Advantech AMAX-5570 User manual

User Manual
AMAX-5570 Industrial PC
Ultra Compact Control Platform with
Intel Atom Processor, 64GB eMMC,
2 x LAN, 2 x USB, 2 x CAN, 2 x COM,
and Slice IO expansion

ii
AMAX-5570 User Manual
Copyright
The documentation and the software included with this product are copyrighted 2023
by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right
to make improvements in the products described in this manual at any time without
notice. No part of this manual may be reproduced, copied, translated or transmitted
in any form or by any means without the prior written permission of Advantech Co.,
Ltd. Information provided in this manual is intended to be accurate and reliable. How-
ever, Advantech Co., Ltd. assumes no responsibility for its use, nor for any infringe-
ments of the rights of third parties, which may result from its use.
Acknowledgments
AMI is a trademark of American Megatrends Inc.
IBM and PC are trademarks of International Business Machines Cor-poration.
Intel® , Core™ andAtom™are the trademarks of Intel® Corporation
Microsoft Windows and MS-DOS are registered trademarks of Microsoft Corp.
All other product names or trademarks are properties of their respective owners.
Support
For more information on this and other Advantech products, please visit our website
at http://www.advantech.com/
For technical support services, please visit our support website at
http://support.advantech.com/
This manual applies to the AMAX-5570 related models. Below list are general
abbreviated as AMAX-5570 expanded products especially for BSMI certificate in TW,
others extended product number like CTOS PN also included in this article.
*Model name
AMAX-5570
*Part number:
AMAX-5570
AMAX-5570-E2200A
AMAX-5570-E2300A
AMAX5570E22301-T
AMAX5570E22401-T
AMAX5570E22501-T
AMAX5570E22302-T
AMAX5570E22402-T
AMAX5570E22502-T
AMAX5570E22303-T
AMAX5570E22403-T
AMAX5570E22503-T
AMAX5570E22304-T
AMAX5570E22404-T
AMAX5570E22504-T
AMAX5570E22305-T
AMAX5570E22405-T
AMAX5570E22505-T
AMAX5570E22306-T
AMAX5570E22406-T
AMAX5570E22506-T
AMAX5570E22307-T
AMAX5570E22407-T
AMAX5570E22507-T
AMAX5570E22308-T
AMAX5570E22408-T
AMAX5570E22508-T
AMAX5570E22309-T
AMAX5570E22409-T
AMAX5570E22509-T
AMAX5570E222601-T
AMAX5570E222701-T
AMAX5570E232301-T
AMAX5570E222602-T
AMAX5570E222702-T
AMAX5570E232302-T
AMAX5570E222603-T
AMAX5570E222703-T
AMAX5570E232303-T
AMAX5570E222604-T
AMAX5570E222704-T
AMAX5570E232304-T
AMAX5570E222605-T
AMAX5570E222705-T
AMAX5570E232305-T
AMAX5570E222606-T
AMAX5570E222706-T
AMAX5570E232306-T

iii
AMAX-5570 User Manual
AMAX5570E222607-T
AMAX5570E222707-T
AMAX5570E232307-T
AMAX5570E222608-T
AMAX5570E222708-T
AMAX5570E232308-T
AMAX5570E222609-T
AMAX5570E222709-T
AMAX5570E232309-T
AMAX5570E232401-T
AMAX5570E232501-T
AMAX5570E232601-T
AMAX5570E232402-T
AMAX5570E232502-T
AMAX5570E232602-T
AMAX5570E232403-T
AMAX5570E232503-T
AMAX5570E232603-T
AMAX5570E232404-T
AMAX5570E232504-T
AMAX5570E232604-T
AMAX5570E232405-T
AMAX5570E232505-T
AMAX5570E232605-T
AMAX5570E232406-T
AMAX5570E232506-T
AMAX5570E232606-T
AMAX5570E232407-T
AMAX5570E232507-T
AMAX5570E232607-T
AMAX5570E232408-T
AMAX5570E232508-T
AMAX5570E232608-T
AMAX5570E232409-T
AMAX5570E232509-T
AMAX5570E232609-T
AMAX5570E232701-T
AMAX5570E232702-T
AMAX5570E232703-T
AMAX5570E232704-T
AMAX5570E232705-T
AMAX5570E232706-T
AMAX5570E232707-T
AMAX5570E232708-T
AMAX5570E232709-T
Part No. Edition 1
Printed in Taiwan August 2023

