Basic Properties
2N Access Unit
® is an elegant and reliable access IP system equipped with a number
of useful functions, which are not always common in devices of this category.
2N Access Unit
®is a modular access system that meets all individual user needs.
Unlike other access systems available on the market, is not a single-2N Access Unit
®
module system with a fixed functionality, but a user friendly modular system, allowing
the user to assemble required modules and accessories on a “plug and play” basis.
This approach provides individual configuration options and increase in functionality
as necessary.
Keypad is a numeric keypad module that allows you to use the device for code lock
switch activation.
Integrated card reader module provides the RFID card access control functionality.
With additional software settings, you can control more functions than the door lock
using the card.
Electric lock switch – this switch can be can be controlled via a numeric keypad or
Automation actions. The switch can be completed with additional output modules if
necessary. A wide range of the switch mode settings provide an infinite number of
applications.
Resistance – is designed as a robust, mechanically resistant access 2N Access Unit
®
system, which withstands any weather conditions without requiring additional
accessories.
Installation of is very easy. All you have to do is assemble the 2N Access Unit
®
required modules and connect the system to your LAN via a mains cable. Being of the
“plug and play” type, the modules need not be configured individually. Feed the
intercom either from a 12 V power supply or directly from your PoE-supporting LAN.
To configure 2N Access Unit
®, you need a PC equipped with any Internet browser. To
manage extensive intercom installations easily, use the .2N Access Commander
®
