , you need a PC equipped with any Internet browser.
Use the to manage extensive intercom installations easily.2N® Access Commander
Advantages of Use
Elegant design
Weather resistance
Variable mounting options (brick/plasterboard flush mounting, wall mounting)
Optional numeric keypad with backlight
Use of multiple modules of the same type - e.g. building entrance/exit card
reader
Integrated electronic lock switches with wide setting options
Integrated RFID card reader module
LAN (PoE) or external 12V power supply
Configuration via web interface or special PC application
HTTP server for configuration
SNTP client for server time synchronisation
SMTP client for e-mail sending
TFTP/HTTP client for automatic configuration and firmware update
62N TELEKOMUNIKACE a.s., www.2n.cz
®
1.1 Components and Associated Products
Basic Units
Part No. 916010
2N Access Unit
®
Tip
There may be just one basic unit in an installation. The basic unit
installation requires one frame/box position, the other positions are
available for other modules.
Supported modules:
all the modules supported: RFID card reader2N Helios IP Verso
®are
(125kHz; 13.56MHz), keypad, 5-button module, Wiegand, etc.
72N TELEKOMUNIKACE a.s., www.2n.cz
®
Frames
9155011 Part No.
Flush mounting frame, 1-module
Covering frame for the 1-module
brick/plasterboard flush mounting box.
This 1-module frame is used when a
module is added to an existing installation
or a separate module is mounted onto an
extended interconnecting cable, for an OUT
card reader, for example. Remember to
order the frame when you order a
1-module flush mounting box, Part No.
9155014.
Part No.
9155012
Flush mounting
frame, 2-module
Covering frame for
the 2-module
brick/plasterboard
flush mounting
box. Remember to
order the frame
when you order a
2-module flush
mounting box, Part
No. 9155015.
Part No. 9155013
Flush mounting
frame, 3-module
Covering frame for
the 3-module
brick/plasterboard
flush mounting
box. Remember to
order the frame
when you order a
3-module flush
mounting box, Part
No. 9155016.
82N TELEKOMUNIKACE a.s., www.2n.cz
®
9155021Part No.
Wall mounting frame, 1-module
Covering frame for wall (surface) mounting. This
1-module frame is used when a module is added to
an existing installation or a separate module is
mounted onto an extended interconnecting cable,
for an OUT card reader, for example.
Part No.
9155022
Wall mounting
frame,
2-module
Covering frame
for wall
(surface)
mounting.
Part
No. 9155023
Wall mounting
frame,
3-module
Covering
frame for wall
(surface)
mounting.
Tip
The 1-module frame is used when a module is added to an existing
installation or a separate module is mounted onto an extended
interconnecting cable, for an OUT card reader, for example.
Tip
Remember to order the flush mounting frame when you order a
brick/plasterboard flush mounting box: i:
1-module frame, – 1-module flush mountingPart No. 9155011
box, .Part No. 9155014
2-module frame, – 2-module flush mountingPart No. 9155012
box, .Part No. 9155015
3-module frame, – 3-module flush mountingPart No. 9155013
box, .Part No. 9155016
92N TELEKOMUNIKACE a.s., www.2n.cz
®
9155030Part No.
2N Helios IP Verso
® –
Infopanel
The Infopanel module helps
you place such information as
building number, opening
hours and similar into the
intercom installation. The
Infopanel has
software-controlled backlight.
9155031Part No.
2N Helios IP Verso
® – Keypad
The numeric keypad module helps you dial a
user via its phone directory position or
phone number and enter a numeric code to
control a lock and/or other functions. The
keypad digits and symbols are backlight.
Part No.
9155032
2N Helios IP
®
Verso – RFID
Card Reader
125 kHz
The card reader
module helps
you control
access with
contactless
cards or key
fobs. The
module
supports the
125kHz
EM-41xx or HID
Proximity
cards.
Extending Modules
102N TELEKOMUNIKACE a.s., www.2n.cz
®
Part No. 9155033
2N Helios IP Verso
® – RFID
Card Reader 13.56 MHz
The card reader module helps
you control access with
contactless cards or key fobs.
The module supports the
13.56MHz cards or carriers.
ISO14443A Mifare Classic
1k & 4k, DESFire EV1, Mini,
Plus S&X, SmartMX,
Ultralight, Ultralight C,
SLE44R35, my-d move
(SLE66Rxx), PayPass, Legic
Advant
ISO14443B Calypso, CEPAS,
Moneo, SRI512, SRT512,
SRI4K, SRIX4K, PicoPass,
HID iCLASS
Part No. 9155034
2N Helios IP Verso
® – I/O Module
The logic input/output module helps you
integrate various sensors and control doors
and other equipment. The module is
installed under another module, i.e. requires
no separate position.
Part No.
9155035
2N Helios IP
®
Verso –
Buttons
The module
with 5
mechanical
buttons
provides quick
dialling of
users. The
buttons are
backlit and can
be equipped
with name
tags.
Part No. 9155036
–2N Helios IP Verso
®
Electronic Buttons
The module with 5 electronic
buttons provides quick dialing
of users via the phone
directory. Use the arrow
buttons to scroll over five
positions in the phone
directory. Press the button
next to the name to choose
an item in the selected group
of five names.
Part No. 9155037
2N Helios IP Verso
® – Wiegand Module
The Wiegand module helps you interconnect
your system with other systems via the
Wiegand interface. The module is installed
under another module, i.e. requires no
separate position.
Part No.
9155038
2N Helios IP
®
Verso –
Tamper Switch
The tamper
switch detects
any intercom
opening or
upper cover
removal. The
module is
installed on a
special place
and so requires
no separate
position.
Other manuals for Access Unit
5
Table of contents
Other 2N IP Access Controllers manuals
