Aaeon PFM-CVS User manual

PC/104 Module PFM-CVS
PFM-CVS
Intel®Atom™ N2600 Processor
DDR3 1066 SODIMM
18-bit Single Channel LVDS LCD
4 USB2.0, 4 COM, 1 SATA, 1 mSATA
1 Gigabit Ethernet, PC/104+
Mini Card (Optional)
PFM-CVS Manual Rev. A 2nd Ed.
December 2012

PC/104 Module PFM-CVS
i
Copyright Notice
This document is copyrighted, 2012. All rights are reserved. The
original manufacturer reserves the right to make improvements to the
products described in this manual at any time without notice.
No part of this manual may be reproduced, copied, translated, or
transmitted in any form or by any means without the prior written
permission of the original manufacturer. Information provided in this
manual is intended to be accurate and reliable. However, the original
manufacturer assumes no responsibility for its use, or for any in-
fringements upon the rights of third parties that may result from its
use.
The material in this document is for product information only and is
subject to change without notice. While reasonable efforts have been
made in the preparation of this document to assure its accuracy,
AAEON assumes no liabilities resulting from errors or omissions in
this document, or from the use of the information contained herein.
AAEON reserves the right to make changes in the product design
without notice to its users.

PC/104 Module PFM-CVS
ii
Acknowledgments
All other products’ name or trademarks are properties of their
respective owners.
Intel®and Atomare trademarks of Intel®Corporation.
Microsoft Windows®is a registered trademark of Microsoft Corp.
ITE is a trademark of Integrated Technology Express, Inc.
IBM, PC/AT, PS/2, and VGA are trademarks of International
Business Machines Corporation.
All other product names or trademarks are properties of their
respective owners.

PC/104 Module PFM-CVS
iii
Packing List
Before you begin installing your card, please make sure that the
following materials have been shipped:
Jumper Cap
Product CD
PFM-CVS with Heatsink
If any of these items are missing or damaged, please contact your
distributor or sales representative immediately.

PC/104 Module PFM-CVS
iv
Contents
Chapter 1 General Information
1.1 Introduction................................................................... 1-2
1.2 Features....................................................................... 1-3
1.3 Specifications............................................................... 1-4
Chapter 2 Quick Installation Guide
2.1 Safety Precautions....................................................... 2-2
2.2 Location of Connectors and Jumpers .......................... 2-3
2.3 Mechanical Drawing..................................................... 2-5
2.4 List of Jumpers............................................................. 2-7
2.5 List of Connectors ........................................................ 2-8
2.6 Setting Jumpers ......................................................... 2-10
2.7 LVDS Voltage Selection (JP2)................................... 2-11
2.8 AT/ATX Selection and LVDS Backlight Control Voltage
Selection (JP3)................................................................. 2-11
2.9 COM2 +5V/Ring/+12V Selection (JP6)...................... 2-12
2.10 PCI-104 VIO Voltage Selection (JP7)...................... 2-12
2.11 Clear CMOS (JP8) ................................................... 2-12
2.12 PC/104 -5V/-12V Voltage Selection (JP11) Reserved
.......................................................................................... 2-13
2.13 Backlight Brightness Control Connector (CN2)........ 2-13
2.14 Internal LVDS Connector (CN3)............................... 2-14
2.15 SATA Power Connector (CN5) ................................ 2-15

