Aaeon PCM-8150 User manual

Compact Board PCM-8150
PCM-8150
Intel
®ULV Celeron®M
600MHz, 1.8GHz Processors
Compact Board
With LVDS, 10/100 Ethernet,
6 Channel Audio & Mini PCI
PCM-8150 Rev. A Manual 2nd Ed.
Jan. 2006

Compact Board PCM-8150
i
Copyright Notice
This document is copyrighted, 2006. All rights are reserved. The
original manufacturer reserves the right to make improvements
to the products described in this manual at any time without
notice.
No part of this manual may be reproduced, copied, translated,
or transmitted in any form or by any means without the prior
written permission of the original manufacturer. Information
provided in this manual is intended to be accurate and reliable.
However, the original manufacturer assumes no responsibility
for its use, or for any infringements upon the rights of third
parties that may result from its use.
The material in this document is for product information only
and is subject to change without notice. While reasonable
efforts have been made in the preparation of this document to
assure its accuracy, AAEON assumes no liabilities resulting
from errors or omissions in this document, or from the use of the
information contained herein.
AAEON reserves the right to make changes in the product
design without notice to its users.

Compact Board PCM-8150
ii
Acknowledgments
All other products’ name or trademarks are properties of their
respective owners.
 Award is a trademark of Award Software International, Inc.
 CompactFlash™ is a trademark of the Compact Flash
Association.
 Intel®, Pentium®M, and Celeron®M are trademarks of Intel®
Corporation.
 Microsoft Windows®is a registered trademark of Microsoft Corp.
 ITE is a trademark of Integrated Technology Express, Inc.
 IBM, PC/AT, PS/2, and VGA are trademarks of International
Business Machines Corporation.
 SoundBlaster is a trademark of Creative Labs, Inc.
Please be notified that all other products’ name or trademarks not be
mentioned above are properties of their respective owners.

Compact Board PCM-8150
iii
Packing List
Before you begin installing your card, please make sure that the
following materials have been shipped:
• 1 PCM-8150 CPU Card
• 1 Quick Installation Guide
• 1 CD-ROM for manual (in PDF format) and drivers
• 1 Cooler Fan +Heatsink (For Socket 478 version only)
• 1 Jumper cap
If any of these items should be missing or damaged, please
contact your distributor or sales representative immediately.

Compact Board PCM-8150
iv
Contents
Chapter 1 General Information
1.1 Introduction................................................................1-2
1.2 Features....................................................................1-4
1.3 Specifications............................................................1-5
Chapter 2 Quick Installation Guide
2.1 Safety Precautions....................................................2-2
2.2 Location of Connectors and Jumpers .......................2-3
2.3 Mechanical Drawing..................................................2-6
2.4 List of Jumpers..........................................................2-8
2.5 List of Connectors .....................................................2-9
2.6 Setting Jumpers ........................................................2-11
2.7 ATX Emulation AT Power Selection (JP1)................2-12
2.8 Audio Out Selection (JP2).........................................2-12
2.9 LCD Voltage Selection (JP3) ....................................2-12
2.10 COM4 Ring/+5V/+12V Selection (JP4)...................2-12
2.11 COM3 Ring/+5V/+12V Selection (JP5)...................2-12
2.12 Clear CMOS (JP6) ..................................................2-13
2.13 TV-out Connector (CN1) .........................................2-13
2.14 Audio SPDIF Connector (CN2)...............................2-13
2.15 LVDS Connector (CN4)...........................................2-13
2.16 ATX Power Connector (CN5)..................................2-14
2.17 DVI Connector (CN7)..............................................2-14

Compact Board PCM-8150
v
2.18 Audio Connector (CN8)...........................................2-15
2.19 LAN LED Connector (CN9).....................................2-15
2.20 COM 1/2/3/4 Connector (CN10)..............................2-16
2.21 CPU Fan Connector (CN11)...................................2-17
2.22 Digital I/O-1 Connector (CN12) Address=801H......2-17
2.23 Digital I/O-2 Connector (CN13) Address=800H......2-17
2.24 System Fan Connector (CN16)...............................2-17
2.25 IrDA Connector (CN17)...........................................2-18
2.26 Internal Keyboard and Mouse Connector (CN18)...2-18
2.27 Front Panel Connector (CN19) ...............................2-18
2.28 Floppy Connector (FDD1).......................................2-18
2.29 EIDE Connector (IDE1)...........................................2-19
2.30 VGA Display Connector (VGA1).............................2-20
2.31 LPT Port Connector (LPT1) ....................................2-20
2.32 USB Connector (USB1) ..........................................2-21
2.33 USB Connector (USB2) .........................................2-21
Chapter 3 Award BIOS Setup
3.1 System Test and Initialization. ..................................3-2
3.2 Award BIOS Setup....................................................3-3
Chapter 4 Driver Installation
4.1 Installation.................................................................4-3
Appendix A I/O Information
A.1 I/O Address Map....................................................A-2
A.2 Memory Address Map............................................A-3

