ADLINK Technology MIX-220 User manual

Advance Technologies; Automate the World.
Manual Rev.: 2.00
Revision Date: June 4, 2012
Part No: 50-1Z126-1000
MIX-220
Embedded Computer System with
MI-220 Mini-ITX Motherboard
User’s Manual

ii Revision History
Revision History
Revision Release Date Description of Change(s)
2.00 2012/06/04 Initial release

Preface iii
MIX-220
Preface
Copyright 2012 ADLINK Technology Inc.
This document contains proprietary information protected by copy-
right. All rights are reserved. No part of this manual may be repro-
duced by any mechanical, electronic, or other means in any form
without prior written permission of the manufacturer.
Disclaimer
The information in this document is subject to change without prior
notice in order to improve reliability, design, and function and does
not represent a commitment on the part of the manufacturer.
In no event will the manufacturer be liable for direct, indirect, spe-
cial, incidental, or consequential damages arising out of the use or
inability to use the product or documentation, even if advised of
the possibility of such damages.
Environmental Responsibility
ADLINK is committed to fulfill its social responsibility to global
environmental preservation through compliance with the Euro-
pean Union's riction of Hazardous Substances (RoHS) directive
and Waste Electrical and Electronic Equipment (WEEE) directive.
Environmental protection is a top priority for ADLINK. We have
enforced measures to ensure that our products, manufacturing
processes, components, and raw materials have as little impact on
the environment as possible. When products are at their end of
life, our customers are encouraged to dispose of them in accor-
dance with the product disposal and/or recovery programs pre-
scribed by their nation or company.
Trademarks
Product names mentioned herein are used for identification pur-
poses only and may be trademarks and/or registered trademarks
of their respective companies.

iv Preface
Using this Manual
Audience and Scope
The MIX-220 User’s Manual is intended for hardware technicians
and systems operators with knowledge of installing, configuring
and operating embedded single board computers.
Manual Organization
This manual is organized as follows:
Preface: Presents copyright notifications, disclaimers, trade-
marks, and associated information on the proper usage of this
document and its associated product(s).
Chapter 1, Introduction: Introduces the MIX-220, its features,
specifications and mechanical dimensions.
Chapter 2, Getting Started: Presents information on chassis lay-
out, setup and operation of the MIX-220.
Chapter 3, Hardware Information: Provides
information about
fan removal/replacement, connectors and pin assignments
.
Important Safety Instructions: Presents safety instructions all
users must follow for the proper setup, installation and usage of
equipment and/or software.
Getting Service: Contact information for ADLINK’s worldwide
offices.

Preface v
MIX-220
Conventions
Take note of the following conventions used throughout this
manual to make sure that users perform certain tasks and
instructions properly.
NOTE:
NOTE:
Additional information, aids, and tips that help users perform
tasks.
CAUTION:
Information to prevent minor physical injury, component dam-
age, data loss, and/or program corruption when trying to com-
plete a task.
WARNING:
Information to prevent serious physical injury, component
damage, data loss, and/or program corruption when trying to
complete a specific task.

vi Preface
This page intentionally left blank.

vii
MIX-220
Table of Contents
Revision History...................................................................... ii
Preface.................................................................................... iii
List of Figures........................................................................ ix
List of Tables.......................................................................... xi
1 Introduction ........................................................................ 1
1.1 Overview.............................................................................. 1
1.2 Features............................................................................... 2
1.3 Specifications....................................................................... 3
1.4 Mechanical Drawing ............................................................ 5
2 Getting Started ................................................................... 7
2.1 Packing List ......................................................................... 7
2.2 Chassis Layout.................................................................... 8
2.3 Installing the CPU.............................................................. 12
2.4 Installing the CPU Cooler .................................................. 14
2.1 Installing the CPU Cooler .................................................. 14
2.5 System Memory................................................................. 15
2.6 SATA Drive Installation...................................................... 16
2.7 Installing PCIe/PCI Cards.................................................. 20
2.8 Wall Mount Brackets.......................................................... 21
2.9 Powering Up...................................................................... 22
2.10 Driver Installation............................................................... 23
3 Hardware Information...................................................... 25
3.1 Fan Removal and Replacement ........................................ 25
3.2 I/O Connector Pin Definitions ............................................ 28

viii
Important Safety Instructions............................................... 33
Getting Service...................................................................... 35

List of Figures ix
MIX-220
List of Figures
Figure 1-1: MIX-220 Dimensions (without wall mount brackets)........5
Figure 1-2: MIX-220 Dimensions (with wall mount brackets).............6
Figure 2-1: MIX-220 Front/Rear Panel...............................................8
Figure 2-2: MIX-220 Drive Bay and Fan Access................................9

xListofFigures
This page intentionally left blank.

List of Tables xi
MIX-220
List of Tables
Table 1-1: MIX-220 General Specifications......................................4

xii List of Tables
This page intentionally left blank.

Introduction 1
MIX-220
1 Introduction
This chapter will introduce the MIX-220, its features, specifica-
tions, and mechanical layout. For detailed information on the
MI-220 Mini-ITX industrial motherboard, refer to the user manual
downloadable from the ADLINK website:
http://www.adlinktech.com/PD/web/PD_detail.php?cKind=&pid=1014
1.1 Overview
The MIX-220 is an embedded computer system based on the
MI-220 Mini-ITX form factor industrial motherboard supporting
32nm process quad/dual-core Intel® Core™ i7/i5/i3 and Celeron®
processors, Intel® QM67 Express chipset and Dual Channel
DDR3 1066/1333MHz (up to 8GB) in two SODIMM slots. Features
include integrated Intel® HD Graphics (VGA, DVI-D, HDMI out-
puts), dual Gigabit Ethernet, six USB 2.0 ports, four serial ports
(1x RS-232/422/485, 3x RS-232), and an externally accessible
anti-shock drive bay for two 2.5” SATA 6Gb/s drives.
The MIX-220 provides a PCIe x16 slot and PCI slot with card
holder for add-on cards up to 190mm in length, and a PCI Express
Mini Card slot for SSD or Wi-Fi module. Active cooling is provided
by dual 6cm fans with air filters that are easily accessible for
cleaning or replacement, and wall mount brackets allow for flexible
installation.

