Aaeon PCM-QM77 User manual

Compact Board PCM-QM77
PCM-QM77
Intel®3rd Generation
CoreTM i7/ i5/ i3/ Celeron® Processor
Intel®QM77/HM76 Chipset
10/100/1000Base-TX LANs
4 USB 3.0, 4 USB2.0, 10 COM
16-bit Digital I/O
2 SATA 6.0Gb/s (Optional RAID)
1 CFast, 1 Mini Card, LPC
PCM-QM77 Manual 2nd Ed.
December 22, 2014

Compact Board PCM-QM77
Copyright Notice
This document is copyrighted, 2013. All rights are reserved. The
original manufacturer reserves the right to make improvements to
the products described in this manual at any time without notice.
No part of this manual may be reproduced, copied, translated, or
transmitted in any form or by any means without the prior written
permission of the original manufacturer. Information provided in this
manual is intended to be accurate and reliable. However, the
original manufacturer assumes no responsibility for its use, or for
any infringements upon the rights of third parties that may result
from its use.
The material in this document is for product information only and is
subject to change without notice. While reasonable efforts have
been made in the preparation of this document to assure its
accuracy, AAEON assumes no liabilities resulting from errors or
omissions in this document, or from the use of the information
contained herein.
AAEON reserves the right to make changes in the product design
without notice to its users.
i

Compact Board PCM-QM77
Acknowledgments
All other products’ name or trademarks are properties of their
respective owners.
AMI is a trademark of American Megatrends Inc.
CFast™is a trademark of the Compact Flash Association.
Intel®and Core™are trademarks of Intel®Corporation.
Microsoft Windows®is a registered trademark of Microsoft
Corp.
ITE is a trademark of Integrated Technology Express, Inc.
IBM, PC/AT, PS/2, and VGA are trademarks of International
Business Machines Corporation.
SoundBlaster is a trademark of Creative Labs, Inc.
Please be notified that all other products’ name or trademarks
not be mentioned above are properties of their respective
owners.
ii

Compact Board PCM-QM77
Packing List
Before you begin installing your card, please make sure that
the following materials have been shipped:
1 17592QM772 Cooler
1 DVD-ROM for Manual (in PDF Format) and
Drivers
1 PCM-QM77
1 1702150155 SATA cable
1 1709070500 SATA Power cable
1 9657666600 Jumper Cap
If any of these items should be missing or damaged, please
contact your distributor or sales representative immediately.
iii

Compact Board PCM-QM77
Contents
Chapter 1 General Information
1.1 Introduction................................................................1-2
1.2 Features....................................................................1-3
1.3 Specifications............................................................1-4
Chapter 2 Quick Installation Guide
2.1 Safety Precautions ..................................................2-2
2.2 Location of Connectors and Jumpers .......................2-3
2.3 Mechanical Drawing..................................................2-5
2.4 List of Jumpers..........................................................2-7
2.5 List of Connectors .....................................................2-8
2.6 Setting Jumpers ......................................................2-11
2.7 LVDS Port 2 Operating VDD Selection (JP1).........2-12
2.8 LVDS Port 2 Backlight Inverter VCC Selection (JP1)
.......................................................................................2-12
2.9 LVDS Port 1 Backlight Lightness Control Mode
Selection (JP2)..............................................................2-12
2.10 LVDS Port 2 Backlight Lightness Control Mode
Selection (JP3)..............................................................2-13
2.11 LVDS Port 1 Operating VDD Selection (JP4).......2-13
2.12 LVDS Port 1 Backlight Inverter VCC Selection (JP4)
.......................................................................................2-14
2.13 COM6 Pin9 Function Selection (JP5) ...................2-14
2.14 COM2 Pin9 Function Selection (JP6) ...................2-15
iv

Compact Board PCM-QM77
2.15 AT/ATX Power Supply Mode Selection (JP8).......2-15
2.16 Front Panel Connector (JP9) ................................2-16
2.17 Clear ME Jumper (JP10).......................................2-16
2.18 Clear CMOS Jumper (JP10).................................2-17
2.19 Touch Screen 4/5-Wire Mode Selection (JP11)....2-17
2.20 DVI Connector (CN1)............................................2-17
2.21 Stereo Audio Output Connector (CN2) .................2-19
2.22 Ethernet#2 Connector (CN3) (Optional) ...............2-20
2.23 Ethernet#1 Connector (CN4) (Optional) ...............2-20
2.24 RJ-45 Ethernet#2 Connector (CN5)......................2-21
2.25 RJ-45 Ethernet#1 Connector (CN6)......................2-22
2.26 ATX Power Connector (CN7)................................2-23
2.27 LVDS Port 2 Inverter / Backlight Connector (CN8)2-24
2.28 LVDS Port 1 Inverter / Backlight Connector (CN9)2-25
2.29 Audio In/Out/CD-in and MIC Connector (CN10)...2-25
2.30 D-SUB CRT Connector (CN11) (Optional) ...........2-26
2.31 CRT Connector (CN12).........................................2-27
2.32 mSATA Slot (CN13)..............................................2-28
2.33 Ethernet#1 LED Indicator (CN14).........................2-31
2.34 COM Port 2 (CN15)...............................................2-32
2.35 COM Port 1 (CN16)...............................................2-34
2.36 Ethernet#2 LED Indicator (CN17).........................2-35
2.37 LVDS Port 2 (CN18)..............................................2-35
2.38 COM Port 4 (CN19)...............................................2-37
2.39 COM Port 3 (CN20)...............................................2-38
v