PC/104 Module PFM-CVS
v
2.16 PCI-104 Connector (CN6)........................................ 2-15
2.17 Front Panel Connector (CN7) .................................. 2-15
2.18 +12VSB Power Input Connector (CN9) ................... 2-16
2.19 PC/104/ ISA Connector (CN11)............................... 2-16
2.20 Digital I/O Connector (CN12)................................... 2-17
2.21 Mini PCI Express/mSATA Connector (CN14) (Optional)
.......................................................................................... 2-17
2.22 Battery Connector (BT1).......................................... 2-22
2.23 SATA Connector (SATA1) ....................................... 2-23
2.24 CRT Connector (VGA1)........................................... 2-23
2.25 COM1 RS-232 Connector (COM1).......................... 2-24
2.26 COM2 RS-232/422/485 Connector (COM2)............ 2-25
2.27 COM3 RS-232 Connector (COM3).......................... 2-26
2.28 COM4 RS-232 Connector (COM4).......................... 2-27
2.29 USB2.0 Connector (USB1) ...................................... 2-28
2.30 USB2.0 Connector (USB2) ...................................... 2-28
2.31 USB2.0 Connector (USB3) ...................................... 2-29
2.32 USB2.0 Connector (USB4) ...................................... 2-29
2.33 FAN Connector (FAN1) Reserved ........................... 2-30
2.34 LAN Connector (LAN1) ............................................ 2-30
2.35 DDR3 SODIMM Connector (DIMM1)....................... 2-31
Chapter 3 AMI BIOS Setup
3.1 System Test and Initialization. ..................................... 3-2
3.2 AMI BIOS Setup........................................................... 3-3

PC/104 Module PFM-CVS
vi
Chapter 4 Driver Installation
4.1 Installation.................................................................... 4-3
Appendix A Programming The Watchdog Timer
A.1 Programming ............................................................A-2
A.2 F81866 Watchdog Timer Initial Program……………A-5
Appendix B I/O Information
B.1 I/O Address Map.......................................................B-2
B.2 1st MB Memory Address Map ...................................B-4
B.3 IRQ Mapping Chart...................................................B-5
B.4 DMA Channel Assignments......................................B-7
Appendix C Mating Connector
C.1 List of Mating Connectors and Cables......................C-2
Appendix D Electrical Specifications for I/O Ports
D.1 Electrical Specifications for I/O Ports .......................D-2
D.2 DIO Programming.....................................................D-3
D.3 Digital I/O Register....................................................D-4
D.4 Digital I/O Sample Program......................................D-6

PC/104 Module PFM-CVS
Chapter 1 General Information 1- 1
General
Chapter
1
Information

PC/104 Module PFM-CVS
1.1 Introduction
AAEON Technology, a leading company in embedded boards
manufacturing with a full range of PC/104 Modules, launches a brand
new PC/104 CPU Module-PFM-CVS. Its compact size and rich
functionality ensures the most cost effective and compatible module to
coincide with your existing system planning devices.
PFM-CVS adopts an Intel®Atom N2600 Dual Core 1.6 GHz Processor
with the latest Intel technology. Although PFM-CVS is a small board,
it offers the full functions for customers demand. The chipset of
PFM-CVS deploys Intel®Atom™N2600 and NM10 that make this
board achieve high performance. It features one
10/100/1000Base-TX Ethernet port, four USB 2.0 ports, four COM
ports. In addition, the PFM-CVS equips PC/104+ socket and
Half-size mSATA/ Mini Card (optional) for flexible expansions.
Chapter 1 General Information 1- 2

PC/104 Module PFM-CVS
1.2 Features
Fanless Intel®Atom™ N2600 Dual Core 1.6 GHz
Processor
Intel®Atom™ N2600 + NM10
204-pin DDR3 1066 MHz SODIMM x 1, Max. 2 GB
10/100/1000Base-TX Ethernet x 1
CRT, 18-bit Single Channel LVDS LCD
SATA 3.0 Gb/s x 1
USB2.0 x 4, COM x 4
PC/104+ Standard Form Factor Legacy ISA Support. (w/IO
Mode), mSATA / Mini Card (Optional) (Half Size support)
+12V Only Operation
Chapter 1 General Information 1 - 3

