ABB i-bus KNX User manual

ABB i-bus®KNX
DALI
-Gateway Basic DG/S x.64.1.1
Product Manual

ABB i-bus®KNX
Contents
DG/S x.64.1.1 | 2CDC507164D0201 i
Contents
Page
1General ................................................................................................. 3
1.1 Using the product manual............................................................................................................ 4
1.1.1 Structure of the product manual .................................................................................................. 4
1.1.2 Notes........................................................................................................................................... 5
1.2 Product and functional overview.................................................................................................. 6
1.2.1 Emergency lighting tests.............................................................................................................. 8
1.3 General information on DALI and standards...............................................................................10
1.4 Comparison of ABB i-bus®DALI gateways.................................................................................11
2Device technology............................................................................. 12
2.1 Technical data............................................................................................................................13
2.2 Connection diagram ...................................................................................................................15
2.3 Dimension drawing.....................................................................................................................16
2.4 Mounting and installation............................................................................................................17
2.5 Description of inputs and outputs ...............................................................................................19
2.6 Manual operation........................................................................................................................20
2.6.1 Display elements........................................................................................................................22
3Commissioning.................................................................................. 23
3.1 Overview.....................................................................................................................................24
3.2 Parameters.................................................................................................................................27
3.2.1 General parameter window.........................................................................................................28
3.2.2 DALI output X parameter window...............................................................................................35
3.2.2.1 X DALI configuration parameter window ....................................................................................35
3.2.3 X Output parameter window.......................................................................................................40
3.2.3.1 X Output: State parameter window.............................................................................................52
3.2.3.2 X Output: Fault parameter window.............................................................................................57
3.2.3.3 X Output: Functions (Turn off brightness/Burn-in/Slave offset/Partial failure)
parameter window......................................................................................................................67
3.2.4 X template group x/ballast x parameter window.........................................................................77
3.2.4.1 X Status template (group x/ballast x) parameter window............................................................90
3.2.4.2 X Fault template (group x/ballast x) parameter window..............................................................95
3.2.4.3 X Functions template (group x/ballast x) (Forced operation/Block/Burn-in/Partial failure)
parameter window....................................................................................................................102
3.2.4.4 X Slave template (group x/ballast x) parameter window...........................................................112
3.2.4.5 X Staircase lighting template (group x/ballast x) parameter window.........................................122
3.2.5 X groups or X ballasts parameter window................................................................................134
3.2.5.1 X groups/Group x or X ballasts/Ballast x / status parameter window........................................139
3.2.5.2 X groups/Group x or X ballasts/Ballast x / fault parameter window ..........................................140
3.2.5.3 X groups/Group x or X ballasts//ballast x / functions (Forced operation/Block/Burn-in/
Partial failure) parameter window.............................................................................................142
3.2.5.4 X groups/Group x or X ballasts/Ballast x / slave parameter window.........................................144
3.2.5.5 X groups/Group x or X ballasts/Ballast x / staircase lighting parameter window.......................147
3.2.6 X lighting converter parameter window.....................................................................................149
3.2.6.1 X lighting converter/Emergency light template parameter window ...........................................155
3.2.6.2 X lighting converter/Emergency light x parameter window.......................................................165
3.2.7 X scenes parameter window.....................................................................................................166
3.2.7.1 X scenes/Scene x parameter window.......................................................................................168
3.3 Group objects...........................................................................................................................171
3.3.1 Summary of group objects........................................................................................................172
3.3.2 Group objects General .............................................................................................................175
3.3.3 Output A group objects.............................................................................................................177
3.3.4 Group x/Ballast x group objects................................................................................................199
3.3.5 Lighting converter x group objects............................................................................................208