Compact Board PCM-8150
vi
A.3 IRQ Mapping Chart................................................A-4
A.4 DMA Channel Assignments...................................A-4
Appendix B Programming The Watchdog Timer
B.1 Programming .........................................................B-2
B.2 IT8712 Watchdog Timer Initial Program................B-7

Compact Board PCM-8150
Chapter1GeneralInformation1-1
General
Chapter
1
Information

Compact Board PCM-8150
Chapter 1 General Information 1-2
1.1 Introduction
PCM-8150 is powered by onboard ULV Intel®Celeron®Processor
at 600MHz Processor or Socket 478-based Pentium®M or
Celeron®M processor up to 1.8GHz. PCM-8150 is an innovative
product that adopts Intel®latest low power consumption platform
but with excellent performance. It is delicately designed for fanless
and low power consumption and simple voltage input required
application. (5V only workable)
The PCM-8150 supports system memory up to 1GB with fast DDR
266MHz providing high calculate and graphic ability but with
extreme low power consumption. This feature is especially suitable
for Video, Automation controller, Multimedia application.
Besides the excellent CPU performance, PCM-8150 also provides
multiple display functions, it allows user to display different content
on CRT/LCD, CRT/TV, CRT/DVI, LCD/TV and LCD/DVI. This
feature opens a shortcut to dual view and simultaneous display
demanders. PCM-8150 does really the most power efficiency board
that you can find at this moment.
PCM-8150 provides interface capabilities of one channel ATA
controller supports two ATAPI devices; USB 2.0 host controller
support up to 4 USB ports; eight sets digital I/O and Watchdog
Timer support. In addition, the excellent 48/24/18-bit LVDS

Compact Board PCM-8150
Chapter 1 General Information 1 - 3
supports high quality LCD display resolution. Expansion Interfaces
include one mini-PCI, one PCI and two Type II PCMCIA ports.
And onboard Intel®82551 Ethernet controller stands for
10/100Mbps transferring speed.
The PCM-8150 is the ideal choice for high performance and energy
saving demands that implement with low power consumption and
pleasant multimedia presentations. For environment-friendly
applications, The PCM-8150 no doubt is a perfect fit.

Compact Board PCM-8150
Chapter 1 General Information 1-4
1.2 Features
• Supports Intel®Pentium®M / Celeron®M or onboard
ULV Intel®Celeron®Processor at 600MHz
• Supports 48-bit dual channel LVDS TFT Panel
• Supports one DDR266 memory slot up to 1GB
• 6 channels AC97 2.0 Codec with S/P DIF function
• Supports Mini-PCI socket, PCMCIA slots
• 4 COM / 4 USB2.0 / TV-out / DVI / Digital I/O

Compact Board PCM-8150
Chapter 1 General Information 1 - 5
1.3 Specifications
System
• CPU: Onboard ULV Intel®Celeron®
Processor at 600MHz or Socket
478 Intel®Pentium®M /
Celeron®M Processor up to
1.8GHz
 Memory: DDR DIMM x 1, support
DDR266 up to 1GB
 Chipset: Intel®852GM + 82801DB(ICH4)
 I/O Chipset: ITE IT8712F
 Ethernet: Intel®82551, 10/100Base-TX
RJ-45 connector
 BIOS: AWARD512KB FLASH ROM
 Watchdog Timer: Generates a Time-out System
Reset
 H/W Status Monitor: Supports Power Supply
Voltages and Temperatures
Monitoring
 SSD: Type II CompactFlash™ slot x 1
 Expansion Interface: Type III Mini-PCI Socket x 1;
PCI slot x1, Type II PCMCIA x 2
(optional)