iv
AMAX-5570 User Manual
RoHS
限用物質含有情況標示聲明書
Declaration of the Presence Condition of the Restricted Substances Marking

v
AMAX-5570 User Manual
Product Warranty (2 years)
Advantech warrants to you, the original purchaser, that each of its products will be
free from defects in materials and workmanship for two years from the date of pur-
chase.
This warranty does not apply to any products which have been repaired or altered by
persons other than repair personnel authorized by Advantech, or which have been
subject to misuse, abuse, accident or improper installation. Advantech assumes no
liability under the terms of this warranty as a consequence of such events.
Because of Advantech’s high quality-control standards and rigorous testing, most of
our customers never need to use our repair service. If an Advantech product is defec-
tive, it will be repaired or replaced at no charge during the warranty period. For out-
of-warranty repairs, you will be billed according to the cost of replacement materials,
service time and freight. Please consult your dealer for more details.
If you think you have a defective product, follow these steps:
1. Collect all the information about the problem encountered. (For example, CPU
speed,Advantech products used, other hardware and software used, etc.) Note
anything abnormal and list any onscreen messages you get when the problem
occurs.
2. Call your dealer and describe the problem. Please have your manual, product,
and any helpful information readily available.
3. If your product is diagnosed as defective, obtain an RMA (return merchandize
authorization) number from your dealer. This allows us to process your return
more quickly.
4. Carefully pack the defective product, a fully-completed Repair andReplacement
Order Card and a photocopy proof of purchase date (such as your salesreceipt)
in a shippable container. A product returned without proof of the purchase date
is not eligible for warranty service.
5. Write the RMA number visibly on the outside of the package and ship it prepaid
to your dealer.
Declaration of Conformity
CE
This product has passed the CE test for environmental specifications when shielded
cables are used for external wiring. We recommend the use of shielded cables. This
kind of cable is available from Advantech. Please contact your local supplier for
ordering information.

vi
AMAX-5570 User Manual
FCC Class A
Note: This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Opera-
tion of this equipment in a residential area is likely to cause harmful interference in
which case the user will be required to correct the interference at his own expense.
甲類資訊技術設備
甲類設備為其他符合甲類設備限制值之資訊技術設備，而非符合乙類資訊技術設備的
限制值；雖然不可限制此類設備之行銷，但使用場所必須被限制，不得進行居住的環
境中，且應於其機器本體及使用說明書中含有下列警語:
**CNS 15936甲類警語：為避免電磁干擾，本產品不應安裝或使用於住宅環境。
Technical Support and Assistance
1. Visit the Advantech web site at www.advantech.com/support where you can find
the latest information about the product.
2. Contact your distributor, sales representative, or Advantech's customer service
center for technical support if you need additional assistance. Please have the
following information ready before you call:
–Product name and serial number
–Description of your peripheral attachments
–Description of your software (operating system, version, applicationsoftware,
etc.)
–A complete description of the problem
–The exact wording of any error messages
Safety Precaution - Static Electricity
Follow these simple precautions to protect yourself from harm and the products from
damage.
◼To avoid electric shock, always disconnect the power from your PC chassis
before you work on it. Don't touch any components on the CPU card or other
cards while the PC is on.
◼Disconnect power before making any configuration changes. The sudden rush
of power as you connect a jumper or install a card may damage sensitive elec-
tronic components.
Safety Instructions
1. Read these safety instructions carefully.
2. Keep this User Manual for later reference.
3. Disconnect this equipment from anyAC outlet before cleaning. Use a damp
cloth. Do not use liquid or spray detergents for cleaning.
4. For plug-in equipment, the power outlet socket must be located near the equip-
ment and must be easily accessible.
5. Keep this equipment away from humidity.
6. Put this equipment on a reliable surface during installation. Dropping it or lettingit