ABB i-bus®KNX
Contents
ii 2CDC507164D0201 | DG/S x.64.1.1
4Planning and application.................................................................213
4.1 DALI addressing...................................................................................................................... 213
4.2 Lamp and ballast monitoring.................................................................................................... 214
4.3 Exchange of DALI devices....................................................................................................... 215
4.4 Function circuit diagrams and priorities.................................................................................... 216
4.5 DALI dimming curve................................................................................................................. 219
4.5.1 DALI (logarithmic) curve .......................................................................................................... 219
4.5.2 KNX (linear) curve ................................................................................................................... 221
4.6 Time sequences in the gateway .............................................................................................. 223
4.6.1 DALI fade times....................................................................................................................... 223
4.6.2 Timed progression of the staircase lighting function................................................................ 224
AAppendix...........................................................................................227
A.1 8-bit scene code table (group object 33).................................................................................. 227
A.2 Fault addressed "Request" (no. 21) code table ....................................................................... 229
A.3 Fault addressed "Feedback" (no. 21) code table..................................................................... 230
A.4 Scope of delivery..................................................................................................................... 232
A.5 Ordering details ....................................................................................................................... 233
A.6 Notes ....................................................................................................................................... 234

ABB i-bus®KNX
General
DG/S x.64.1.1 | 2CDC507164D0201 3
1 General
This manual provides detailed technical information concerning the ABB i-bus®KNX DALI Gateway Basic.
These are DALI gateways which have identical functions but a different number of DALI outputs. They can
be used to control a variety of DALI lamps individually or in groups on a DALI output via KNX. Lots of small
groups in individual offices as well as large lights for area lighting can be combined in a gateway as
required. The installation, programming, commissioning and use of the device are described using
examples.
The DALI gateways are used to control DALI equipment such as ballasts, transformers or LED converters
with device type 0 DALI interfaces to EN 62386, via KNX. DALI self-contained emergency lights with
individual batteries (device type 1) to EN 62386 (Part 202) can also be integrated.
The DALI gateways themselves provide no functionality in terms of the emergency lighting regulations,
e.g. logging functions or other associated stipulated functions. They serve as an intelligent mediator
between KNX and DALI.
Using group objects, the various mandatory emergency lighting tests, e.g. function or duration tests, can
be triggered via KNX and the results provided in the same way. This information can then be used for
higher-level management of the emergency lighting, which triggers at prescribed times and captures,
saves or logs the result provided via KNX on the gateway.
The DALI gateways combine both the internationally standardized and open standards in the DALI
standard (EN 62386) and the KNX home and building electronic systems standards (ISO/IEC 14543-3 and
EN 50090).
The two DALI outputs on the DG/S 2.64.1.1 can control up to 2 x 64 DALI devices individually or in up
to 2 x 16 DALI groups. It is possible to mix individual and group control on the outputs. If necessary, all the
devices can be controlled together in broadcast or in up to 2 x 16 light scenes. Controls can be configured
in any way on the DALI output, which makes the gateway highly versatile.

ABB i-bus®KNX
General
42CDC507164D0201 | DG/S x.64.1.1
1.1 Using the product manual
This manual provides detailed technical information concerning the ABB i-bus®DALI Gateways Basic and
their installation and programming.
Device application is explained using examples.
This manual is divided into the following chapters:
Chapter 1 General
Chapter 2 Device technology
Section 3 Commissioning
Section 4 Planning and application
Chapter A Appendix
1.1.1 Structure of the product manual
All parameters are described in section 3.
Note
Both versions of the DALI Gateway Basic are described in this manual. As the functions for all DALI
outputs are identical, the explanations cover one output only.

ABB i-bus®KNX
General
DG/S x.64.1.1 | 2CDC507164D0201 5
1.1.2 Notes
Notes and safety instructions are represented as follows in this manual:
Note
Tips for usage and operation
Examples
Application examples, installation examples, programming examples
Important
These safety instructions are used as soon as there is danger of a malfunction without risk of damage
or injury.
Attention
These safety instructions are used as soon as there is danger of a malfunction without risk of damage
or injury.
Danger
These safety instructions are used if there is a danger to life and limb with inappropriate use.
Danger
These safety instructions are used if there is an extreme danger to life with inappropriate use.