PC/104 Module PFM-CVS
1.3 Specifications
System
Form Factor PC/104
Processor Intel®Atom™ N2600 1.6 GHz
processor
System Memory DDR3 1066 MHz SODIMM x 1,
Max. 2 GB
Chipset Intel
®Atom™ N2600+ NM10
I/O Chipset Fintech F81866D
Ethernet Realtek RTL8111E for
10/100/1000Base-TX, RJ-45 x 1
BIOS AMI BIOS – 32MB ROM
Wake on LAN Yes
Watchdog Timer Generates a time-out system
reset
H/W Status Monitoring Supports power supply voltage
and temperature monitoring
Expansion Interface PC/104+, mSATA/ Mini Card(for
Half-size)
Power Requirement +12V, AT (Default) /ATX
Battery Lithium battery
Board Size 3.55” x 3.77” (90mm x 96mm)
Gross Weight 0.35 lb (0.16 Kg)
Chapter 1 General Information 1- 4

PC/104 Module PFM-CVS
Operating Temperature 32ºF ~ 140ºF (0ºC ~ 60ºC);
-4ºF ~ 158ºF (-20ºC ~ 70ºC) for
WiTAS1
Storage Temperature -40ºF ~ 176ºF (-40ºC ~ 80ºC)
Operating Humidity 0%~90% relative humidity,
non-condensing
Display: Supports CRT/LCD simultaneous/ dual view displays
Chipset Intel®Atom™ N2600 processor
integrated
Resolutions Up to 1920x1200 for CRT;
Up to 1366x768 for LVDS
LCD Interface 18-bit Single Channel LVDS
I/O
Storage SATA 3.0 Gb/s x 1, mSATA x 1
Serial Port RS-232 x 3,
RS-232/422/485 x 1
Universal Serial Bus USB 2.0 x 4
Digital I/O 8-bit Digital I/O (Programmable)
Chapter 1 General Information 1 - 5

PC/104 Module PFM-CVS
Chapter 1 General Information 1- 6
Limitation Notice on ISAInterface Support
According to the information from Intel for Atom™ Processor design,
Intel®Atom™ Processor D2000 and N2000 Series do NOT support
ISA expansion area (C_0000h-D_FFFFh). This area always maps to
system DRAM. The illustration is as below for reference.
Document source: Intel®Atom™ Processor D2000 and N2000 Series
page 34 mentions that is External Design Specification – Volume 2 of 2.
(449931_449931_CDV_EDS_Vol2_Rev1p6)

PC/104 Module PFM-CVS
Chapter2QuickInstallationGuide2-1
Quick
Installation
Chapter
2
Guide

PC/104 Module PFM-CVS
Chapter 2 Quick Installation Guide 2-2
2.1 Safety Precautions
Always completely disconnect the power cord
from your board whenever you are working on
it. Do not make connections while the power is
on, because a sudden rush of power can
damage sensitive electronic components.
Always ground yourself to remove any static
charge before touching the board. Modern
electronic devices are very sensitive to static
electric charges. Use a grounding wrist strap at
all times. Place all electronic components on a
static-dissipative surface or in a static-shielded
bag when they are not in the chassis

PC/104 Module PFM-CVS
Chapter2QuickInstallationGuide2-3
2.2 Location of Connectors and Jumpers
Component Side

PC/104 Module PFM-CVS
Solder Side
Chapter 2 Quick Installation Guide 2-4

PC/104 Module PFM-CVS
Chapter2QuickInstallationGuide2-5
2.3 Mechanical Drawing
Component Side

PC/104 Module PFM-CVS
Chapter 2 Quick Installation Guide 2-6
Solder Side

PC/104 Module PFM-CVS
Chapter2QuickInstallationGuide2-7
2.4 List of Jumpers
The board has a number of jumpers that allow you to configure your
system to suit your application.
The table below shows the function of each of the board's jumpers:
Label Function
JP2 LVDS Voltage Selection
JP3 AT/ATX Selection and LVDS Backlight Control
Voltage Selection
JP6 COM2 +5V/Ring/+12V Selection
JP7 PCI104 VIO Voltage Selection
JP8 Clear CMOS
JP11 PC104 -5V/-12V Voltage Selection(Reserved)