Compact Board PCM-QM77
2.40 LVDS Port 1 (CN21)..............................................2-39
2.41 LPC Port (CN22)...................................................2-41
2.42 COM Port 6 (CN23)...............................................2-42
2.36 COM Port 5 (CN24)...............................................2-44
2.37 PCI Slot (CN25).....................................................2-45
2.38 COM Port 8 (CN26)...............................................2-45
2.39 COM Port 7 (CN27)...............................................2-46
2.40 PCI-Express［x16］Slot (CN28)..........................2-46
2.41 DDR3 SO-DIMM Channel B Slot (CN29)..............2-46
2.42 DDR3 SO-DIMM Channel A Slot (CN30)..............2-46
2.43 COM Port 10 (CN31).............................................2-47
2.44 COM Port 9 (CN32)...............................................2-47
2.45 USB 3.0 Ports 1 and 2 (CN34)..............................2-48
2.46 USB 3.0 Ports 3 and 4 (CN35)..............................2-50
2.47 USB 2.0 Ports 5 and 6 (CN36)..............................2-51
2.48 USB 2.0 Ports 7 and 8 (CN37)..............................2-52
2.49 PS/2 Keyboard/Mouse Combo Port (CN38).........2-52
2.50 IrDA Connector (CN39) (Optional)........................2-53
2.51 SATA Port 2 Connector (CN40)............................2-54
2.52 SATA Port 1 Connector (CN41)............................2-54
2.53 +5V Output for SATA HDD (CN43).......................2-55
2.54 LPT Connector (CN44) .........................................2-55
2.55 System Fan Connector (CN45).............................2-57
2.56 Digital IO Port 1 Connector (CN46).......................2-57
2.57 Digital IO Port 2 Connector (CN47).......................2-58
vi

Compact Board PCM-QM77
2.58 Touch Screen Connector (CN48)..........................2-59
2.59 CPU FAN Connector (CN49)................................2-61
2.60 UIM Card Connector (CN50).................................2-61
2.61 Mini-Card Slot (CN51)...........................................2-62
2.62 CFast Slot (CN52).................................................2-65
Chapter 3 AMI BIOS Setup
3.1 System Test and Initialization. ..................................3-2
3.2 AMI BIOS Setup........................................................3-3
Chapter 4 Driver Installation
4.1 Installation……………………………………………..4-3
Appendix A Programming The Watchdog Timer
A.1 Programming .........................................................A-2
A.2 F81866 Watchdog Timer Initial Program...............A-5
Appendix B I/O Information
B.1 I/O Address Map....................................................B-2
B.2 Memory Address Map............................................B-3
B.3 IRQ Mapping Chart................................................B-4
B.4 DMA Channel Assignments.……………………….B-5
Appendix C Mating Connector
C.1 List of Mating Connectors and Cables.................. C-2
Appendix D RAID & AHCI Settings
D.1 Setting RAID......................................................... D-2
vii

Compact Board PCM-QM77
viii
D.2 Setting AHCI......................................................... D-8
Appendix E Electrical Specifications for I/O Ports
E.1 Electrical Specifications for I/O Ports.....................E-2
Appendix F Digital I/O
F.1 Digital I/O ...............................................................F-2

Compact Board PCM-QM77
Chapter 1 General Information 1- 1
General
Chapter
1
Information

Compact Board PCM-QM77
Chapter 1 General Information 1-2
1.1 Introduction
The PCM-QM77 supports Intel®3rd Generation Intel®Core™
i7/i5/i3/Celeron®processor which when paired with the Intel®
QM77/HM76 chipset offers a high performance computing
platform with low power consumption. This new product
supports two DDR3/L SODIMMs at speed of 1333/1600 MHz,
up to 16 GB. One CFast™ and two SATA 6.0Gb/s (Optional
RAID) interfaces provide ample storages. With dual Gigabit
Ethernet, ten COM ports, four USB3.0 and four USB2.0, the
PCM-QM77 meets the requirements of today’s demanding
applications.
Display requirements are met with an abundance of interfaces
such as VGA, DVI, and LVDS. The graphic engine adopts 3rd
generation Intel®QM77/HM76 to offer high definition display
function. In addition, it supports up to two 24-bit Dual-Channel
LVDS, and one DVI.
With all of its integrated features, the PCM-QM77 strikes a
balance of performance and price. This versatile product targets
Industrial Automation, Entertainment, Networking, KIOSK/POS,
Transportation, Banking, Healthcare and Digital Signage
applications that require high performance and high reliability.

