Advantech MIO-2263 Installation and operation manual

MIO-2263 Startup Manual 1
Before you begin installing your card, please make sure that
the following items have been shipped:
1. 1 MIO-2263 SBC
2. 1 Startup Manual
3. 1 SATA cable p/n: 1700006291
4. 1 Audio cable p/n: 1700022444-01
5. 1 COM cable p/n: 1701200220
6. 1 SATA Power cable p/n: 1700019656
7. 1 USB cable p/n: 1700002172
8. AT power cable p/n : 1700019705
9. 1 Heatsink p/n: 1960063455T001
10. Screw and stud pack (2 screws
for Mini PCIe, 4 M3 studs and
screws for heatsink) p/n: 9666226300E
If any of these items are missing or damaged, please con-
tact your distributor or sales representative immediately.
Note 1: For detailed contents of MIO-2263, please refer
to Advantech website for detailed information.
Note 2: Acrobat Reader is required to view any PDF
file. Acrobat Reader can be downloaded at:
http://get.adobe.com/reader/ (Acrobat is a trade-
mark of Adobe)
Note 3: Default BIOS is supported for 64 bit OS installa-
tion, BIOS for 32 bit OS is supported by project,
please contact with sales representative for
details.
MIO-2263 Intel®AtomTM SoC J1900/ E3825 Pico-ITX
SBC, DDR3L, 18/24-bit LVDS, VGA or HDMI, 1 GbE,
Half-size Mini PCIe, 4 USB, 2 COM, SMBus,
mSATA & MIOe
Startup Manual
General
• CPU: Intel®Atom™ SoC Quad core J1900 2.0 GHz/ Dual
core E3825 1.33 GHz
• System Memory: 1 x 204-pin SODIMM socket DDR3L
1333 MHz (J1900) / 1066 MHz (E3825), up to 8 GB
• L2 Cache: 2 MB (J1900) / 1 MB (E3825)
• BIOS: AMI EFI 64 Mbit Flash ROM
• Watchdog Timer: 255 level interval timer
Battery: Lithium 3 V/210 mAH
Note: How to clear CMOS (Must follow steps below):
1. Turn off system power.
2. Unplug CR2032 battery cable on BH1.
3. Waiting for 15 sec or short BH1 pin1-2.
4. Connect battery cable on BH1.
5. Turn on system power.
• Serial ATA: Two SATA II interface, one supports 2.5” HDD
and another for mSATA devices, up to 300 MB/s
• USB: One USB 3.0 and three USB 2.0 ports
• Audio: High definition audio (HD), line-in, line-out
• GPIO: 8-bit general purpose input/output
• Expansion Interface: Half size Mini PCIe
MIOe Expansion Slot
• Interface: 2 x USB 2.0, 2 x PCIe x1, LPC, HD Audio
line-out, SMBus, DP or HDMI supported by request, 5
Vsb/12 Vsb
• Total peripheral power supply output: 5 V @ 3 A for
CPU board and MI/O Extension module totally, 12 V @ 2
A for MI/O Extension module
VGA/HDMI Interface
• Controller: Intel®SoC J1900 / E3825, DirectX 11 and
OpenGL3.0 support for VGA and HDMI display output
Chrontel CH7511 for 18/24 bit LVDS display output
• Output Interfaces:
- VGA: Up to 1920 x 1200
- HDMI: 1920 x 1080
- LVDS: Single channel 18/24-bit LVDS,
up to 1440 x 900
- Dual Display: VGA + LVDS or HDMI + LVDS
Ethernet Interface
• Supports single 10/100/1000 Mbps Ethernet interface
• Controller: Intel® i210
Specications
Packing List
For more information on this and other Advantech
products, please visit our website at:
http://www.advantech.com
http://www.advantech.com/eplatform
For technical support and service, please visit our
support website at:
http://service.advantech.com.tw/support/
This manual is for the MIO-2263 Series Rev. A1
Part No. 2006226301
Printed in China
2nd Edition
August 2014
All manuals and user guides at all-guides.com
all-guides.com