ABB i-bus®KNX
General
62CDC507164D0201 | DG/S x.64.1.1
1.2 Product and functional overview
The KNX DALI Gateway Basic DG/S 1.64.1.1 and DG/S 2.64.1.1 are modular installation devices in
Pro Mdesign. They are DALI Single-Master Controllers to DALI standard EN 62386 ed/1 and ed/2. A DALI
gateway provides the interface between the KNX installation and the DALI lighting control.
The difference between the two DALI gateways is their number of DALI outputs. Both outputs are the
same and have identical functions and properties. Up to 64 DALI devices can be connected to each
output. These 64 devices can be controlled in broadcast, individually or in a DALI group. Individual and
group control can be combined on the same output. Each device or group can be independently switched,
dimmed and assigned a brightness value via the KNX. The gateways have group objects which can be
programmed to signal lamp, ballast or combined lamp/ballast faults on the KNX. The fault status of an
individual device can also be signaled or queried via coded group objects. The gateways also have a
Scene function (16 per output), a Staircase Lighting function, and Slave, Block and Forced operation
functions.
The gateways support type 0 and type 1 DALI devices (self-contained emergency lights) to EN 62386.
A self-contained emergency light, or more precisely, a type 1 emergency lighting converter, is a DALI
device which monitors and tests the state of the individual battery on an emergency lighting device and
provides the information via standardized DALI telegrams to EN 62386-202. The DALI gateways evaluate
this information and send it on the KNX.
The basic DALI gateways do not support overlapping DALI groups, i.e. a device can only be assigned to
one group. If a device is controlled individually, it cannot be controlled via DALI groups as well. KNX
addressing can be used to set up a mix of individual DALI devices and DALI groups. It is also possible to
jointly control all DALI devices connected to a DALI output using DALI output telegrams (DALI broadcast
control).
The basic DALI gateways are Single-Master DALI controllers, i.e. they dispense with the need to connect
another DALI master such as DALI sensors, presence detectors or DALI lighting controllers to the output.
These functions can be executed with KNX; the DALI gateway functions as a 64-fold or 2x64-fold
actuator/dimmer.
The DALI power supply for the 64 DALI devices on each output is integrated in the gateway.
DALI device readdressing and assignment to DALI groups is undertaken in ETS independent ABB i-
bus®Tool, so that for example, a facility manger without ETS knowledge is capable of exchanging and
reassigning DALI devices if maintenance is required. In addition, the error states of the individual DALI
devices (ballasts and emergency lighting converters) are represented graphically with the ABB i-busTool.
The tool can also be used for function checks during commissioning.
Parameter setting and group address allocation is undertaken with the Engineering Tool Software, ETS
versions 4.2.0, 5.5.3 or later.

ABB i-bus®KNX
General
DG/S x.64.1.1 | 2CDC507164D0201 7
The application program has a wide range of functions:
•Switching, dimming, brightness value setting
•Status signaling via common or separate group objects
•Status signaling for a lamp and/or ballast malfunction
•Programming of individual maximum brightness/minimal dimming values (dimming thresholds)
•Different dimming speeds for switching, brightness setting and dimming
•Reaction on DALI and KNX bus voltage failure and recovery
•Programming of the brightness value (Power-On Level) after a ballast supply voltage recovery
•KNX control of all connected DALI devices without prior commissioning (DALI group assignment)
•Triggering of emergency lighting tests via a DALI emergency lighting converter
•Function test
•Duration test
•Partial duration test
•Battery charge state
•Sending emergency lighting test results on the KNX
Various operating modes, e.g.:
•A Slave function which integrates the groups in an energy efficient lighting control configuration
•Light scenes which are recalled or saved via KNX
•A Staircase lighting function including advance warning
•A Block and Forced operation function
•A Partial failure function, so as to switch on other devices to compensate for brightness loss in the
event of a failure
•DALI QUERY variation so as to optimize interaction with an emergency lighting switch