Compact Board PCM-QM77
Chapter 1 General Information 1-3
1.2 Features
Intel®3rd Generation Intel®Core™ i7/i5/i3/Celeron®
processor
Intel®QM77/HM76
204-pin DDR3 SODIMM x 2, DDR3/L 1333/1600, up
to 16GB
Gigabit Ethernet x 2
VGA, DVI, Dual LVDS LCD by CH7511
2CH Audio
SATA 6.0Gb/s x 2 (Optional RAID), CFast™x 1,
mSATA x 1
USB3.0 x 4, USB2.0 x 4, COM x 10, 16-bit Digital
I/O
PCI Express [x16] x1, PCI x 1, Mini Card x1,
mSATA x1
Power support AT/ATX
Supports TPM (Optional), supports Touch 4/5 Wire
(Optional)
Supports iAMT with Intel®Ethernet PHY 82579LM &
Intel®QM77 PCH
Design for ErP 2.0 Standard
Backlight control (PWN/Voltage) by Jumper and
default setting is PWN; Backlight present control by
BIOS

Compact Board PCM-QM77
Chapter 1 General Information 1-4
1.3 Specifications
System
From Factor 5.25” Compact Board (203 mm x
146 mm)
Processor Intel®3rd Generation Intel®Core™
i7/i5/i3/Celeron®processor
System Memory 204-pin DDR3 SODIMM x 2,
DDR3/L 1333/1600, up to 16GB
Chipset Intel®QM77/HM76
Ethernet Intel 82579LM Gigabit PHY x1 &
Intel 82583V Gigabit x 1, RJ-45 x
2 co-lay with pin header Intel
82583V co-lay with Intel 82574L
Support IEEE1588
BIOS Plug & Play BIOS – 16MB flash
Wake On LAN Yes
Watchdog Timer Generates a time-out system
reset
H/W Status
Monitoring Supports power supply voltages
and temperature monitoring
Expansion Interface Mini Card x1, mSATAx1, PCI x1
and PCI Express [x16] x1
Battery Lithium Battery
Power Requirement ATX/AT AT mode to control by
jumper, and BIOS need to be set
ACPI disabled
Board Size 8”(L) x5.75” (W) (203mm x
146mm)
Gross Weight 0.88 lb (0.4Kg)

Compact Board PCM-QM77
Chapter 1 General Information 1-5
Operating
Temperature 32°F~140°F (0°C~60°C)
Storage Temperature -40°F~176°F (-40°C~80°C)
Operating Humidity 0% ~ 90% relative humidity,
non-condensing
Display: Supports CRT/LCD, DVI/LCD simultaneous / dual
view displays
Chipset Intel®QM77/HM76 integrated
Memory Shared system memory up to
512MB
Resolution up to 2048 x 1536 for VGA
Up to 1920 x 1200 for LVDS LCD,
DVI
DVI DVI-I x 1
I/O: Fintek 81866
Storage SATA 6.0Gb/s x 2 , CFast™ x 1,
mSATA x 1
Serial Port 10 COM ports:
- Six 5x2 box header on internal
(COM1~6) from Fintek 81866
- COM2/6: RS-232/422/RS485
- Four 5x2 box header on
internal(COM7~10)
- COM 7 ~10: RS-232 from
F81216D(Optional)
USB USB3.0 x 4, USB2.0 x 4
PS/2 Port Keyboard x 1, Mouse x 1

Compact Board PCM-QM77
Chapter 1 General Information 1-6
Digital I/O 16-bit Programmable
Audio Line-in, Line-out, Mic-in

Compact Board PCM-QM77
Chapter2QuickInstallationGuide2-1
Quick
Installation
Guide
Chapter
2

Compact Board PCM-QM77
Chapter 2 Quick Installation Guide 2-2
2.1 Safety Precautions
Always completely disconnect the power cord
from your board whenever you are working on
it. Do not make connections while the power is
on, because a sudden rush of power can
damage sensitive electronic components.
Always ground yourself to remove any static
charge before touching the board. Modern
electronic devices are very sensitive to static
electric charges. Use a grounding wrist strap at
all times. Place all electronic components on a
static-dissipative surface or in a static-shielded
bag when they are not in the chassis

Compact Board PCM-QM77
Chapter2QuickInstallationGuide2-3
2.2 Location of Connectors and Jumpers
Component Side

Compact Board PCM-QM77
Chapter 2 Quick Installation Guide 2-4
Solder Side

Compact Board PCM-QM77
Chapter2QuickInstallationGuide2-5
2.3 Mechanical Drawing
Component Side