
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY
WARNING! Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when using these units.
9Locate the units in a suitable work area.
9Keep the work area clean, uncluttered and ensure there is adequate lighting.
WARNING! Use the units on level and solid ground, preferably concrete.
9Keep the units clean and tidy in accordance with good workshop practice.
9Keep children and unauthorised persons away from the work area.
8DO NOT use these units for any purpose other than that for which they are designed.
8DO NOT use the units outdoors.
8DO NOT place the units in a damp or wet location or an area where there is condensation.
8DO NOT clean the units with any solvents which may damage the surfaces or the protective coating.
8888 DO NOT move the units with the drawers out. To avoid tipping, open one drawer at a time and close and secure all drawers whilst
moving.
8888 DO NOT step on the drawers.
2. INTRODUCTION
3. SPECIFICATION
Model No: PTB66004 Model No: PTB67506
4. ASSEMBLY
These units are heavy, obtain the help of at least one other person before attempting to unpack them.
Install Handle
TOPCHEST 4 DRAWER 660MM HEAVY-DUTY/
ROLLCAB 6 DRAWER 675MM HEAVY-DUTY
PTB66004, PTB67506
instruction
manual
Wear
protective
gloves
Fig.1 Fig.2
Original Language Version
© Jack Sealey Limited