ADT Home Assure User manual

PERS
A smart emergency response
device with Intelligent Voice
Activation™
Call out
'Emergency Call
Emergency Call'
Press
Emergency Call Pull the cord out
In an emergency
SOS
OR OR
Home Assure
Voice Panic Detector (VPD)
Getting Started

Open the VPD device
Move the VPD at least 2 m (6.5 ft.)
from the control panel
Insert the batteries and wait for
the control panel to beep
Press the Pairing button on
the Control Panel
Close the VPD
Installing the VPD
1
34
2
5
Pairing
Button
Control Panel
Tamper
pin
Tamper
switch
2 m (6.5 ft.)
Control Panel VPD
Hold here and
pull off the
back cover

On a wall
Call ADT on 1300 364 666 to test the VPD.
Place in a convenient place,
like a living room table or
bedroom night stand.
Clean and dry the surface
Peel the strips off the
mounting tape and press
the VPD into place
Remove desk
mount
Insert the
cord
On a table
1
1
3
2
4

ADT MASTER LICENCES
NSW No. 406336543 VIC No. 652-156-12S, 652-156-91S WA No. SA61998 SA No. ISL 149773 ACT No. 17501831 QLD No. 40506
LED
Speaker
Emergency button
Pull cord
Power supply
connector
Microphone
Wall Installation
Table Installation
For more information, see:
www.adtsecurity.com.au/home-assure
Phone 1 31 005