ADF Web HD67B77-A1 User manual

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
PROFINET Mast
er /
SNMP Agent
Document code: MN67B77_ENG Revision 1.000 age 1 of 27
User Manual
Revision 1.000
English
PROFINET Master / SNMP Agent -
Converter
(Order Code: HD67B77-A1)
for Website information:
http://www.adfweb.com/? roduct=HD67B77
for rice information:
http://www.adfweb.com/? rice=HD67B77-A1
Benefits and Main Features:
Triple electrical isolation
Two Ethernet ports
Temperature range: -40°C/+85°C (-40°F/+185°F)
For others ROFINET Master devices, see also the following links:
PROFINET Master from/to
www.adfweb.com? roduct=HD67B45 (OPC UA server)
www.adfweb.com? roduct=HD67B70 (Serial)
www.adfweb.com? roduct=HD67B71 (Modbus Slave)
www.adfweb.com? roduct=HD67B72 (PROFIBUS Slave)
www.adfweb.com? roduct=HD67B73 (CAN)
www.adfweb.com? roduct=HD67B74 (CANopen)
www.adfweb.com? roduct=HD67B75 (DeviceNet Slave)
www.adfweb.com? roduct=HD67B76 (Modbus TCP slave)
www.adfweb.com? roduct=HD67B78 (EtherNet/IP Slave)
www.adfweb.com? roduct=HD67B79 (KNX)
www.adfweb.com? roduct=HD67B80 (MQTT)
www.adfweb.com? roduct=HD67B81 (BACnet slave)
www.adfweb.com? roduct=HD67B82 (IEC 61850 server)
www.adfweb.com? roduct=HD67B84 (Ethernet)
Do you have an your customer protocol?
See the following links:
www.adfweb.com? roduct=HD67003
Do you need to choose a device? do you want help?
Ask it to the following link:
www.adfweb.com?Cmd=helpme
User Manual

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
PROFINET Mast
er /
SNMP Agent
Document code: MN67B77_ENG Revision 1.000 age 2 of 27
INDEX:
age
INDEX 2
U DATED DOCUMENTATION 2
REVISION LIST 2
WARNING 2
TRADEMARKS 2
SECURITY ALERT 3
EXAM LE OF CONNECTION 4
CONNECTION SCHEME 5
CHARACTERISTICS 6
CONFIGURATION 6
OWER SU LY 7
FUNCTION MODES 8
LEDS 9
ETHERNET 10
USE OF COM OSITOR SW67B77 11
NEW ROJECT / O EN ROJECT 12
SOFTWARE O TIONS 13
SET COMMUNICATION 15
ROFINET ACCESS 17
SET SNM ACCESS 20
MIB FILE 21
U DATE DEVICE 22
MECHANICAL DIMENSIONS 24
ORDERING INFORMATIONS 25
ACCESSORIES 25
DISCLAIMER 26
OTHER REGULATIONS AND STANDARDS 26
WARRANTIES AND TECHNICAL SU ORT 27
RETURN OLICY 27
Pagina 2 di 27
UPDATED DOCUMENTATION:
Dear customer, we thank you for your attention and we remind you that
you need to check that the following document is:
Updated
Related to the product you own
To obtain the most recently updated document, note the “document code”
that appears at the top right-hand corner of each page of this document.
With this “Document Code” go to web page www.adfweb.com/download/
and search for the corresponding code on the page. Click on the proper
“Document Code” and download the updates.
REVISION LIST:
Revision Date Author Chapter Description
1.000 13/03/2019 Ff All First release version
WARNING:
ADFweb.com reserves the right to change information in this manual about
our product without warning.
ADFweb.com is not responsible for any error this manual may contain.
TRADEMARKS:
All trademarks mentioned in this document belong to their respective
owners.

