Aaeon HSB-800I User manual

Half-size SBC HSB-800I
HSB-800I
AMD LX800 Processor
ISA Half-size CPU Card
With DDR, Ethernet,
CompactFlash™&PC/104
HSB-800I Manual Rev. A 3rd Ed.
October 2012

Half-size CPU Card HSB-800I
i
Copyright Notice
This document is copyrighted, 2008. All rights are reserved. The
original manufacturer reserves the right to make improvements to
the products described in this manual at any time without notice.
No part of this manual may be reproduced, copied, translated, or
transmitted in any form or by any means without the prior written
permission of the original manufacturer. Information provided in this
manual is intended to be accurate and reliable. However, the
original manufacturer assumes no responsibility for its use, or for
any infringements upon the rights of third parties that may result
from its use.
The material in this document is for product information only and is
subject to change without notice. While reasonable efforts have
been made in the preparation of this document to assure its
accuracy, AAEON assumes no liabilities resulting from errors or
omissions in this document, or from the use of the information
contained herein.
AAEON reserves the right to make changes in the product design
without notice to its users.

Half-size CPU Card HSB-800I
ii
Acknowledgments
All other products’ name or trademarks are properties of their
respective owners.
 Award is a trademark of Award Software International, Inc.
 CompactFlash™ is a trademark of the Compact Flash
Association.
 AMD, the AMD Arrow logo and combinations thereof are
trademarks of Advanced Micro Devices, Inc.
 Microsoft Windows®is a registered trademark of Microsoft Corp.
 ITE is a trademark of Integrated Technology Express, Inc.
 IBM, PC/AT, PS/2, and VGA are trademarks of International
Business Machines Corporation.
 SoundBlaster is a trademark of Creative Labs, Inc.

Half-size CPU Card HSB-800I
iii
Packing List
Before you begin installing HSB-800I, please make sure that
the following items have been shipped:
• 1701340704 Flat Cable
• 1701400453 ATA-100 Cable
• 1700060192 PS/2 Keyboard & Mouse Cable
• 1709140302 Cable
• 1701200301 Flat Cable
• 170910020A USB Cable
• 1703030501 Wire
• 1701010302 Flat Cable
• HSB-800I CPU Card
• Quick Installation Guide
• CD-ROM for manual (in PDF format) and drivers
If any of these items are missing or damaged, please contact
your distributor or sales representative immediately.

Half-size CPU Card HSB-800I
iv
Contents
Chapter 1 General Information
1.1 Introduction................................................................1-2
1.2 Feature......................................................................1-3
1.3 Specification..............................................................1-4
Chapter 2 Quick Installation Guide
2.1 Safety Precaution......................................................2-2
2.2 Location of Connectors and Jumpers .......................2-3
2.3 Mechanical Drawings................................................2-4
2.4 List of Jumpers..........................................................2-6
2.5 List of Connectors .....................................................2-6
2.6 Setting Jumpers ........................................................2-8
2.7 CFD Voltage 3.3V/5V Selection (JP1) ......................2-9
2.8 Clear CMOS (JP2) ....................................................2-9
2.9 AT/ATX Power Type Selection (JP3)........................2-9
2.10 LCD Clock and Power Selection (JP4) ...................2-9
2.11 Inverter Voltage Selection (JP5) .............................2-9
2.12 Front Panel Connector (FP1)..................................2-10
2.13 Front Panel Connector (FP2)..................................2-10
2.14 RS-232 Serial Port Connector (COM1, COM3, COM4)
.........................................................................................2-10
2.15 RS-232/422/485 Serial Port Connector (COM2).....2-11
2.16 IrDA Connector (IR1)...............................................2-11

