ADF Web HD67B22-B2 User manual

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
Us
er Manual
OPC UA Client /
PROFINET
Slave
Document code: MN67B22_ENG Revision 1. Page 1 of 32
User Manual
Revision 1.
English
OPC UA Client / PROFINET Slave -
Converter
(Order Code: HD67B22-B2)
for Website information:
www.adfweb.com/?Product=HD67B22
for Price information:
www.adfweb.com/?Price=HD67B22-B2
Benefits and Main Features:
Triple electrical isolation
Power Supply 18…35V DC and 8…24 V AC
Temperature range: -4 °C/+85°C (-4 °F/+185°F)
For others OPC UA Client devices, see also the following links:
OPC UA Client fro /to …
www.adfweb.com?Product=HD67B 8 (Serial)
www.adfweb.com?Product=HD67B 9 (Modbus Slave)
www.adfweb.com?Product=HD67B 9 (Modbus TCP Slave)
www.adfweb.com?Product=HD67B11 (Bacnet Slave)
www.adfweb.com?Product=HD67B12 (CAN)
www.adfweb.com?Product=HD67B13 (CANopen)
www.adfweb.com?Product=HD67B14 (DeviceNet Slave)
www.adfweb.com?Product=HD67B15 (DMX)
www.adfweb.com?Product=HD67B16 (EtherNet/IP Slave)
www.adfweb.com?Product=HD67B17 (J1939)
www.adfweb.com?Product=HD67B18 (KNX)
www.adfweb.com?Product=HD67B19 (MQTT)
www.adfweb.com?Product=HD67B2 (NMEA0183)
www.adfweb.com?Product=HD67B21 (NMEA2000)
www.adfweb.com?Product=HD67B23 (SNMP Agent)
Do you have an your customer protocol?
See the following links:
www.adfweb.com?Product=HD67 3
Do you need to choose a device? do you want help?
Ask it to the following link:
www.adfweb.com?Cmd=helpme
User Manual

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
Us
er Manual
OPC UA Client /
PROFINET
Slave
Document code: MN67B22_ENG Revision 1. Page 2 of 32
INDEX:
Page
INDEX 2
UPDATED DOCUMENTATION 2
REVISION LIST 2
WARNING 2
TRADEMARKS 2
SECURITY ALERT 3
EXAMPLE OF CONNECTION 4
CONNECTION SCHEME 5
CHARACTERISTICS 6
CONFIGURATION 6
POWER SUPPLY 7
FUNCTION MODES 8
LEDS 9
ETHERNET 1
USE OF COMPOSITOR SW67B22 11
NEW PROJECT / OPEN PROJECT 12
SOFTWARE OPTIONS 13
SET COMMUNICATION 15
OPC UA ACCESS 17
UPDATE DEVICE 23
OPC UA DIAGNOSTIC OVER PROFINET 25
MECHANICAL DIMENSIONS 26
PLC CONFIGURATION 27
ORDERING INFORMATIONS 3
ACCESSORIES 3
DISCLAIMER 31
OTHER REGULATIONS AND STANDARDS 31
WARRANTIES AND TECHNICAL SUPPORT 32
RETURN POLICY 32
Pagina 2 di 32
UPDATED DOCUMENTATION:
Dear customer, we thank you for your attention and we remind you that
you need to check that the following document is:
Updated
Related to the product you own
To obtain the most recently updated document, note the “document code”
that appears at the top right-hand corner of each page of this document.
With this “Document Code” go to web page www.adfweb.com/download/
and search for the corresponding code on the page. Click on the proper
“Document Code” and download the updates.
REVISION LIST:
Revision Date Author Chapter Description
1. 13/ 3/2 19 Tf All First release version
WARNING:
ADFweb.com reserves the right to change information in this manual about
our product without warning.
ADFweb.com is not responsible for any error this manual may contain.
TRADEMARKS:
All trademarks mentioned in this document belong to their respective
owners.

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
Us
er Manual
OPC UA Client /
PROFINET
Slave
Document code: MN67B22_ENG Revision 1. Page 3 of 32
SECURITY ALERT:
G ENERAL I NFORMATION
To ensure safe operation, the device must be operated according to the instructions in the manual. When using the device, legal and
safety regulation are required for each individual application. The same applies also when using accessories.
I NTENDED U SE
Machines and systems must be designed so the faulty conditions do not lead to a dangerous situation for the operator (i.e.
independent limit switches, mechanical interlocks, etc.).
Q UALIFIED P ERSONNEL
The device can be used only by qualified personnel, strictly in accordance with the specifications.
Qualified personnel are persons who are familiar with the installation, assembly, commissioning and operation of this equipment and
who have appropriate qualifications for their job.
R ESIDUAL R ISKS
The device is state-of-the-art and is safe. The instruments can represent a potential hazard if they are inappropriately installed and
operated by untrained personnel. These instructions refer to residual risks with the following symbol:
This symbol indicates that non-observance of the safety instructions is a danger for people that could lead to serious injury or
death and / or the possibility of damage.
CE CONFORMITY
The declaration is made by our company. You can send an email to [email protected]om or give us a call if you need it.

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
Us
er Manual
OPC UA Client /
PROFINET
Slave
Document code: MN67B22_ENG Revision 1. Page 4 of 32
EXAMPLE OF CONNECTION:

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
Us
er Manual
OPC UA Client /
PROFINET
Slave
Document code: MN67B22_ENG Revision 1. Page 5 of 32
Figure
1
: Connection scheme for HD67
B
22
-
B2
CONNECTION SCHEME:

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
Us
er Manual
OPC UA Client /
PROFINET
Slave
Document code: MN67B22_ENG Revision 1. Page 6 of 32
CHARACTERISTICS:
The HD67B22-B2 is a OPC UA Client / PROFINET Slave converter.
It allows the following characteristics:
Up to 144 bytes in reading and 144 bytes in writing;
Two-directional information between PROFINET and OPC UA;
Mountable on 35mm Rail DIN;
Wide power supply input range: 8…24V AC or 12…35V DC;
Wide temperature range: -4 °C / 85°C [-4 °F / +185°F].
CONFIGURATION:
You need Compositor SW67B22 software on your PC in order to perform the following:
Define the parameter of the OPC UA;
Define the parameter of the PROFINET;
Define the list of OPC UA servers connected to the converter;
Update the device.

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
Us
er Manual
OPC UA Client /
PROFINET
Slave
Document code: MN67B22_ENG Revision 1. Page 7 of 32
POWER SUPPLY:
The devices can be powered between a wide range of tensions. For more details see the two tables below.
VAC
VDC
V in V ax V in V ax
HD67B22-B2 8V 24V 12V 35V
Consumption at 24V DC:
Device W/VA
HD67B22-B2 4
Caution: Not reverse the polarity power
HD67B22-B2

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
Us
er Manual
OPC UA Client /
PROFINET
Slave
Document code: MN67B22_ENG Revision 1. Page 8 of 32
FUNCTION MODES:
The device has got two functions mode depending of the position of the Dip1 of ‘Dip-Switch A’:
The first, with Dip1 in Off position (factory setting), is used for the normal working of the device.
The second, with Dip1 in On position, is used for upload the Project/Firmware.
For the operations to follow for the updating (see ‘UPDATE DEVICE’ section).
According to the functioning mode, the LEDs will have specifics functions (see ‘LEDS’ section).

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
Us
er Manual
OPC UA Client /
PROFINET
Slave
Document code: MN67B22_ENG Revision 1. Page 9 of 32
LEDS:
The device has got six LEDs that are used to give information of the functioning status.
The various meanings of the LEDs are described in the table below.
LED Nor al Mode Boot Mode
1: Device State (green) Blinks slowly (~1Hz) Blinks quickly: Boot state
Blinks very slowly (~0.5Hz): update in progress
2: OPC UA comm. (yellow) Flashing: OPC UA response
OFF: No OPC UA response
Blinks quickly: Boot state
Blinks very slowly (~0.5Hz): update in progress
3: PROFINET comm. (yellow) Flashing: PROFINET communication
OFF: No PROFINET communication
Blinks quickly: Boot state
Blinks very slowly (~0.5Hz): update in progress
4: OPC UA error (yellow) ON: At least one OPC UA Server is disconnected
OFF: all OPC UA Servers are connected
Blinks quickly: Boot state
Blinks very slowly (~0.5Hz): update in progress
5: Link Ethernet (green) ON: Ethernet cable connected
OFF: Ethernet cable disconnected
ON: Ethernet cable connected
OFF: Ethernet cable disconnected

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
Us
er Manual
OPC UA Client /
PROFINET
Slave
Document code: MN67B22_ENG Revision 1. Page 1 of 32
ETHERNET:
The Ethernet connection must be made using Connector3 of HD67B22-B2 with at least a Category 5E cable. The maximum length of the
cable should not exceed 1 m. The cable has to conform to the T568 norms relative to connections in cat.5 up to 1 Mbps. To connect the
device to an Hub/Switch is recommended the use of a straight cable, to connect the device to a PC/PLC/other is recommended the use of a
cross cable.

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
Us
er Manual
OPC UA Client /
PROFINET
Slave
Document code: MN67B22_ENG Revision 1. Page 11 of 32
USE OF COMPOSITOR SW67B22:
To configure the Converter, use the available software that runs with Windows called SW67B22. It is downloadable on the site
www.adfweb.com and its operation is described in this document. (This manual is referenced to the last version of the software present on
our web site). The software works with MSWindows (XP, Vista, Seven, 8, 1 ; 32/64bit).
When launching the SW67B22, the window below appears (Fig. 2).
Note:
It is necessary to have installed .Net Framework 4.
Figure 2: Main window for SW67B22

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
Us
er Manual
OPC UA Client /
PROFINET
Slave
Document code: MN67B22_ENG Revision 1. Page 12 of 32
NEW CONFIGURATION / OPEN CONFIGURATION:
The “New Configuration” button creates the folder which contains the entire device’s configuration.
A device’s configuration can also be imported or exported:
To clone the configurations of a programmable “OPC UA Client / PROFINET Slave -
Converter” in order to configure another device in the same manner, it is necessary to
maintain the folder and all its contents;
To clone a project in order to obtain a different version of the project, it is sufficient to
duplicate the project folder with another name and open the new folder with the
button “Open Configuration”.

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
Us
er Manual
OPC UA Client /
PROFINET
Slave
Document code: MN67B22_ENG Revision 1. Page 13 of 32
SOFTWARE OPTIONS:
By pressing the “Settings” ( ) button there is the possibility to change the
language of the software and check the updatings for the compositor.
In the section “Language” it is possible to change the language of the
software.
In the section “Connection Options”, it is possible to check if there are some
updatings of the software compositor in ADFweb.com website.
Checking the option “Check Software Update at Start of Progra ”, the
SW67B22 check automatically if there are updatings when it is launched.

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
Us
er Manual
OPC UA Client /
PROFINET
Slave
Document code: MN67B22_ENG Revision 1. Page 14 of 32
In the section “Software Settings”, it is possible to enable/disable some
keyboard’s commands for an easier navigation inside the tables contained in
the different sections of the software.

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
Us
er Manual
OPC UA Client /
PROFINET
Slave
Document code: MN67B22_ENG Revision 1. Page 15 of 32
SET COMMUNICATION:
This section define the fundamental communication parameters of two buses, OPC UA
Client and PROFINET.
By Pressing the “Set Co unication” button from the main window for SW67B22 (Fig.
2) the window “Set Communication” appears (Fig. 3).
The means of the fields for “OPC UA Client” are:
In the field “IP Address” the IP address for OPC UA side of the converter is
defined;
In the field “SubNet Mask” the SubNet Mask for OPC UA side of the converter is
defined;
In the field “Gateway” the default gateway of the net is defined. This feature can
be enabled or disabled pressing the Check Box field. This feature is used for going
out of the net;
In the field “DNS” the IP Address of the DNS server is defined. This feature can be
enabled or disabled pressing the Check Box field.
The means of the fields for “PROFINET” are:
In the field “IP Address” the IP address for PROFINET side of the converter is
defined;
In the field “SubNet Mask” the SubNet Mask for PROFINET side of the converter
is defined;
In the field “Gateway” the default gateway of the net is defined. This feature can
be enabled or disabled pressing the Check Box field. This feature is used for going
out of the net;
In the field “Tunneling Port” the port used for transparent UDP communication is
defined;
In the field "Na e of Station" the name of PROFINET side of the converter is
defined;
In the field “Nu ber Bytes Input” the number of input byte of the slave station
is defined; Figure 3: “Set Communication” window

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
Us
er Manual
OPC UA Client /
PROFINET
Slave
Document code: MN67B22_ENG Revision 1. Page 16 of 32
In the field “Nu ber Bytes Output” the number of output byte of the slave station is defined;
In the field “Diagnostic” insert the starting byte of the PROFINET array where you will save the diagnostic of OPC UA. It is possible
to enable/disable this function using the checkbox.
For more informations about the diagnostic, see “Diagnostic” section on page 25.
The means of the fields for “NTP (Network Time Protocol)” are:
In the field “Server URL” the URL or the IP Address of the NTP Server is defined;
In the field “Poll Ti e (seconds)” the polling time for the time synchronization is defined.

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
Us
er Manual
OPC UA Client /
PROFINET
Slave
Document code: MN67B22_ENG Revision 1. Page 17 of 32
Figure 4: “
O C UA Client Acce
ss
” window
OPC UA ACCESS:
By Pressing the “OPC UA Client Access” button from the main window for SW67B22 (Fig. 2) the window “OPC UA Client Access” appears
(Fig. 4).
This section is used to define the list of the OPC UA Servers to read/write with the OPC UA Client.

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
Us
er Manual
OPC UA Client /
PROFINET
Slave
Document code: MN67B22_ENG Revision 1. Page 18 of 32
Figure 5: “Add O C UA Server” Figure 6: “Modify O C UA Server”
By clicking on “Add”, it is possible to add a new OPC UA Server inserting its characteristics (Server Address, Authorization, Security Type…).
The window “Add OPC UA Server” appears (Fig. 5). By clicking on “Modify”, it is possible to change these characteristics for the selected
Server. The window “Modify OPC UA Server” appears (Fig. 6).

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
Us
er Manual
OPC UA Client /
PROFINET
Slave
Document code: MN67B22_ENG Revision 1. Page 19 of 32
Figure 7: “Scan Server O C UA” window
By clicking on “Scan”, it is possible to get the list of available variables from the selected Server. The window “Scan Server OPC UA” appears
(Fig. 7).
The means of the checkboxes inside the table are:
If the field “Read” is checked, the variable can be read;
If the field “Write” is checked, the variable can be written.
Note:
For each variable, it is possible to uncheck these fields and the variable will not be used in read/write.

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
Us
er Manual
OPC UA Client /
PROFINET
Slave
Document code: MN67B22_ENG Revision 1. Page 2 of 32
Figure 8: “Variables in Read” section
After the scan, the selected variables will appear in “Variables in Read” and/or “Variables in Write” sections, in the lower part of the window
“OPC UA Client Access” (Fig. 4).
The “Variables in Read” section is used to define the OPC UA variables to read on PROFINET side (Fig. 8).
The means of the fields are:
If the field “Enable” is checked, the OPC UA variable is enabled;
In the field “Display na e” the name of the OPC UA variable is defined;
In the field “Node Type ” the type of the OPC UA node, which includes the variable, is defined;
In the field “Node ID” the name of the OPC UA node, which includes the variable, is defined;
In the field “Var Type” the data format of the OPC UA variable is defined;
In the field “Na e Space Index” the Name Space Index of the node, which includes the variable, is defined;
In the field “Ti e ( s)” the delay in ms between two readings of the variable is defined;
In the field “Position” the starting byte of the PROFINET array where saving the value is defined;
In the field “Mne onic” a description of the variable is defined.