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
PROFINET Mast
er /
SNMP Agent
Document code: MN67B77_ENG Revision 1.000 age 3 of 27
SECURITY ALERT:
G ENERAL I NFORMATION
To ensure safe operation, the device must be operated according to the instructions in the manual. When using the device, legal and
safety regulation are required for each individual application. The same applies also when using accessories.
I NTENDED U SE
Machines and systems must be designed so the faulty conditions do not lead to a dangerous situation for the operator (i.e.
independent limit switches, mechanical interlocks, etc.).
Q UALIFIED P ERSONNEL
The device can be used only by qualified personnel, strictly in accordance with the specifications.
Qualified personnel are persons who are familiar with the installation, assembly, commissioning and operation of this equipment and
who have appropriate qualifications for their job.
R ESIDUAL R ISKS
The device is state-of-the-art and is safe. The instruments can represent a potential hazard if they are inappropriately installed and
operated by untrained personnel. These instructions refer to residual risks with the following symbol:
This symbol indicates that non-observance of the safety instructions is a danger for people that could lead to serious injury or
death and / or the possibility of damage.
CE CONFORMITY
The declaration is made by our company. You can send an email to [email protected]om or give us a call if you need it.

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
PROFINET Mast
er /
SNMP Agent
Document code: MN67B77_ENG Revision 1.000 age 4 of 27
EXAMPLE OF CONNECTION:

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
PROFINET Mast
er /
SNMP Agent
Document code: MN67B77_ENG Revision 1.000 age 5 of 27
CONNECTION SCHEME:
Figure
1
: Connection scheme for HD67
B7
7
-
A1

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
PROFINET Mast
er /
SNMP Agent
Document code: MN67B77_ENG Revision 1.000 age 6 of 27
CHARACTERISTICS:
The HD67B77-A1 is a ROFINET Master / SNM Agent converter.
It allows the following characteristics:
Up to 4096 bytes in reading and 4096 bytes in writing;
Two-directional information between SNM and ROFINET;
Mountable on 35mm Rail DIN;
Wide power supply input range: 8…24V AC or 12…35V DC;
Wide temperature range: -40°C / 85°C [-40°F / +185°F].
CONFIGURATION:
You need Compositor SW67B77 software on your C in order to perform the following:
Define the parameter of the ROFINET;
Define the parameter of the SNM ;
Define the list of ROFINET slaves connected to the converter;
Define the list of SNM OIDs;
Export the MIB file for SNM side of the converter;
Update the device.

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
PROFINET Mast
er /
SNMP Agent
Document code: MN67B77_ENG Revision 1.000 age 7 of 27
POWER SUPPLY:
The devices can be powered between a wide range of tensions. For more details see the two tables below.
VAC
VDC
Vmin Vmax Vmin Vmax
HD67B77-A1 8V 24V 12V 35V
Consumption at 24V DC:
Device W/VA
HD67B77-A1 4
Caution: Not reverse the polarity power
HD67B77-A1

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
PROFINET Mast
er /
SNMP Agent
Document code: MN67B77_ENG Revision 1.000 age 8 of 27
FUNCTION MODES:
The device has got two functions mode depending of the position of the Dip1 of ‘Dip-Switch A’:
The first, with Dip1 in Off position (factory setting), is used for the normal working of the device.
The second, with Dip1 in On position, is used for upload the roject/Firmware.
For the operations to follow for the updating (see ‘U DATE DEVICE’ section).
According to the functioning mode, the LEDs will have specifics functions (see ‘LEDS’ section).

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
PROFINET Mast
er /
SNMP Agent
Document code: MN67B77_ENG Revision 1.000 age 9 of 27
LEDS:
The device has got six LEDs that are used to give information of the functioning status.
The various meanings of the LEDs are described in the table below.
LED Normal Mode Boot Mode
1: ON [supply voltage ]
(green)
ON: Device powered
OFF: Device not powered
ON: Device powered
OFF: Device not powered
2: MT [maintenance display]
(yellow)
ON: Maintenance are present
OFF: No maintenance are present
Blinks quickly: Boot state
Blinks very slowly (~0.5Hz): update in progress
3: BF [bus fault] (red)
ON: The Ethernet connection is defective; the I
address exists several times in the network; the own
NameOfStation exists several times in the network; no
I address has been set
Flashing: At least one configured AR is no longer in
the data exchange
OFF: No errors are present
Blinks quickly: Boot state
Blinks very slowly (~0.5Hz): update in progress
4: SF [group error] (red) ON: At least one AR is not in the data exchange
OFF: No errors are present
Blinks quickly: Boot state
Blinks very slowly (~0.5Hz): update in progress
5: Ethernet1 Tx (green) Blinks when is transmitting Ethernet frames Blinks quickly: Boot state
Blinks very slowly (~0.5Hz): update in progress
6: Ethernet2 Tx (green) Blinks when is transmitting Ethernet frames Blinks quickly: Boot state
Blinks very slowly (~0.5Hz): update in progress