vii
AMAX-5570 User Manual
fall may cause damage.
7. The openings on the enclosure are for air convection. Protect the equipment
from overheating. DO NOT COVER THE OPENINGS.
8. Make sure the voltage of the power source is correct before connecting the
equipment to the power outlet.
9. Position the power cord so that people cannot step on it. Do not place anything
over the power cord.
10. All cautions and warnings on the equipment should be noted.
11. If the equipment is not used for a long time, disconnect it from the power source
to avoid damage by transient over-voltage.
12. Never pour any liquid into an opening. This may cause fire or electrical shock.
13. Never open the equipment. For safety reasons, the equipment should be
opened only by qualified service personnel.
14. If one of the following situations arises, get the equipment checked by service
personnel:
◼The power cord or plug is damaged
◼Liquid has penetrated into the equipment
◼The equipment has been exposed to moisture
◼The equipment does not work well, or you cannot get it to work according to
the user's manual
◼The equipment has been dropped and damaged
◼The equipment has obvious signs of breakage
15. DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT WHERE THE
STORAGETEMPERATURE MAYGO BELOW -20°C (-4 °F) ORABOVE 60 °C
(140 °F). THIS COULD DAMAGE THE EQUIPMENT. THE EQUIPMENT
SHOULD BE IN ACONTROLLED ENVIRONMENT.
16. CAUTION: DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY
REPLACED. REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE
RECOMMENDED BYTHE MANUFACTURER, DISCARD USED BATTERIES
ACCORDING TO THE MANUFACTURER'S INSTRUCTIONS.
17. The sound pressure level at the operator's position according to IEC 704-1:1982
is no more than 70 dB (A).
18. This product is intended to be supplied by an UL certified power supply or dc
source with SELV output, rated 24 Vdc, 3A minimum and Tmax 60 degree. If
you need further assistance, please contactAdvantech for further information.
19. Ensure that the voltage of the power source is correct before connecting the
equipment to a power outlet. The power outlet socket should have a grounded
connection.
20. For use in pollution free environments and indoor use.
21. This equipment is not suitable for use in locations where children are likely to be
present.
22. If the equipment is used in a manner not specified by the Advantech, the protec-
tion provided by the equipment may be impaired.
23. The equipment contains no user-serviceable parts. Do not open, Return to man-
ufacturer for servicing.
24. Do not block air ventilation holes.
25. This is open type equipment and should be installed in a suitable enclosure.
DISCLAIMER: This set of instructions is given according to IEC 704-1. Advantech
disclaims all responsibility for the accuracy of any statements contained herein.