Half-size CPU Card HSB-800I
v
2.17 Digital I/O (CN1)......................................................2-11
2.18 LPT Port Connector (LPT1) ....................................2-12
2.19 USB Connector (USB1~3) ......................................2-12
2.20 FAN Connector (CN2).............................................2-13
2.21 Audio Input/ Output/ CD-in/ MIC (CN3)...................2-13
2.22 LCD Inverter (CN4) .................................................2-13
2.23 TFT LCD (CN5).......................................................2-14
2.24 +5VSB Power Connector (CN6) .............................2-16
2.25 AT Power_5V, 12V Connector (CN7) .....................2-16
2.26 LVDS 1, 2 (CN9, CN10)..........................................2-16
2.27 PS2 Keyboard/ Mouse Connector (CN11)..............2-17
2.28 Internal Keyboard Connector (CN12)......................2-17
Chapter 3 Award BIOS Setup
3.1 System Test and Initialization. ..................................3-2
3.2 Award BIOS Setup....................................................3-3
Chapter 4 Driver Installation
4.1 Installation.................................................................4-3
Appendix A Programming The Watchdog Timer
A.1 Programming .........................................................A-2
A.2 ITE8712 Watchdog Timer Initial Program..............A-5
Appendix B I/O Information
B.1 I/O Address Map....................................................B-2
B.2 Memory Address Map............................................B-3

Half-size CPU Card HSB-800I
vi
B.3 IRQ Mapping Chart................................................B-3
B.4 DMA Channel Assignments...................................B-3

Half-size SBC HSB-800I
Chapter 1 General Information 1-1
General
Chapter
1
Information

Half-size SBC HSB-800I
Chapter 1 General Information 1-2
1.1 Introduction
AAEON releases the economic half-size Single Board Computer
(SBC) – HSB-800I, which is designed to target the industrial control
and automation market. HSB-800I is based on AMD LX800
processor, which features the low power consumption and faster
heat spreading to ensure the performance of the product.
HSB-800I supports onboard DDR400 system memory up to 128MB
and the chipset of HSB-800I is AMDLX800 +CS5536. For the
display function, the VGA controller is integrated to the AMD LX 800
processor that supports CRT and LCS simultaneous display.
Moreover, 2D/3D graphics accelerator has been integrated to
provide higher performance to graphic processing. The LCD
interface is up to 24-bit and support LVDS/TTL LCD.
HSB-800I targets the common industrial applications include
factory automation systems and production process control devices.
If you are looking for a cost-effective and reliable solution for your
essential application, HSB-800I definitely is your first choice. For
more detailed product information and instruction, please read the
manual before the installation.

Half-size SBC HSB-800I
Chapter 1 General Information 1-3
1.2 Features
 AMD LX 800 Processor
 Onboard 128MB DDR 400 Memory
 Integrated 2D/3D Graphics Accelerator, VGA Support
CRT/TFT
 10/100/1000Base-TX Ethernet x 1 (10/100 & GbE
Optional)
 USB2.0 x 4/ RS-232 x 3, RS-232/422/485 x 1/ Parallel x
1/ IrDA Port x 1
 Ultra ATA 33 x 1
 Digital I/O
 AC97
 PC/104
 CompactFlash Type II Socket
 Watchdog Function 1~255 Sec.

Half-size SBC HSB-800I
Chapter 1 General Information 1-4
1.3 Specification
System
 Processor AMD LX800
 System Memory Onboard 128MB DDR 400
Memory
 Chipset AMD LX800 + CS5536
 Ethernet PCI 10/100Mbps or
10/100/1000Mbps LAN x 1
(optional), RJ-45 x 1, Realtek
8100C/8110S controller optional
 BIOS Award Plug & Play FWH BIOS –
8Mb ROM
 IDE Interface ATA-33 x 1 channel
 CompactFlash CompactFlash Type II connector
 Expansion Interface ISA, PC/104
 Battery Lithium battery
 Power Requirement AT 5V, 12V
 Operating
Temperature
32oF~140oF (0oC~60oC)
 Board Size 7.3”(L)x 4.8”(W) (185mmx121mm)
 Gross Weight 0.71lb (0.3Kg)

Half-size SBC HSB-800I
Chapter 1 General Information 1-5
Display: Supports CRT and LCD Simultaneous Display
 VGA Controller AMD LX800
 Memory Shared memory up to 16M
 Resolutions 1600x1200 @ 32bpp at 100MHz
for CRT; 1600x1200 @ 24bpp for
LCD
 LCD Interface Up to 24-bit, LVDS/TTL LCD
support
I/O: CS5536
 Serial Port COM x 4 (Internal Pin Header x 4)
COM1, COM3, COM4: RS-232
COM2: RS-232/422/485
 Parallel Port Supports SPP/EPP/ECP mode
 Universal Serial Bus USB2.0 x 4
5x1 pin header x 3
Type A connector x 1
 Floppy Drive Interface Standard FDD port x 1, support up
to one floppy device
 Keyboard & Mouse Mini-DIN PS/2 K/B and Mouse
Connector x 1; Internal keyboard
pin header x 1
 IrDA Supports one IrDA header
 Audio Realtek ALC203 AC97 Codec/
MIC-in/ Line-in/ Line-out/ CD-in