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
PROFINET Mast
er /
SNMP Agent
Document code: MN67B77_ENG Revision 1.000 age 10 of 27
ETHERNET:
The Ethernet connection must be made using Connector3 or Connector4 of HD67B77-A1 with at least a Category 5E cable. The maximum
length of the cable should not exceed 100m. The cable has to conform to the T568 norms relative to connections in cat.5 up to 100 Mbps. To
connect the device to an Hub/Switch is recommended the use of a straight cable, to connect the device to a C/ LC/other is recommended
the use of a cross cable.

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
PROFINET Mast
er /
SNMP Agent
Document code: MN67B77_ENG Revision 1.000 age 11 of 27
USE OF COMPOSITOR SW67B77:
To configure the Converter, use the available software that runs with Windows called SW67B77. It is downloadable on the site
www.adfweb.com and its operation is described in this document. (This manual is referenced to the last version of the software present on
our web site). The software works with MSWindows (X , Vista, Seven, 8, 10; 32/64bit).
When launching the SW67B77, the window below appears (Fig. 2).
Note:
It is necessary to have installed .Net Framework 4.
Figure 2: Main window for SW67B7
7

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
PROFINET Mast
er /
SNMP Agent
Document code: MN67B77_ENG Revision 1.000 age 12 of 27
NEW CONFIGURATION / OPEN CONFIGURATION:
The “New Configuration” button creates the folder which contains the entire device’s configuration.
A device’s configuration can also be imported or exported:
To clone the configurations of a programmable “ ROFINET Master / SNM Agent -
Converter” in order to configure another device in the same manner, it is necessary to
maintain the folder and all its contents;
To clone a project in order to obtain a different version of the project, it is sufficient to
duplicate the project folder with another name and open the new folder with the
button “Open Configuration”.

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
PROFINET Mast
er /
SNMP Agent
Document code: MN67B77_ENG Revision 1.000 age 13 of 27
SOFTWARE OPTIONS:
By pressing the “Settings” ( ) button there is the possibility to change the language of the software and check the updatings for the
compositor.
In the section “Language” it is possible to change the language of the
software.
In the section “Connection Options”, it is possible to check if there are some
updatings of the software compositor in ADFweb.com website.
Checking the option “Check Software Update at Start of Program”, the
SW67B77 check automatically if there are updatings when it is launched.

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
PROFINET Mast
er /
SNMP Agent
Document code: MN67B77_ENG Revision 1.000 age 14 of 27
In the section “Software Settings”, it is possible to enable/disable some
keyboard’s commands for an easier navigation inside the tables contained in
the different sections of the software.

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
PROFINET Mast
er /
SNMP Agent
Document code: MN67B77_ENG Revision 1.000 age 15 of 27
SET COMMUNICATION:
This section define the fundamental communication parameters of two buses,
ROFINET and SNM .
By ressing the “Set Communication” button from the main window for SW67B77
(Fig. 2) the window “Set Communication” appears (Fig. 3).
The means of the fields for “ ROFINET Master” are:
In the fields “IP Address” the I address for ROFINET side of the converter is
defined;
In the fields “SubNet Mask” the SubNet Mask for ROFINET side of the
converter is defined;
In the fields “Gateway” the default gateway of the net is defined. This feature
can be enabled or disabled pressing the Check Box field. This feature is used
for going out of the net;
In the field "Name of Station" the name of the ROFINET node is defined.
Figure 3: “Set Communication” window

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
PROFINET Mast
er /
SNMP Agent
Document code: MN67B77_ENG Revision 1.000 age 16 of 27
The means of the fields for “SNM Agent” are:
In the field “IP ADDRESS” the I address of SNM side of the converter is defined;
In the field “SUBNET Mask” the SubNet Mask of SNM side of the converter is defined;
In the field “GATEWAY” the default gateway of the network is defined. This feature can be enabled or disabled pressing the Check
Box field. This feature is used for going out of the net;
In the field "SNMP Name of Station" the name for SNM Agent station is defined;
In the field "Contact" the contact for SNM Agent station is defined;
In the field "Location" the location for SNM Agent station is defined;
In the field “Version” the version of SNM protocol is defined. If version 3 is selected, the fields below appears:
o“User”: the user for the SNM access is defined;
o“Security Level”: the type of security used is defined;
o“Authority”: if Authority level is enabled, in this field the password is defined;
o“Authority Mode”: if Authority level is enabled, in this field the type of encryption during the authorization phase is define;
o“Privacy”: if rivacy level is enabled, in this field the key is defined;
o“Privacy Mode”: if rivacy level is enabled, in this field the type of encryption during the communication is defined.