ABB i-bus®KNX
General
82CDC507164D0201 | DG/S x.64.1.1
1.2.1 Emergency lighting tests
The DG/S x.64.1.1 acts as a gateway between self-contained emergency lighting systems and a KNX
building automation system. This allows DALI-based emergency lighting to IEC 62386-202 to be controlled
and monitored with a KNX control panel.
A DALI device to IEC 62386-202 (device type 1), for self-contained emergency lights, is described in this
manual in shortened form as an emergency lighting converter.
The gateway itself provides no functionality in terms of the emergency lighting regulations, e.g. logging or
other associated stipulated functions. It is used exclusively as a gateway between KNX group objects and
DALI commands.
The various mandatory tests for emergency lighting are controlled by KNX group objects. The test
sequence is subsequently monitored by KNX group objects, and the results are signaled by further group
objects on the KNX.
A further option for emergency lighting tests is the use of an automated test interval controlled by the DALI
emergency lighting converter itself. The interval duration is defined by KNX parameters. KNX group
objects transmit the results.
Function test
The function test is implemented by the emergency lighting converter itself. The test is requested at a
parametrizable interval in the emergency lighting converter or by a KNX group object. The test covers the
functional security of the emergency lighting converter electronics and correct operation of a lamp and a
switch-over device for an individual battery.
Duration test
The duration test is implemented on the basis of IEC 62386-202 and is used to determine whether the
individual battery supplies the system within the limits of the rated operating duration in emergency lighting
operation.
Partial duration test
The gateway controls the partial duration test with the aid of the DALI device duration test. This is possible
because a partial duration test is not stipulated or described by the standards. It is just an additional option
to improve the operation readiness of emergency lighting simply and quickly without fully discharging the
battery.
The partial duration test is a duration test which is terminated by the gateway after a set time. Therefore,
for the test to run there must be a connection between the gateway and the emergency lighting converter.
If the gateway is unable to stop the test, it runs for the full duration.

ABB i-bus®KNX
General
DG/S x.64.1.1 | 2CDC507164D0201 9
Inhibit/rest mode
Rest mode is a state in which the emergency light is switched off during its emergency lighting operation.
Inhibit mode is a timed emergency lighting converter state in which the emergency light does not switch to
emergency operation in the event of a mains voltage failure.
Danger
In both cases, the emergency light no longer fulfils its safety function and remains off.
For this reason, use this function with great care. It can be helpful to use Inhibit/rest mode during the
construction phase when the power supply is often switched off, to prevent the emergency lighting battery
from constantly charging/discharging and thus conserve the emergency light.

ABB i-bus®KNX
General
10 2CDC507164D0201 | DG/S x.64.1.1
1.3 General information on DALI and standards
The requirements for modern lighting technology are extremely varied. Historically, lighting was only
required for visual tasks, but nowadays there is a focus on factors such as comfort, ambience, functionality
and energy saving. Furthermore, modern lighting systems are increasingly being incorporated into building
installation facility management to monitor the status of the entire lighting system. The requirement is often
for a complex lighting management system which meets the uses of the premises. All these requirements
cannot be adequately met by traditional 1–10 V electrical installations, or only at considerable effort and
cost. The DALI standard (EN 62386, formerly EN 60929) has emerged against this background in
conjunction with leading manufacturers of lamp ballasts. It describes and defines the DALI (Digital
Addressable Lighting Interface) digital interface for lighting technology equipment.
DALI has become established as an independent standard in the field of lighting technology. The range of
ballasts, transformers, dimmers and relays with DALI interfaces has decisively influenced modern lighting
technology.
Part 202 of DALI standard 62386 standardizes telegrams, which communicate with emergency lighting
units (converters) in self-contained emergency lighting with individual batteries. These standardized DALI
telegrams can be used to trigger emergency lighting tests (e.g. function or duration tests). The test results
are provided on the DALI by the DALI emergency lighting converter.
This DALI technology allows cyclically required emergency lighting tests to be triggered via a higher-level
building management control system and can also document the result.

