80/20 Xtreme DIY User manual

XDIY1404

WORKBENCH
Add Legs to Bracket
Add legs to front of vertical
supports on wall bracket. Align
pad on top of leg underneath
horizontal bar bracket.
44
Table Top Assembly
Folding Leg Assembly
Slide on Table Frame
Wall Bracket Assembly
Install Panel to Frame
Build your table top in a
“U” shape, sliding supports
in one by one, and tighten
down rmly.
Slide two folding leg bars onto
45º support and tighten. Add
bearing pad to top bar. Install
hinges to outside of leg.
Slide table top frame onto
wall bracket hinges. Use
folding legs to support table
frame while tightening down.
Here’s a great solution to typical bulky workbenches
and makeshift areas. This Pop-Up Workbench built
with 80/20 saves space while adding functionality to
any garage or shop. It’s strong and lightweight; the
Pop-Up Workbench can hold up to 200 pounds yet
still easily fold down to less than 3 inches from the
wall when not in use.
WHAT YOU NEED TO BUILD – SEE BACK
See the Pop-Up Workbench in
action! Check out the Xtreme
DIY video by 80/20 on YouTube.
Watch Now!
DESIGN TO FIT ANY AREA
FEATURES
HOW
POP-UP
BUILT
IT’S
11
22
55
Mount your horizontal bar to
the wall. Add center hinge
to bottom of bar. Slide in
vertical supports then hinges.
Preload bolts and T-nuts
into panel. Slide panel into
T-slots of table top frame.
Finish with end caps.
33
66
This workbench is completely customizable; it
ts your space so you don’t need to recongure
your garage or move xtures. Unlike
prefabricated options, with the 80/20 Pop-Up
Workbench, you choose a height, width, depth
and color that t your style and your area.
Talk to a design technician today to start
planning your own Pop-Up Workbench!
Use a bearing pad to
hold the top in place
and prevent the bars
from rubbing.
Angled supports are
simple to use and
ready to assemble
with all of the
hardware included.

WHAT YOU NEED TO BUILD
IMPORTANT SAFETY INSTRUCTIONS
Your safety and the safety of others are very important
Warning: The design possibilities of “80/20 Stuff” are seemingly endless. As
the “builder” it is your responsibility to make sure that your design meets the
structural, functional, and safety requirements of your specific application.
Typical concerns when designing this type of application may include,
but are not limited to, maximum weight load, weight distribution, tipping
avoidance and wall anchoring choices, and proper leveling. 80/20 expresses
no guaranty as to the fitness of this design related to any of the above or any
omitted concerns typical of this type of product.
80/20 LIMITED WARRANTY
All 80/20 products are guaranteed to be free of actual defects in material and
workmanship, provided any such defect be reported to 80/20 in writing within
one (1) year of date of purchase. This warranty is limited to replacing or
repairing, at 80/20’s option, any part which, upon 80/20 inspection is found
to have a defect in material and/or workmanship.
DISCLAIMER OF IMPLIED WARRANTIES
No warranty is made by 80/20, express or implied, that 80/20 products as
used in a customer’s design and specifications are fit for that customer’s
specific purpose.
**Apart from the above limited warranty, there are no war ranties,
express, implied, or statutory, including, without limitation, warranties of
merchantability and fitness for a particular purpose, which extend beyond
the description on the face hereof.
LIMITATION OF REMEDIES
Your sole and exclusive remedy under this limited warranty shall be
product repair or replacement as provided herein. 80/20 shall not be liable
for incidental or consequential damages arising out of the use of 80/20
products.
1701 S 400 E, Columbia City, IN 46725 • PH: 260-248-8030 • FAX: [phone] • www.8020.net
80/20®Inc.
The Industrial Erector Set®
© 2014 80/20 Inc.
POP-UP WORKBENCH
1010 2 60 IN 1” x 1” T-Slot Prole at 60 inches
1010 2 21.5 IN 1” x 1” T-Slot Prole at 21.5 inches
1010 2 20.488 IN 1” x 1” T-Slot Prole at 20.488 inches
1010 2 18 IN 1” x 1” T-Slot Prole at 18 inches
1010 2 15 IN 1” x 1” T-Slot Prole at 15 inches
1020 1 60 IN 1” x 2” T-Slot Prole at 60 inches
1050 4 20.488 IN 1” x .5” T-Slot Prole at 20.488 inches
2812 1 10 SQ FT 3/8” Natural Smooth HDPE 60” x 23.625”
12256 7 -- EA Metal Hinge, Non Detachable
2015 6 -- EA 1010 Black End Caps with Push-ins
2025 2 -- EA 1020 Black End Caps with Push-ins
2575 2 -- EA 1010 45 Degree Support at 18 inches
6792 2 -- EA 10 Series Double Keyed White Bearing Pad
3382 8 -- EA 10 Series 1/4-20 Economy T-nut
3395 16 -- EA 10 Series Anchor Fastener Assembly
3405 8 -- EA 1/4-20 x 5/8’ FHSCS
3414 28 -- EA 1/4-20 x 1/2” FHSCS & Economy T-nut
PART
QTY
LENGTH
UNIT
DESCRIPTION
*80/20 Pop-Up Workbench is not intended to sit or stand on. It is capable of supporting a 200 pound static load without failure.