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
PROFINET Mast
er /
SNMP Agent
Document code: MN67B77_ENG Revision 1.000 age 17 of 27
Figure 4: “Definition of ROFINET Devices resent in Network” window
PROFINET ACCESS:
By ressing the “PROFINET Access” button from the main window for SW67B77 (Fig. 2) the window “Definition of ROFINET Devices
resent in Network” appears (Fig. 4).
This section is used to define the list of the ROFINET slaves to read/write with the ROFINET Master. It is possible to add the ROFINET
slaves from the hardware catalog. If a new device will be connected, it is possible to instal the GSDML file.

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
PROFINET Mast
er /
SNMP Agent
Document code: MN67B77_ENG Revision 1.000 age 18 of 27
The means of the fields below are:
If the field “Name of Station” is checked, the name of the ROFINET slave is defined;
In the field “IP Address” the I Address of the ROFINET slave is defined;
In the field “Update Time [ms]” the delay used for IO communication is defined;
In the field “Answer TimeOut” the allowed number of cycles without response from the slave is defined.
Warning:
The data from/to the slaves are mapped consecutively into the IN/OUT ROFINET arrays, following the order with which they are
defined.

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
PROFINET Mast
er /
SNMP Agent
Document code: MN67B77_ENG Revision 1.000 age 19 of 27
Figure 5: “Definition Module and/or Submodules of ROFINET Device” window
By clicking on “Modules” button, it is possible to import the modules for the selected ROFINET slave device. The window “Definition Module
and/or Submodules of ROFINET Device” appears (Fig. 5). In the main table it is possible to import the Modules of the ROFINET device in
use. In the properties below, it is possible to set the parameters of the slave. These options depends on the slave in use, refer to the manual
of the ROFINET device.
The means of the checkboxes inside the table are:
If the field “Map Only Data” is checked, only the data of the modules are mapped into the internal memory arrays. Otherwise, for
each module there will be the status of IN and OUT areas too (1 byte);
If the field “Different Word” is checked, the data of the different modules are mapped in different and consecutive words without
splitting them.

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
PROFINET Mast
er /
SNMP Agent
Document code: MN67B77_ENG Revision 1.000 age 20 of 27
SET SNMP ACCESS:
By pressing the “Set SNMP Access” button from the main window for SW67B77 (Fig. 2) the “Set SNM Access” window appears (Fig. 6). In
this section, it is possible to create the OIDs for SNM side to read or write using GET and SET commands or to be sent as TRA messages.
The window is divided into two tables, one for SNM readings and one for SNM writings.
The data of the columns in the “SNM
Read” have the following meanings:
If the field “Enable” is checked,
the SNM OID is enabled;
In the field “Community
Name” the name of the
Community is defined;
In the field “Type” the type of
data of the OID is defined
(Octet String or Integer);
If the field “On Change” is checked, the OID is sent as Trap when the data from ROFINET side change;
If the field “On CMD” is checked, the OID is sent as Trap when the data from ROFINET side is coming;
If the field “On Timer” is checked, the OID is sent as Trap cyclically;
In the field “Time (ms)” the delay time for the Trap send is defined (if “On Timer” option is checked);
In the field “Position” the starting byte of the internal memory array where taking the data is defined;
In the field “Start Bit” the starting bit of the selected osition is defined;
In the field “Num Bits/Bytes” the dimension of the OID is defined. For ‘Int’ type the dimension is in bit, for ‘String’ type the
dimension is in bytes;
In the field “Description” the description/name of the OID is defined;
In the field “IP Address” the I Address of the SNM device where addressing the Trap message is defined. This field is used only
when ‘On Change’ or ‘On Timer’ option is checked;
In the field “Conversion” it is possible to select the data conversion to apply to the data;
In the field “Mnemonic” a brief description of the OID is defined.
Figure
6
a
: “
Set SNM Access
-
> SNM Read
” window