2Introduction
1.2 Features
XEmbedded computer system (330 mm x 212 mm x 88 mm)
XSupports Intel® Core™ i7/i5/i3 and Celeron® processors,
rPGA988B package in Socket G2
XIntegrated Intel® HD Graphics with VGA, DVI-D, HDMI out-
puts (features dependent on CPU model)
X2x GbE (Intel® 82579LM, 82574L controllers)
X6x USB 2.0 ports (2x front, 4x rear)
XAnti-shock drive bay for two 2.5” SATA 6Gb/s drives
XFour serial ports (1x RS-233/422/485, 3x RS-233)
XPCIe x16 slot, PCI slot, PCI Express Mini Card slot
XHD audio with Mic, Line In, Line Out
XDual 6cm fans with air filters
X250W FlexATX AC power supply
XWall mount brackets
XMounting point for Wi-Fi antenna
XRoHS compliant

Introduction 3
MIX-220
1.3 Specifications
System
CPU • Intel® Core™ i7-2710QE, 2.1GHz, 6M L2 Cache, 32nm,
45W TDP
• Intel® Core™ i5-2510E, 2.5GHz, 3M L2 Cache, 32nm,
35W TDP
• Intel® Core™ i3-2330E, 2.2GHz, 3M L2 Cache, 32nm,
35W TDP
• Intel® Celeron® B810, 1.6GHz, 2M L2 Cache, 32nm,
35W TDP
Chipset • Intel® QM67 Express Chipset
Memory • Dual-Channel DDR3 1066/1333MHz, 2x 204-pin
SO-DIMM sockets, up to 8GB
BIOS • AMI BIOS with 32 Mb SPI flash memory
Graphics • Integrated Intel® HD Graphics (features dependent on
CPU model)
Ethernet • 2x GbE (Intel® 82579LM, 82574L controllers)
• Wake on LAN supported
Audio • Realtek ALC892 HD audio
Watchdog Timer • 1-255 second/minute programmable
Hardware Monitor • CPU temperature and supply voltages
Operating System • Windows XP/7 32/64-bit, Fedora 14,
Red Hat Enterprise Linux 5
I/O Interfaces
Front I/O • 2x USB 2.0 ports
Rear I/O • 2x RJ-45 LAN ports
• 4x USB 2.0 ports
• 1x DB-15 VGA connector
• 1x DVI-I connector (DVI-D signals only)
• 1x HDMI type A connector,
• 4x serial port connectors
• 3.5mm jacks for line-in, line-out and mic-in
• 1x PCI expansion slot
• 1x PCIe expansion slot
LEDs/Switches • Power, HDD (drive activity)
• On/Off button
• Reset button (recessed)

4Introduction
Table 1-1: MIX-220 General Specifications
Power Requirements
Input • 100-240 VAC universal
Mode •ATXpower
Mechanical and Environment
Dimensions • 330 mm x 212 mm x 88 mm (W x D x H)
Operating Temp. • 0°C to 50°C
Storage Temp. • -20ºC to 75ºC
Rel. Humidity • 10% to 90%, non-condensing
Certifications • CE, FCC Class A

Introduction 5
MIX-220
1.4 Mechanical Drawing
Figure 1-1: MIX-220 Dimensions (without wall mount brackets)
Dimensions in mm
233.2
221.2
87.2 93.6
330
Rear View
Top View
Le View Right View
Front View

6Introduction
Figure 1-2: MIX-220 Dimensions (with wall mount brackets)
Dimensions in mm
140
87.2 92.2
330
360
380
233.2
221.2
180
Rear View
Top View
Le View Right View
Front View

Getting Started 7
MIX-220
2 Getting Started
The following chapter describes how to set up the MIX-220.
2.1 Packing List
Unpack the contents of the shipping carton. Please check that
your package contains the items below. If you discover damaged
or missing items, please contact your vendor.
ZMIX-220 Embedded Computer System
ZAccessory kit: drive bay mounting hardware, wall mount
brackets, AC power cord (US)
ZDriver CD
ZMI-220 Motherboard Quick Reference Guide
WARNING:
DO NOT install or apply power to equipment that is damaged
or if there is missing/incomplete equipment. Retain the ship-
ping carton and packing materials for inspection. Please con-
tact your ADLINK dealer/vendor immediately for assistance.
Obtain authorization from your dealer before returning any
product to ADLINK.
CAUTION:
To prevent damage to the system, ensure there is sufficient
clearance around the air vents for unrestricted airflow. The air
temperature inside the enclosure could rise above the speci-
fied operating temperature limits if the airflow through the vents
is restricted.

8 Getting Started
2.2 Chassis Layout
Front and Rear Panels
Connect the desired peripheral devices (e.g. monitor, key-
board, mouse, LAN) to the system. Refer to Figure 2-1 below
for connector locations.
Figure 2-1: MIX-220 Front/Rear Panel
HDD/Power LEDs
On/Off
Switch
Reset
Front Panel
USB
Rear Panel
USB/LAN
HDMI
VGADVI
PCIe slot PCI slot
COM1/2 COM3/4
AC in