Compact Board PCM-8150
Chapter 1 General Information 1-6
Display
 Chipset: Intel®852GM + Chrontel 7009
 Memory size: Shared System Memory Up to
64MB with DVMT
 Resolutions: Up to 1280 x 1024 @ 32bpp
Colors for CRT;
Up to 1280 x 1024 @ 24bpp
Colors for LCD
 TV-out: Supports NTSC and PAL
standard; Supports CRT/LCD,
CRT/TV, CRT/DVI, LCD/DVI
and LCD/TV Simultaneous
Display
I/O
 MIO: EIDE x 1(UDMA100x 1), FDD x
1, KB + Mouse x 1, RS-232 x 3,
RS-232/422/485 x 1, Parallel x 1
 IrDA: IrDA Tx/Rx header x 1
 Audio: MIC-in, Line-in, Line-out /
Speaker-out, 5.1 Output
 USB: USB 2.0 ports x 4
 Digital I/O Supports Digital I/O (8 in and
8 out, 16 in or 16 out)

Compact Board PCM-8150
Chapter 1 General Information 1 - 7
Mechanical and Environment
 Dimension: 8”(L) x 5.75”(W)
(203mmx146mm)
 Weight: 1.2lb (0.5kg)
 Operation Temp: 32°F~140°F (0°C~60°C)
 Battery: Lithium battery
 Power Supply Voltage: +5V. AT/ATX

Compact Board PCM-8150
Chapter 2 Quick Installation Guide 2-1
Quick
Installation
Chapter
2
Guide
Notice:
The Quick Installation Guide is derive
d
f
rom Chapter 2 of user manual. For othe
r
chapters and further installation
instructions, please refer to the use
r
manual CD-ROM that came with th
e
p
roduct.
Part No. 2007815011 Printed in Taiwan JAN. 2006

Compact Board PCM-8150
Chapter 2 Quick Installation Guide 2-2
2.1 Safety Precautions
Always completely disconnect the power cord
from your board whenever you are working on
it. Do not make connections while the power is
on, because a sudden rush of power can
damage sensitive electronic components.
Always ground yourself to remove any static
charge before touching the board. Modern
electronic devices are very sensitive to static
electric charges. Use a grounding wrist strap at
all times. Place all electronic components on a
static-dissipative surface or in a static-shielded
bag when they are not in the chassis

Compact Board PCM-8150
Chapter 2 Quick Installation Guide 2 - 3
2.2 Location of Connectors and Jumpers
Component Side
PCI1
DIMM1
CN1
CN7
VGA1
CN2
LAN1
JP2
JP1
CN5
CN4 CN6
JP3
CN8
CN10
JP4
JP5
CN9
USB1
LPT1
FDD1
USB2
MPCI1
CN16
CN18 CN15
CN14
CN13
CN12
IDE1
CN19
CN17
JP6
BT2
CN11
Type I: Socket 478 CPU

Compact Board PCM-8150
Chapter 2 Quick Installation Guide 2-4
PCI1
DIMM1
CN1
CN7
VGA1
CN2
LAN1
JP2
JP1
CN5
CN4 CN6
JP3
CN8
CN10
JP4
JP5
CN9
USB1
LPT1
FDD1
USB2
MPCI1
CN16
CN18 CN15
CN14
CN13
CN12
IDE1
CN19
CN17
JP6
BT2
CN11
The Height of Cooling System Depends on Customer Cooling Device.
NOTE:
Type II: Onboard CPU

Compact Board PCM-8150
Chapter 2 Quick Installation Guide 2 - 5
SolderSide
A1
PCMCI1
CFD1

Compact Board PCM-8150
Chapter 2 Quick Installation Guide 2-6
2.3 Mechanical Drawing
Component Side
0.00
0.00
5.08
5.08
99.82
5.08
135.89
0.00 32.39
46.47
67.06
77.61
144.00 113.67 148.59 174.72 185.07
135.89
193.04 198.12
140.97
115.29
138.43
126.73
137.54
136.51
126.99
127.64 133.91
159.39
137.53
128.64
97.16
91.44
96.52
171.45
178.44
76.01
57.15
53.15
181.98181.98
193.04
19.75
14.67
6.35
3.81
0.00
193.04
5.08
198.12 192.77 190.50 184.79 181.98 172.53 154.75 136.97
128.91
103.82
9.16
95.50
2.03
1.27
5.72
2.54
3.18
75.57
91.44
40.64
40.64
1.27
15.56
0.00
192.77
119.38
119.19