3M Cavius 9003-002 User manual

PRODUCT NUMBER: 9003-002PRODUCT TYPE: MOUNTING BASE WITH PROBE

PRODUCT DATA:
CAVIUS wall mounting base with probe is an accessory option which can be used with
CAVIUS ood alarm, for installation in basements with risk of ooding or areas with
difcult accessibility.
Mounting base is screwed on the wall by the enclosed screws, and the probe is placed
on the oor.
The operation is convenient and easy:
1. The base can be used with CAVIUS Flood alarms.
2. Remove protective lm from the base.
3. Press the base with inserted ood alarm for about 10 seconds at a suitable place on
the wall, and the probe on the floor.
Make sure that the probe reaches required level either to the ground or down the drain.
4. Turn the alarm until it clicks all the way in and can’t be turned - then it is correct position.
Suitable for vinyl wallpaper, polystyrene, non-stick and Silicon Coatings.
PRODUCT TYPE: MOUNTING BASE WITH PROBE PRODUCT NUMBER: 9003-002
DISTRIBUTOR: