ADLINK Technology DLAP-3200-CF Series User manual

DLAP-3200-CF Series
Embedded System supporting MXM Graphics Module with
8th/9th Generation Intel® Core™ i7/i5/i3 in LGA1151 Socket
User’s Manual
Manual Rev.: 1.0
Revision Date: August 13, 2021
Part No: 50M-00004-1000

ii
Revision History
Revision Release Date Description of Change(s)
1.0 2021-08-13 Initial release

Preface iii
DLAP-3200-CF
Preface
Copyright © 2021 ADLINK Technology Inc.
This document contains proprietary information protected by copy-
right. All rights are reserved. No part of this manual may be repro-
duced by any mechanical, electronic, or other means in any form
without prior written permission of the manufacturer.
Disclaimer
The information in this document is subject to change without prior
notice in order to improve reliability, design, and function and does
not represent a commitment on the part of the manufacturer.
In no event will the manufacturer be liable for direct, indirect, spe-
cial, incidental, or consequential damages arising out of the use or
inability to use the product or documentation, even if advised of
the possibility of such damages.
Environmental Responsibility
ADLINK is committed to fulfill its social responsi-
bility to global environmental preservation
through compliance with the European Union's
Restriction of Hazardous Substances (RoHS)
directive and Waste Electrical and Electronic
Equipment (WEEE) directive. Environmental pro-
tection is a top priority for ADLINK. We have
enforced measures to ensure that our products,
manufacturing processes, components, and raw
materials have as little impact on the environment as possible.
When products are at their end of life, our customers are encour-
aged to dispose of them in accordance with the product disposal
and/or recovery programs prescribed by their nation or company.
Battery Labels (for products with battery)
ᘄ㟁ụㄳᅇᨲ

iv Preface
California Proposition 65 Warning
WARNING: This product can expose you to chemicals
including acrylamide, arsenic, benzene, cadmium,
Tris(1,3-dichloro-2-propyl) phosphate (TDCPP), 1,4-
Dioxane, formaldehyde, lead, DEHP, styrene, DINP, BBP, PVC,
and vinyl materials, which are known to the State of California to
cause cancer, and acrylamide, benzene, cadmium, lead, mercury,
phthalates, toluene, DEHP, DIDP, DnHP, DBP, BBP, PVC, and
vinyl materials, which are known to the State of California to cause
birth defects or other reproductive harm. For more information go
to www.P65Warnings.ca.gov.
Trademarks
Product names mentioned herein are used for identification pur-
poses only and may be trademarks and/or registered trademarks
of their respective companies.
Conventions
Take note of the following conventions used throughout this
manual to make sure that users perform certain tasks and
instructions properly.
NOTE:
NOTE:
Additional information, aids, and tips that help users perform
tasks.
CAUTION:
Information to prevent minor physical injury, component dam-
age, data loss, and/or program corruption when trying to com-
plete a task.
ATTENTION: Informations destinées à prévenir les blessures
corporelles mineures, les dommages aux composants, la perte
de données et/ou la corruption de programme lors de l'exécu-
tion d'une tâche.
WARNING:
Information to prevent serious physical injury, component
damage, data loss, and/or program corruption when trying to
complete a specific task.
AVERTISSEMENT: Informations destinées à prévenir les bles-
sures corporelles graves, les dommages aux composants, la
perte de données et/ou la corruption de programme lors de
l'exécution d'une tâche spécifique.

Table of Contents v
DLAP-3200-CF
Table of Contents
Preface.................................................................................... iii
List of Tables......................................................................... vii
List of Figures........................................................................ ix
1 Introduction ........................................................................ 1
1.1 Overview.............................................................................. 1
1.2 Features............................................................................... 1
1.3 Packing List ......................................................................... 2
1.4 Optional Accessories ........................................................... 3
2 Specifications..................................................................... 5
2.1 DLAP-3200-CF .................................................................... 5
2.2 DLAP-3200-CF Functional Block Diagram .......................... 8
2.3 Display Options.................................................................... 9
2.4 Mechanical Dimensions..................................................... 10
3 System Layout.................................................................. 15
3.1 Front Panel ........................................................................ 15
3.2 Internal I/O Connectors...................................................... 23
4 Getting Started ................................................................. 45
4.1 Installing 2.5” Storage........................................................ 46
4.2 Installing an M.2 Module.................................................... 48
4.3 Installing MXM P1000/P2000/T1000 Module .................... 63
4.4 Installing MXM P3000/P5000/RTX3000/RTX5000 Module 67
4.5 Installing a PCIe x4 Add-on Card ...................................... 73
4.6 Mounting ............................................................................ 81
4.7 Driver Installation ............................................................... 83

vi Table of Contents
A Appendix: Power Consumption .......................................85
A.1 Power Consumption Reference ......................................... 85
B Appendix: Resource Mapping..........................................87
B.1 BIOS Mapping in SPI ROM................................................ 87
B.2 PCI/PCIe Devices .............................................................. 88
B.3 IRQ Lines (APIC Mode) ..................................................... 89
B.4 IRQ Lines (PIC Mode)........................................................ 90
B.5 System Memory Mapping .................................................. 91
B.6 System I/O Mapping .......................................................... 92
B.7 PCI/PCIe Interrupt Routing Mapping ................................. 93
B.8 SMBus Slave Address Mapping ........................................ 94
C Appendix: BIOS Setup.......................................................95
C.1 BIOS Setup Menu .............................................................. 95
C.2 Menu Structure .................................................................. 97
C.3 Main Menu ......................................................................... 99
C.4 Advanced Menu ............................................................... 102
C.5 Chipset............................................................................. 120
C.6 Security ............................................................................ 127
C.7 Boot ................................................................................. 128
C.8 Save & Exit ...................................................................... 129
D Appendix: DisplayPort BIOS Settings ...........................131
D.1 MXM P1000/P2000/T1000/RTX3000/RTX5000 .............. 131
D.2 MXM P3000/P5000.......................................................... 132
E Appendix: Digital Input/Output Function Library .........133
Important Safety Instructions............................................. 135
Consignes de Sécurité Importante.................................... 137
Getting Service.................................................................... 141

List of Tables vii
DLAP-3200-CF
List of Tables
Table 2-1: Maximum Display Resolution ..................................... 9
Table 3-1: I/O Legend................................................................ 17
Table 3-2: Digital Input/Output Connector Pin Definition ........... 19
Table 3-3: Active/Link LED Indicators........................................ 21
Table 3-4: Speed LED Indicators............................................... 21
Table 3-5: D-Sub 9-pin Signal Function of COM Ports.............. 22
Table 3-6: Mainboard Connector Legend .................................. 25
Table 3-7: USB 2.0 Connector Pin Definition ............................ 27
Table 3-8: USB 3.2 Connector Pin Definition ............................ 28
Table 3-9: PCIe Power Connector Pin Definition....................... 29
Table 3-10: SATA Connector Pin Definition ................................ 29
Table 3-11: COM Connector Pin Definition ................................. 30
Table 3-12: CPU/System Fan Connector Pin Definition .............. 31
Table 3-13: GPU Fan Connector Pin Definition........................... 32
Table 3-14: Audio Connector Pin Definition................................. 33
Table 3-15: COM1 RS-232/CCtalk Selection Jumper ................. 34
Table 3-16: Case Open Jumper .................................................. 34
Table 3-17: ME Lock Jumper....................................................... 34
Table 3-18: Clear CMOS Jumper ................................................ 35
Table 3-19: BIOS WP Jumper ..................................................... 35
Table 3-20: Power-on Module Connector Pin Definition.............. 36
Table 3-21: DIO Connector Pin Definition ................................... 37
Table 3-22: 12V DC-in Connector Pin Definition ......................... 38
Table 3-23: PCB Edge Connector Pin Definition ......................... 42
Table 3-24: DB40 Connector Pin Definition................................. 43
Table A-1: DLAP-3200 Power Consumption.............................. 86

viii List of Tables
This page intentionally left blank.

List of Figures ix
DLAP-3200-CF
List of Figures
Figure 2-1: DLAP-3200-CF Functional Block Diagram ...................... 8
Figure 2-2: DLAP-3200-CF Front View ............................................ 10
Figure 2-3: DLAP-3200-CF Left Side View ...................................... 11
Figure 2-4: DLAP-3200-CF Right Side View.................................... 12
Figure 2-5: DLAP-3200-CF Rear View............................................. 13
Figure 2-6: DLAP-3200-CF Top View .............................................. 14
Figure 3-1: DLAP-3200-CF Front Panel I/O..................................... 15
Figure 3-2: DLAP-3200-CF Rear Panel I/O ..................................... 16
Figure 3-3: Power-on Module........................................................... 17
Figure 3-4: Digital I/O Connector Pin Definition ............................... 19
Figure 3-5: Digital Input Circuit......................................................... 20
Figure 3-6: Digital Output Circuit...................................................... 20
Figure 3-7: COM Port Pin Definition................................................. 22
Figure 3-8: Mainboard Connectors (Top)......................................... 23
Figure 3-9: Mainboard Connectors (Rear) ....................................... 24
Figure 3-10: USB 2.0 Connector Pin Definition.................................. 27
Figure 3-11: USB 3.2 Connector Pin Definition.................................. 28
Figure 3-12: PCIe Power Connector Pin Definition............................ 29
Figure 3-13: SATAConnector Pin Definition....................................... 29
Figure 3-14: COM Connector Pin Definition....................................... 30
Figure 3-15: CPU/System Fan Connector Pin Definition ................... 31
Figure 3-16: GPU Fan Connector Pin Definition ................................ 32
Figure 3-17: Audio Connector Pin Definition...................................... 33
Figure 3-18: Multiple I/O Connector Pin Definition............................. 34
Figure 3-19: Power-on Module Connector Pin Definition................... 36
Figure 3-20: DIO Connector Pin Definition......................................... 37
Figure 3-21: 12V DC-in Connector Pin Definition .............................. 38
Figure 3-22: PCB Edge Connector Pin Definition .............................. 39
Figure 3-23: DB40 Connector Pin Definition ...................................... 42

xListofFigures
This page intentionally left blank.

Introduction 1
DLAP-3200-CF
1 Introduction
1.1 Overview
The DLAP-3200-CF series is an optimized computing platform
supporting performance-hungry workloads, such as deep learning,
with expandability options and active cooling for applications
requiring very high levels of computing in a limited space. The
DLAP-3200-CF series is one of the smallest embedded GPU plat-
forms (5.5 liters) with a low TDP reliable MXM GPU design, scal-
able graphics processing ranging from Pascal to Turing GPUs,
and two PCIe Gen3 x4 expansion slots for full height, half length
add-on card support.
1.2 Features
XADLINK MXM Graphics module support (Type A/B/B+, up
to 120W)
X8th/9th Gen Intel® Core™ i7/i5/i3, Celeron® processors
XDual SODIMMs for up to 64GB DDR4 non-ECC memory
(CPU dependent)
X6x DisplayPort (2 from CPU, 4 from MXM)
X1x M.2 E key supporting 1630 or 2230 for Wi-Fi/Bluetooth
module
X1x M.2 B key supporting 2242 or 2280 for SATA storage
module
X1x M.2 M key supporting 2242 or 2280 for SATA/PCIe x4
storage module
XReliable Molex type 12V DC-in connector
X1x Intel® i219-LM and 3x Intel® i210-AT
X2x PCIe Gen3 x4 expansion slot for full height, half length
add on card. Each slot supports 25W power with an addi-
tional Molex 4-pin power cable (12V/1.5A and 5V/2A)

2 Introduction
1.3 Packing List
Before unpacking, check the shipping carton for any damage. If
the shipping carton and/or contents are damaged, inform your
dealer immediately. Retain the shipping carton and packing mate-
rials for inspection. Obtain authorization from your dealer before
returning any product to ADLINK. Ensure that the following items
are included in the package.
X1x DLAP-3200-CF Embedded Computer
XFasteners:
Z3x M3 screws, P-head, L4, Ni for M.2
(P/N: 33-03013-0040)
Z8x M3 screws, F-head, L4, Nylok for 2.5” storage bay
(P/N: 33-03103-1040)
Z2x M3 screws, I-head, L4, Nylok for MXM
(P/N: 33-03306-0040)
NOTE:
NOTE:
If the DLAP-3200-CF does not have a pre-installed MXM
P3000/P5000/RTX3000/RTX5000, the following additional
installation items have been included.
X4x M3 Screw, I-head, L5, Ni (PN: 33-03320-0050)
X4x Washer 5.3 x 10 x 1.0, SUS (PN:33-90086-0000-A0)
X4x Rubber footpad (PN:39-00039-0000)

Introduction 3
DLAP-3200-CF
1.4 Optional Accessories
XCPU cooler (P/N: 32-20495-0000)
XCPU cooler bracket (P/N: 32-50015-0100-A0)
XMXM cooler for P1000/P2000 (P/N: 32-20797-0200-A0)
XMXM cooler for P3000/P5000 (P/N: 32-20823-0020-A0)
XMXM cooler for T1000 (P/N: 32-20830-0200-A0)
XMXM cooler for RTX3000 (P/N: 32-20823-1100-A0)
XMXM cooler for RTX5000 (P/N: 32-20839-1000-A0)
X12V/240W power adaptor (P/N: 31-62164-0010-A0)
XDLAP-3000 AC/DC power supply kit, 500W (12V/41.7A)
(P/N: 91-95296-002E)
X Wall mount bracket set (P/N: 34-34546-0000-A0) (2 required)
XWi-Fi Kit Intel® Wireless-AC 9260 non-vPRO
(P/N: 91-95266-0020)

4 Introduction
This page intentionally left blank.

Specifications 5
DLAP-3200-CF
2 Specifications
2.1 DLAP-3200-CF
Model
DLAP-
3200-
CFP1
DLAP-
3200-
CFP2
DLAP-
3200-
CFT1
DLAP-
3200-
CFT3
DLAP-
3200-
CFT5
DLAP-
3200-
CFP3
DLAP-
3200-
CFP5
DLAP-3200-CFP12* DLAP-3200-CFP35*
MXM
Support
EGX-
MXM-
P1000
EGX-
MXM-
P2000
EGX-
MXM-
T1000
EGX-
MXM-
RTX3000
EGX-
MXM-
RTX5000
EGX-
MXM-
P3000
EGX-
MXM-
P5000
Processor
XIntel® Core™ i7-9700E, 2.6GHz, 12M Cache, 65W TDP, LGA1151, DDR4
2666MHz support (8C/8T)
XIntel® Core™ i7-9700TE, 1.8GHz, 12M Cache, 35W TDP, LGA1151, DDR4
2666MHz support (8C/8T)
XIntel® Core™ i5-9500E, 3.0GHz, 9M Cache, 65W TDP, LGA1151, DDR4
2666MHz support (6C/6T)
XIntel® Core™ i5-9500TE, 2.2GHz, 9M Cache, 35W TDP, LGA1151, DDR4
2666MHz support (6C/6T)
XIntel® Core™ i3-9100E, 3.1GHz, 6M Cache, 65W TDP, LGA1151, DDR4
2400MHz support (4C/4T)
XIntel® Core™ i3-9100TE, 2.2GHz, 6M Cache, 35W TDP, LGA1151, DDR4
2400MHz support (4C/4T)
XIntel® Core™ i7-8700, 3.2GHz, 12M Cache, 65W TDP, LGA1151, DDR4
2666MHz support (6C/12T)
XIntel® Core™ i7-8700T, 2.4GHz 12M Cache, 35W TDP, LGA1151, DDR4
2666MHz support (6C/12T)
XIntel® Core™ i5-8500, 3.0GHz, 9M Cache, 65W TDP, LGA1151, DDR4
2666MHz support (6C/6T)
XIntel® Core™ i5-8500T, 2.1GHz, 9M Cache, 35W TDP, LGA1151, DDR4
2666MHz support (6C/6T)
XIntel® Core™ i3-8100, 3.6GHz, 6M Cache, 65W TDP, LGA1151, DDR4
2400MHz support (4C/4T)
XIntel® Celeron® G4900, 3.1GHz, 2M Cache, 54W TDP, LGA1151, DDR4
2400MHz support (2C/2T)
XIntel® Celeron® G4900T, 2.9GHz, 2M Cache, 35W TDP, LGA1151, DDR4
2400MHz support (2C/2T)
Chipset Intel® Q370 Chipset
Memory Non-ECC DDR4 2666/2400MHz, 2x SODIMM, up to 64GB (CPU dependent)

6 Specifications
I/O Interface
Display 6x DisplayPort (2 from CPU, 4 from MXM)
Ethernet 1x GbE (Intel® i219-LM), 3x GbE (Intel® i210-AT)
Serial Ports 1x RS-232/422/485, 1x RS-232
USB 6x USB 3.2 Gen1 x1 ports, 2x USB 2.0 ports
Audio Mic-in, L/R speaker-out (6W + 6W) (Optional)
M.2
X1x M.2 E key for 1630 or 2230 Wi-Fi/BT module
X1x M.2 B key for 2242 or 2280 SATA storage module
X1x M.2 M key for 2242 or 2280 SATA/PCIe x4 storage module
eSIM Optional
DI/O 1x DI/DO with 4 in, 4 out
TPM 2.0 Yes
Expansion
2x PCIe Gen3 x4 expansion slots for full height, half length add-on card.
Each slot supports 25W power and additional Molex 4-pin power cable
(12V/1.5A and 5V/2A).
Storage
SATA
X2x 2.5" SATA 6Gb/s external drive bays
X2x SATA 6Gb/s signals via M.2 M & B key connectors
XIntel® RST RAID Support
Physical
Dimensions 235 x 182 x 129mm (W x D x H, without foot pads)
Mounting Optional wall-mount bracket
Power Supply
DC Input DC 12V input (Molex DC-in jack)
AC Input XOptional: 240W (12V/20A) AC/DC adapter
XOptional: 500W (12V/41.7A) AC/DC power supply unit
Environmental
Operating
Temperature
0°C to 50°C (W/MXM module except RTX-5000, W/SSD; w/add on card supported
operating temperature is 0°C to 70°C)
0°C to 40°C (W/MXM RTX-5000, W/SSD, w/add on card supported operating
temperature is 0°C to 70°C)
Storage
Temperature -20°C to 70°C
Humidity 5% to 95%, non-condensing
Model
DLAP-
3200-
CFP1
DLAP-
3200-
CFP2
DLAP-
3200-
CFT1
DLAP-
3200-
CFT3
DLAP-
3200-
CFT5
DLAP-
3200-
CFP3
DLAP-
3200-
CFP5
DLAP-3200-CFP12* DLAP-3200-CFP35*

Specifications 7
DLAP-3200-CF
Vibration Operating: 2Grms, 5-500Hz, 3 axes
Package (non operating): 3.44Grms, 10-1000Hz, 3 axes (w/MXM, w/SSD)
Shock Operating and Package (non operating): 30G, 11ms duration,
half-sine (w/MXM, w/SSD)
EMC EN55032/35, EN61000-6-2/-4, CE, FCC Part 15B Class B (w/ 240W adaptor),
Class A (w/ 500W PSU)
Safety UL/cUL and CB
NOTE:
NOTE:
XModels marked with “*” do not include an MXM graphics
module.
XContact your local ADLINK sales representative for MXM
module and related DLAP model longevity.
Model
DLAP-
3200-
CFP1
DLAP-
3200-
CFP2
DLAP-
3200-
CFT1
DLAP-
3200-
CFT3
DLAP-
3200-
CFT5
DLAP-
3200-
CFP3
DLAP-
3200-
CFP5
DLAP-3200-CFP12* DLAP-3200-CFP35*

8 Specifications
2.2 DLAP-3200-CF Functional Block Diagram
Figure 2-1: DLAP-3200-CF Functional Block Diagram
DP CN
CPU FAN
DUAL 24/18bits
Channel A
Channel B
eDP(2-Lanes)
DDI 1 (PORT B) : DP
DDI 2 (PORT C) : DP
DDI 3 (PORT D) : HDMI
PCI Express x16 (GEN3)
SATA
Default
Default
JTAG
SMBUS
GPIO
USB2.0x2
DP CN
PCIex1
S
P339E_EX A R
SUPER I/O
F81866AD-I_FINTEK
SW
PI3DBS12212A_Diodes
A
udio Codec
M.2_E_key CNx1
2230 size (default)
SW
P
I3DBS12212A_Diodes
BOM
Option
LAN3
i210_Intel
LAN2
i210_Intel
RJ45
CN
BOM
Option
SW
P
I3DBS12212A_Diodes
M.2_B_key CNx1
2280 size (default)
LAN4
i210_Intel
DP CN
LVDS CN DP CN
SODIMM 2
DDR4 non-ECC Socket
SODIMM 1
DDR4 non-ECC Socket
LPC bus
MXM3.1 slot
p54
Port A
Port B
Port C
Port D
DP CN
DP CN
HDMI CN
DMI
USB3. Gen1x1 *4 + RJ45
x1 CN *2
22
2
USB3. Gen1x1
USB2.0
LAN
HDA
Line In
Mic In
USB2.0
Speaker Out
USB3. Gen1x1
PCIex1
USB2.0
PCIex1
SATA
USB2.0
PCIex1 *2
USB2.0
A
DM213EA_ADI
UART
UART
System FAN
GPU FAN
BIOS
SPI
M.2_M_key CNx1
2280 size (default)
PCIex4 or SATA
USB3. Gen1x1
2
USB3. Gen1x1*2
2
MIC IN x1 or LINE IN x1,
Speaker out (6W x2)
TPM 2.0
SLB9665_Infineon
DIO 4 bit in
4 bit out
SATA Storage x2
8th/9th Gen Intel®
Core™ Processor
Intel
PCH Q370
Chipset
2* Gen3 PCIe x4
(Optional)
(Optional)
AMP
(Optional)

Specifications 9
DLAP-3200-CF
2.3 Display Options
The DLAP-3200-CF includes six DisplayPort connectors, two Dis-
playPort signals from the CPU and four from MXM. All DisplayPo-
rts support DP++. Use DisplayPort1 (DP 1) to connect a monitor
when booting the system for the first time to properly access the
display settings in the BIOS menu. Refer to Appendix D, Display-
Port BIOS Settings for more information.
Table 2-1: Maximum Display Resolution
Port Resolution
Display Port 1 from CPU DP 1 4096x2304@60Hz
Display Port 2 from CPU DP 2 4096x2304@60Hz
Display Port A from MXM DP A Based on MXM module
Display Port B from MXM DP B Based on MXM module
Display Port C from MXM DP C Based on MXM module
Display Port D from MXM DP D Based on MXM module

10 Specifications
2.4 Mechanical Dimensions
Figure 2-2: DLAP-3200-CF Front View
(including wall-mount brackets and footpads)
NOTE:
NOTE:
All dimensions are in millimeters, unless noted.
235.00
129.00 132.96
235.00
129.00
137.00