ABTronic NARL User manual

PAGE 1ABTRONIC™NARL™ USER MANUAL
USER MANUAL

PAGE 2 ABTRONIC™NARL™ USER MANUAL
Congratulations on your choice of the ABTRONIC™
NARL™ patented slimming technology.
Please read this manual before rst use.
DEVICE DESCRIPTION
The ABTRONIC™NARL™ combines the patented NARL
ultrasound technology with the proven AbTronic EMS
technology.
It combines benecial Electro Muscle Stimulation (EMS)
pulses with advanced and safe ultrasound signals in an
easy to use unit.
The AbTronic™NARL™ unit generates very specic
ultrasound waves with each of the NARL™pads to stimulate
the target areas, it further sends gentle electrical pulses
to each of the NARL™ pads which cause your muscle to
contract and then relax.
These impulses are designed to copy the natural nerve
signals to obtain ecient and actual muscular contractions.
To achieve best results, we recommend light exercise like
walking or even housework after the NARL ultrasound
stimulation.

PAGE 3ABTRONIC™NARL™ USER MANUAL
CONTENTS:
1 x Control unit
4 x NARL™pads
1 x Micro USB charging cable
4 x Conductive gel pads
2 x Elastic belt
2 x Soft & Elastic Hook
1 x Carry bag
1 x Manual
1 x Quick start guide

PAGE 4 ABTRONIC™NARL™ USER MANUAL
UNIT
Connectors for NARL™ pads.
Pair 1&2 (black & white) and 3&4
(black & white) for EMS output
When no NARL™ pad is connected
the LCD will fast blink!
1234
LCD Display
Control
buttons
Micro USB
jack for
recharging
battery
For standard
USB charger
with 5V
output
Connectors for
NARL™ pads

PAGE 5ABTRONIC™NARL™ USER MANUAL
LCD DISPLAY
To give an additional NARL ultrasound output indication
the unit will vibrate lightly during NARL ultrasound output.
When no NARL™ pads are connected the unit will not
function and the LCD will fast blink!
Ultrasound
Module
(transducer)
EMS stimulation
area
NARL™ PADS
EMS indicator
Slow blinking =
EMS output
Rechargeable battery
level indicator Mode A
EMS output level
Mode 1
Mode B
Timer solid = operation
Blinking = paused operation
Mode 2
NARL ultrasound
indicator
Slow blinking =
Ultrasound
output
SONIC
MIN
NARL10 EMS A 30
EMS B 30N10+E10
EMS

PAGE 6 ABTRONIC™NARL™ USER MANUAL
CONTROLS
Mode 2
EMS output level adjustment
Mode 1
Press & hold for 2
seconds to switch the
unit on or o
Mode A
Mode B
Press M followed by any
mode button to switch
mode during operation
Start / Pause button

PAGE 7ABTRONIC™NARL™ USER MANUAL
AUTO FUNCTIONS
A self-timer switches the unit o after 20 seconds of no
operation.
If the unit is paused it will switch o after 1 min 20 secs of pause.
The LCD display switch o to save power after 20 seconds.
When no NARL™ pad is connected to the device & stick to
the skin the LCD will fast blink when is pressed and
not function.
Connect at least one pad for NARL function and one pair
black and white pads for EMS function to work!
Press and hold the on/o button for 2 seconds to
switch the unit on or o
Press the start/pause button to start or pause
the selected mode
Remark: Default mode after the unit is switched
on is mode 2
Press the M button followed by any of the 4 mode
buttons (1,2,A,B) to change the mode
Decrease / increase EMS output level during EMS
operation from level 0-9.
Selects NARL ultrasound mode
Selects EMS only mode
&
&

PAGE 8 ABTRONIC™NARL™ USER MANUAL
BATTERY
The unit has a built in rechargeable Lithium Polymer
battery.
Recharge the battery by plugging a micro USB cable from a
standard 5V 1A USB power source into the unit.
The Battery icon will ash during charging when the device
is ON and display a solid battery icon when fully charged.
The unit can operate several hours on a fully charged
battery.

PAGE 9ABTRONIC™NARL™ USER MANUAL
BEFORE FIRST USE:
Charge the unit until the battery indicator is solid, indicating
the batteries are fully charged. The device must be turned
ON in order to see the battery indicator.
Plug the connectors of the NARL™ pads into the unit
observing the black and white colour indicators on the unit.
Remark: For EMS operation a positive and negative
electrode (indicated by black and white) have to be paired.
Connectors for NARL™ pads.
Pair 1&2 (black & white) and 3&4
(black & white) for EMS output
1234

PAGE 10 ABTRONIC™NARL™ USER MANUAL
1. Take the gels pads out of the bag and peel o one
side of the protective lm which has no wording
from the gel pad.
2. Stick the gel pads onto each of the 4 conductive
areas on the rear side of the NARL™ pad.
* Please make sure the gel pad has protective lm, which
has no wording, is stick onto the stimulation pad
• If there is an air bubbles under the gel pads use a nger
and press the air to the side of the pad to escape.
Do not use damaged, worn or dirty gel pads as this might
result in burns.
Always, stick gel pads to all electrodes while using the
product. Don’t apply the product directly to skin, this may
be painful or cause irritation or burns.
Precautions
APPLYING GEL PADS