A&D TM-2440 User manual

AINSTALLATION
1. Visit https://www.aandd-ps.com/inquiry/abpm_software
to register your device
and download the latest
software version. After
the download, please
unzip the folder. Or insert
the disc to install the
software and follow the
installation instructions.
BCONNECTING THE MONITOR
1. Connect the micro USB cable between the monitor and
computer.
2. The buzzer will sound and the following symbol appears
on the OLED display.
3. The monitor enters its standby mode.
4. If using the TM-2441, ensure the
switch on the side is “On” and lock it.
OFF
---0
Standby mode
TM-2440/41
Quick Start Guide
ENG
TM-2440 TM-2441

CPROGRAMMING THE MONITOR
1. Open the A&D software
2. Click on “Recorder”.
3. Select Protocol,
Referring Physician,
etc. and click OK.
The device is now
programmed.
4. Disconnect the PC
interface cable from
the device.
Note: We recommend
connecting your monitor to
your PC before opening
the A&D software.
PATIENT TIPS
DO’S
1. When ination begin, relax arm, stay still and quiet.
2. Ensure the tube is not compressed or kinked.
DO NOT
1. Operate heavy machinery. Vibrations may disrupt measurements.
2. Remove batteries during session.
3. Drop or shock the device.
4. Expose the device to rain or water.
5. Arrange the cuff hose around your neck during sleep.

DSETTING UP THE PATIENT
1. Wrap the cuff around the patients’ upper arm (choose
the correct cuff size)
0.5” (1-2cm)
Have room to
insert two fingers
2. Position tube around neck and attach monitor to the
belt loop.
Air hose Tape
Clip
Cuff
Air plug
Air socket
Belt
Carrying holder
3. Press the start button to take rst measurement. The
pre-set parameters will automatically begin.

EDOWNLOADING THE DATA
1. Open the micro USB terminal on the monitor and
connect the USB cable.
2. Open the A&D Ambulatory Analysis Software from your
computer.
Note: The device needs to be plugged in before opening the software.
3. Click the “Download” icon.
4. After the download is complete, enter the patient
information. Please input patient sleep time.
5. Click on “Views” tab.
TM-2440 TM-2441

6. Click on the “Layout” icon.
7. Choose your report settings, then
apply and save.
8. Click on the “Print” icon to print results.
Note: To create a PDF of report, choose “Adobe PDF” as printer.
CUFF GUIDE
Cuff Size
Small Cuff 5.9-8.7” (15-22cm)
Medium Cuff 7.8-12.2” (20-31cm)
Large Cuff 11.0-15.0” (28-38cm)
Extra Large Cuff 14.2-19.7” (36-50cm)
andmedical.com
©2020 A&D Medical. All rights reserved. TM2440/41-QSC