ABB i-bus®KNX
General
DG/S x.64.1.1 | 2CDC507164D0201 11
1.4 Comparison of ABB i-bus®DALI gateways
The differences between DALI gateways
DG/S1.64.1.1 DALI-Gateway, Basic, 1-fold, MDRC and
DG/S 2.64.1.1 DALI-Gateway, Basic, 2-fold, MDRC
are described below.
The differences are listed briefly in the table below. A detailed description can be found in the chapters that
follow.
Property
DG/S 1.16.1
Control
Group/individual
DG/S 2.16.1
Control
Group/individual
Design
MDRC
MDRC
Mounting width 4 4
DALI outputs 1 2
DALI devices (ballasts)
per gateway
1 x 64
(ballasts and emergency lighting
converters)
2 x 64
(ballasts and emergency lighting
converters)
DALI emergency lighting
converters 1 x 64 2 x 64
Lighting groups per gateway 1 x 16 (DALI) 2 x 16 (DALI)
DALI addressing
1 x 64 individual
2 x 64 individual
DALI voltage Integrated power supply Integrated power supply
.

ABB i-bus®KNX
Device technology
12 2CDC507164D0201 | DG/S x.64.1.1
2 Device technology
The KNX ABB i-bus®DALI Gateway
Basic DG/S
x.64.1.1 is a KNX modular
installation device (MDRC) in Pro
M
design for installation in the distribution
board on a 35
mm mounting rail.
I
t is a DALI Single-Master controller to
DALI standard
EN 62386 Parts 101ed2
and 103ed1.
It supports type 0 and type 1 DALI
operating dev
ices with DALI interfaces
to
EN 62386 and these can be integrated
into a KNX building installation. The
gateway connects
to the ABB i-bus®via
a KNX connection terminal on the device
shoulders.
The DALI Gateways differ in the number
of DALI outputs. They are equivalent, and
each of them has the same technical
properties and functions.
Up to 64 DALI devices can be connecte
d
to each DALI output.
Both "normal" lamps
(DALI type 0) and battery operated
emergency lighting (DALI type 1) can be
connected to the DALI output in a mixed
configuration.
The lamps are variably controlled via
KNX per DALI output via
-
Broadcast (all lamps jointly)
-
16 lighting groups
-
64 individual lamps
-
16 scenes
-
64 self-contained emergency lights
The fault status (lamps, ballasts or
emergency lighting converters) of each
DALI device or of the lighting group is
sent on the KNX by a variety of KNX
group objects.
In addition to the standard functions, e.g.
switching, dimming and brightness value
setting with the corresponding feedback,
the DALI gateway has Staircase lighting,
Scene, Slave, Forced operation and
Block functions. The lighting groups or
individual lamps can be integrated into
an energy-efficient building automation
system via a KNX presence detector or
light controller.
Function, duration and partial duration
tests and battery tests for emergency
lighting systems with individual batteries
to EN 62386-202 can be triggered and
stopped via KNX. The results are
provided on the KNX.
The DALI gateway has a wide-range
power supply input. No separate DALI
power supply is required. The DALI
power supply for 64 DALI devices per
output is integrated into the DALI
gateway.
The ABB i-bus®Tool permits
commissioning (DALI) and diagnostics
without the ETS.
2CDC071006S0016
2CDC071007S0016