Half-size SBC HSB-800I
Chapter2QuickInstallationGuide2-1
Quick
Installation
Chapter
2
Guide

Half-size SBC HSB-800I
2.1 Safety Precautions
Always completely disconnect the power cord
from your board whenever you are working on
it. Do not make connections while the power is
on, because a sudden rush of power can
damage sensitive electronic components.
Always ground yourself to remove any static
charge before touching the board. Modern
electronic devices are very sensitive to static
electric charges. Use a grounding wrist strap at
all times. Place all electronic components on a
static-dissipative surface or in a static-shielded
bag when they are not in the chassis
Chapter 2 Quick Installation Guide 2-2

Half-size SBC HSB-800I
2.2 Location of Connectors and Jumpers
Component Side
Solder Side
Chapter 2 Quick Installation Guide 2-3

Half-size SBC HSB-800I
2.3 Mechanical Drawing
Component Side
Chapter 2 Quick Installation Guide 2-4

Half-size SBC HSB-800I
Solder Side
0
86.5
0
72.37
21.68
106.91
19.94
157.38
Chapter 2 Quick Installation Guide 2-5

Half-size SBC HSB-800I
2.4 List of Jumpers
The board has a number of jumpers that allow you to configure your
system to suit your application.
The table below shows the function of each of the board's jumpers:
Label Function
JP1 CFD Voltage 3.3V/ 5V Selection
JP2 Clear CMOS
JP3 AT/ATX Power Type Selection
JP4 LCD Clock and Power Selection
JP5 Inverter Voltage Selection
2.5 List of Connectors
The board has a number of connectors that allow you to configure
your system to suit your application. The table below shows the
function of each board's connectors:
Label Function
FP1 Front Panel Connector 1
FP2 Front Panel Connector 2
VGA1 VGA Display Connector
FDD1 Floppy Connector
IDE1 EIDE Connector (Support one IDE device only)
CFD1 Compact Flash Slot (Always master)
COM1/3/4 RS-232 Serial Port Connector
COM2 RS-232/422/485 Serial Port Connector
Chapter 2 Quick Installation Guide 2-6

Half-size SBC HSB-800I
IR1 IrDA Connector
LPT1 LPT Port Connector
USB1~3 USB Connector
USB4 USB Connector
LAN1 10/100 or 100/1000 Base-TX Ethernet
Connector
DIMM1 DDRII SODIMM Slot (Optional)
CN1 Digital I/O
CN2 Fan Connector
CN3 Audio Input/Output/CDin/MIC
CN4 LCD Inverter Power Connector
CN5 TFT LCD Connector
CN6 +5VSB Power Connector
CN7 AT Power_5V,12V Connector
CN8 PC/104 ISA Interface
CN9 LVDS1 Connector
CN10 LVDS2 Connector
CN11 PS2 Keyboard/Mouse Connector
CN12 Internal Keyboard Connector
Chapter 2 Quick Installation Guide 2-7

Half-size SBC HSB-800I
2.6 Setting Jumpers
You configure your card to match the needs of your application by
setting jumpers. A jumper is the simplest kind of electric switch. It
consists of two metal pins and a small metal clip (often protected by
a plastic cover) that slides over the pins to connect them. To “close”
a jumper you connect the pins with the clip.
To “open” a jumper you remove the clip. Sometimes a jumper will
have three pins, labeled 1, 2 and 3. In this case you would connect
either pins 1 and 2 or 2 and 3.
123
Open Closed Closed 2-3
A pair of needle-nose pliers may be helpful when working with
jumpers.
If you have any doubts about the best hardware configuration for
your application, contact your local distributor or sales
representative before you make any change.
Generally, you simply need a standard cable to make most
connections.
Chapter 2 Quick Installation Guide 2-8