2 MIO-2263 Startup Manual
Mechanical and Environmental
• Dimensions: 100 x 72 mm (3.9” x 2.8”)
Mechanical Drawings are on page 4 - 6.
• Power Requirement: Single 12 V DC power input
• Power Consumption (with 8 GB memory):
- Typical in Window 8:
J1900: 0.86 A @ 12 V (10.59 W)
E3825: 0.59 A @12 V (7.08 W)
- Max in HCT:
J1900: 1.04 A @ 12 V (12.48 W)
E3825: 0.76 A @12 V (9.12 W)
• Operating Temperature: 0 ~ 60° C (32 ~ 140° F)
• Weight: 0.42 kg (0.93 lb) (reference total weight)
The board has a number of jumpers that allow you to con-
figure your system to suit your application. The table below
lists the function of each of the jumpers and connectors.
Jumpers
Label Function
J1
LCD Power / Auto Power on
Connectors
Label Function
CN1 12V Power Input
CN2 DC JACK (support by request)
CN3 12 V Power Input (2 x 3 pin support by
request)
CN6 DDR3L SO-DIMM
CN9 GPIO
CN11 VGA
CN12 HDMI
CN13 Front Panel
CN14 S ATA
CN15 m S ATA
CN16 Mini PCIe
CN18 Internal USB
CN19 External USB3.0 + USB2.0
CN20 COM1/ COM2
CN24 Gigabit Ethernet
CN27 HD Audio
CN29 MIOe
CN30 Inverter Power/Internal SATA Power
Jumpers and Connectors
Jumpers and Connectors
Specications Cont.
CN31 18/24 bits LVDS Panel
CN33 SMBus
BH1 Battery
Jumper Settings
J1
LCD Power / Auto Power On
Part Number 1653003260
Footprint
HD_3x2P_79
Description PIN HEADER 3*2P 180D(M) 2.0 mm
SMD 21N22050
Setting
Function
(1-2) +5 V
(3-4)* +3.3 V
(5-6)* Auto Power On
* default
Caution! The computer is provided with a battery-powered
real-time clock circuit. There is a danger of explo
sion if battery is incorrectly replaced. Replace
only with same or equivalent type recommended
by the manufacturer. Discard used batteries ac-
cording to manufacturer’s instructions.
All manuals and user guides at all-guides.com

CN11
CNCN
CN31
CN13CN
CN13
CN6
CN14
CN29
MIO-2263 Startup Manual 3
MIO-2263 Connector Locations
Figure 1: MIO-2263 Connecter Location (Top Side)
Figure 2: MIO-2263 Connecter Location (Bottom Side)
CN27
CN20
CN15CN9CN18CN33CN30
J1
CN16
CN11 CN19 CN24
CN1
BH1
All manuals and user guides at all-guides.com

Unit: mm
Unit: mm
4 MIO-2263 Startup Manual
Figure 3: MIO-2263 Mechanical Drawing (Top Side)
Figure 4: MIO-2263 Mechanical Drawing (Bottom Side)
MIO-2263 Mechanical Drawing
0
3.25
4.35
22.40
31.10
64.18
83.49
96.73
0
3.25
10.87
10.92
15.62
62.16
68.75
72
0
3.25
37.12
42.91
53.84
70.94
83.81
92.57
0
3.25
3.63
6.83
27.86
34.55
69.60
0
3.27
41.91
96.75
100
0
3.25
29.41
57.70
68.75
72
0
3.25
26.83
34.10
45.35
68.75
0
3.25
5.06
14.58
96.75
All manuals and user guides at all-guides.com

MIO-2263 Startup Manual 5
Unit: mm
Figure 5: MIO-2263 Mechanical Drawing (Side View)
Unit: mm
Figure 6: MIO-2263 Mechanical Drawing (Side View with Optional DC/Jack)
MIO-2263 Mechanical Drawing
40.56
65.40
83.31
16.51
6.35
46.23
8.38
100
16.34
4.28
10.99
104.36
3.20
40.56
65.40
83.31
6.35
8.38
46.23
100
16.34
4.28
104.36
3.20
10.99
17.27
6.55
All manuals and user guides at all-guides.com

6 MIO-2263 Startup Manual
Unit: mm
Figure 7: MIO-2263 Mechanical Drawing (Side vew with Heatsink)
Unit: mm
Figure 8: MIO-2263 Mechanical Drawing (Side View with Optional Heatspreader)
MIO-2263 Mechanical Drawing
40.56
65.40
83.31
6.35
8.38
16.51
100
16.34
4.28
104.36
3.20
17.29
40.56
65.40
83.31
6.35
8.38
16.51
100
16.34
4.28
104.36
3.20
12.79
All manuals and user guides at all-guides.com
all-guides.com

Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Advantech:
MIO-2263JH-U0A1E MIO-2263EZ-2GS3A1E MIO-2263EZ22GS3A1E
All manuals and user guides at all-guides.com