ABB i-bus®KNX
Device technology
DG/S x.64.1.1 | 2CDC507164D0201 13
2.1 Technical data
KNX DALI gateway
DALI Single-Master Controller
EN 62386 Parts 101ed2 and 103ed1
Supply
Gateway supply voltage
Voltage range 100 – 240 V AC 85…265 V AC, 50/60 Hz
110…240 V DC
Power consumption total via mains*)DG/S 1.64.1.1 DG/S 2.64.1.1 maximum 6 W maximum 11 W
Current consumption total via mains*)maximum 25 mA maximum 48 mA
Leakage loss total for device*)maximum 2 W maximum 4 W
KNX current consumption Maximum 10 mA
Power consumption via KNX
Maximum 210 mW
*)at 230 V AC and max. load
DALI outputs (channels)
Number of outputs
DG/S 1.64.1.1 DG/S 2.64.1.1
1 2
Voltage proof, short circuit proof
Number of DALI devices 230 V AC
Maximum 64 per output to EN 62386; DALI
devices for emergency lighting with individual
battery to EN 62386-202 are supported.2)
Distance between gateway and last DALI device
Cable cross-section 0.5 mm2
0.75 mm2
1.0 mm2
1.5 mm2
100 m1)
150 m1)
200 m1)
300 m1)
Connections
KNX
KNX connection terminal,
0.8 mm Ø, single core
DALI outputs and
Mains voltage Screw terminal, universal head 0.2…4 mm2fine stranded
0.2…6 mm2single core
Tightening torque
Max. 0.6 Nm
Operating and display elements
Button DALI output test
Push button/LED
For allocation of the physical KNX address
LED , green Operation readiness indicator
LED , yellow
Display of DALI fault
Protection degree IP 20 To EN 60529
Protection class II To EN 61140
Isolation category
Overvoltage category
Pollution degree
III according to EN 60664-1
2 to EN 60664-1
KNX safety extra low voltage SELV 24 V DC
DALI voltage Typical 16 V DC (9.5…22.5 V DC)
No-load voltage
Lowest supply current at 11.5 V DC
Highest supply current
to EN 60929 and EN 62386
16 VDC
160 mA
250 mA
Temperature range Operation -5 °C…+45 °C
Storage
-25…+55 °C
Transport
-25…+70 °C

ABB i-bus®KNX
Device technology
14 2CDC507164D0201 | DG/S x.64.1.1
Environmental conditions
Humidity
Atmospheric pressure Maximum 93%, moisture condensation should
be excluded
Atmosphere up to 2,000 m
Design Modular installation device (MDRC) Modular installation device, Pro M
Dimensions
90 x 70 x 63.5 mm (H x W x D)
Mounting width
4x 18 mm modules
Mounting depth
68 mm
Installation
On 35 mm mounting rail
To EN 60715
Mounting position
any
Weight DG/S 1.64.1.1 DG/S 2.64.1.1
0.13 kg 0.15 kg
Housing, color
Plastic housing, gray Halogen-free
Flammability V-0 as per UL94
Approvals
KNX to EN 50 090-1, -2
EN 50 491-5-2
Certification
CE mark In accordance with the EMC directive and low
voltage directive
1) The length refers to the entire routed DALI control cable. The maximum values are rounded and refer to the resistance value. EMC influences are
not taken into account and therefore the values should be considered as absolute maximum values.
2) Both "normal" lamps and battery operated emergency lighting can be connected in a mixed configuration to the DALI output. However, the maximum
number of DALI devices may not exceed 64.
Device type
Application
Maximum number of
Group objects
Maximum number of
Group addresses
Maximum number of
assignments
DG/S 1.64.1.1
DALI Basic 1f /…*
1,119
2,000
2,000
DG/S 2.64.1.1 DALI Basic 2f/…* 2,233 4,000 4,000
* … = Current version number of the application. Please refer to the software information on our website for this purpose.
Note
The gateways are compliant with SELV properties to IEC 60364-4-41 (DIN VDE 0100-410).
DALI does not need to feature SELV properties, and it is possible to route the DALI control line together
with the mains voltage in a multi-core cable.
Note
ETS and the current version of the device application program are required for programming.
The current version of the application program is available for download at www.abb.com/knx.After
import into ETS, it is available there under ABB/Illumination/DALI.
The device does not support the locking function of a KNX device in ETS. Using a BCU code to inhibit
access to all the project devices has no effect on this device. Data can still be read and programmed.
Note
Together with the ETS 5, the Gateways support programming with long frames to permit rapid data
transfer between the ETS and Gateway. The programming time is more than halved, particularly in case
of a full download.

ABB i-bus®KNX
Device technology
DG/S x.64.1.1 | 2CDC507164D0201 15
2.2 Connection diagram
1 Label carrier
2 KNX programming push button
3 KNX programming LED (red)
4 KNX connection
5 Cover cap
6 Gateway supply voltage
7 DALI output (1 x DG/S 1.64.1.1, 2 x DG/S 2.64.1.1)
8 Operation LED (green)
9 Manual operation A/B
10 DALI status LED A / B (yellow)
11 DALI devices (DALI device type 0 and 1)
2CDC072042F0015

ABB i-bus®KNX
Device technology
16 2CDC507164D0201 | DG/S x.64.1.1
2.3 Dimension drawing
DG/S x.64.1.1
2CDC072033F0015

ABB i-bus®KNX
Device technology
DG/S x.64.1.1 | 2CDC507164D0201 17
2.4 Mounting and installation
The gateways are modular installation devices for installation in the distribution board on 35 mm mounting
rails to EN 60715. They can be installed in any mounting position.
Electrical connection is via screw terminals. Connection to the KNX is via the supplied KNX connection
terminal. The terminal assignment is located on the housing.
The devices are ready to operate when the KNX voltage and gateway supply voltage are applied.
The devices must be accessible for the purposes of operation, testing, visual inspection, maintenance and
repair in compliance with VDE 0100-520.
Commissioning requirement
Gateway commissioning requires a PC with ETS and a KNX interface, e.g. USB or IP.
DALI device group assignment and emergency lighting converter configuration are carried out with the
ABB i-bus®Tool.
The emergency lighting battery must be charged in order to commission the DALI emergency lighting
converter. Commissioning is not possible during emergency lighting operation.
Important
Acceptance of the emergency lighting monitoring must be discussed with the relevant approval agency.
Mounting and commissioning may only be carried out by electrical specialists. The applicable standards,
directives, regulations and specifications for the country in question must be observed when planning and
setting up electrical installations and security systems for intrusion and fire detection.
Protect the device from moisture, dirt and damage during transport, storage and operation.
Do not operate the device outside the specified technical data.
Only operate the device in a closed housing (distribution board).
Switch off the device supply voltage before mounting.
Danger
To avoid dangerous touch voltages which originate through feedback from differing phase conductors,
all poles must be disconnected when extending or modifying the electrical connections.
Danger
DALI is not a SELV (Safety Extra Low Voltage) system, therefore DALI control cables and the 230 V
power supply cable must be routed into a single cable. Observe the corresponding installation
regulations.

ABB i-bus®KNX
Device technology
18 2CDC507164D0201 | DG/S x.64.1.1
Manual operation
The gateways have a manual operation option to switch DALI lamps on and off at the outputs. However
this excludes DALI single battery lamps, which cannot be manually operated.
Supplied state
The device is supplied with the physical address 15.15.255. The application program is preloaded.
It is therefore only necessary to load group addresses and parameters during commissioning.
However, the complete application program can be reloaded if required. Longer downtime may result if the
application program is changed or after a discharge.
Allocation of the physical address
The physical address is assigned and programmed in ETS.
The device shoulder features a push button for allocation of the physical device address.
The red LED lights up after the button has been pushed. It switches off as soon as ETS has assigned
the physical address or the button is pressed again.
Download response
Because of the complexity of the device, the progress bar for download may take up to 90 seconds to
appear depending on the PC used.
Cleaning
If devices become dirty, they can be cleaned using a dry cloth or a cloth dampened with a soapy solution.
Corrosive agents or solutions must never be used.
Maintenance
The device is maintenance-free. In the event of damage, e.g. during transport and/or storage, do not carry
out any repairs.