vi
UNO-127 User Manual
Consignes de sécurité
1. Lire attentivement les instructions de sécurité.
2. Conserver ce manuel pour utilisation ultérieure,
3. Débranchez cet équipement de toute prise secteur avant le nettoyer. Utilisez
seulement un chiffon humide. N'utilisez pas de détergent liquide ou pulvérisépour
le nettoyage.
4. Gardez cet équipement à l'abri de l'humidité.
5. Placez cet équipement sur une surface fiable pendant l'installation. Le faire oubien
le laisser tomber peut causer des dégâts.
6. Les ouvertures sur l'enceinte servent à la convection de l'air. Protégez l'équipe-ment
contre surchauffe. NE COUVREZ PAS LES OUVERTURES.
7. Assurez-vous que la tension de la source d'alimentation est correcte avant de
connecter l'équipement à une prise de courant. La prise de courant doit avoir une
connexion à la terre.
8. Placezle câble d'alimentation de manière à ce que personne ne puisse marcher
dessus. Ne placez rien sur le câble d'alimentation.
9. Toutes les mises en garde et tous les avertissements sur l'équipement doiventêtre
notés.
10. Si l'équipement n'est pas utilisé pendant une longue période, débranchez-le dela
source d'alimentation pour éviter tout endommagement dû à une surtension
transitoire.
11. Ne jamais verser de liquide dans une ouverture. Cela pourrait provoquer un
incendie ou un choc électrique.
12. N'ouvrez jamais l'équipement. Pour des raisons de sécurité, l'équipement doitêtre
ouvert uniquement par du personnel qualifié.
13. Si l'une des situations suivantes se présente, faites vérifier l'équipement par le
personnel de service:
◼un liquide a pénétré dans l'équipment
◼L'équipement a été exposé à l'humidité.
◼L'équipement ne fonctionne pas bien, ou vous ne pouvez pas le faire
fonctionner selon le manuel de l'utilisateur.
◼The equipment does not work well, or you cannot get it to work according to
the user's manual
◼L'équipement est tombé et endommagé
◼L'équipement présente des signes évidents de rupture.
14. NE LAISSEZ PAS CET ÉQUIPEMENT DANS UN ENVIRONNEMENT OU LA
TEMPÉRATURE DE STOCKAGE PEUT ÊTRE INFÉRIEURE À -20 °C (-4 °F)OU
BIEN SUPÉRIEURE À 60 °C (140 °F). CECI POURRAIT ENDOMMAGER
L'EQUIPEMENT. L'ÉQUIPEMENT DEVRAIT ÊTRE DANS UN ENVIRONNE-
MENT CONTRÔ LÉ.
15. Ce produit est destiné à être alimenté par une source d'alimentation certifiée ULou
par une source cc convenant à une utilisation à une température minimale de 60
degrés Celsius, dont la sortie est conforme à la norme SELV et dont la puissance
nominale est de 24 Vdc, 3 A, en cas de besoin. contactez Advant-ech pour plus
d'informations.
16. Pour une utilisation dans des environnements non polluant et à l'intérieur.
17. C'est appareil ne doit pas être utilisé dans des endroits où se trouvent des
enfants.
18. Si l'équipement est utilisé d'une manière non spécifiée par le fabricant, la pro-
tection fournie par l'équipement peut être altéré

vii
UNO-127 User Manual
19. L'équipement ne contient aucune pièce réparable par l'utilisateur. Ne pas ouvrir,
retourner au fabricant pour réparation.
20. Ne bloquez pas les ou es de ventilation.
21. Il s'agit d'un équipement de type ouvert et doit être installé dans un boîtier
approprié
ATTENTION: Danger d'explosion si la batterie est mal remplace. Remplacer unique-
ment par le meme type ou equivalent recommandé par le fabricant. Jeter les piles
usagées selon les instructions du fabricant.
安全指示
1. 請仔細閱讀此安全操作說明。
2. 請妥善保存此用戶手冊供日後參考。
3. 用濕抹布清洗設備前，請確認拔除電源線。請勿使用液體或去污噴霧劑清洗設
備。
4. 對於使用電源線的設備，設備周圍必須有容易接觸到的電源插座。
5. 請勿在潮濕環境中試用設備。
6. 請在安裝前確保設備放置在可靠的平面上，意外摔落可能會導致設備損壞。
7. 設備機殼的開孔適用於空氣對，從而防止設備過熱。請勿覆蓋開孔。
8. 當您連接設備到電源插座前，請確認電源插座的電壓符合要求。
9. 請將電源線佈置在人們不易絆倒的位置，請勿在電源線上覆蓋任何雜物。
10. 請注意設備上所有的警告標示。
11. 如果長時間不使用設備，請拔除與電源插座的連結，避免設備被超標的電壓波動
損壞。
12. 請勿讓任何液體流入通風口，以免引起火灾或短路。
13. 請勿自行打開設備。為了確保您的安全，請透過經認證的工程師來打開設備。
14. 如遇下列情况，請由專業人員維修：
◼電源線或插頭損壞；
◼設備內部有液體流入；
◼設備曾暴露在過度潮濕環境中使用；
◼設備無法正常工作，或您無法透過用戶手冊來正常工作；
◼設備摔落或損壞；
◼設備有明顯外觀損；
15. 請勿將設備放置在超出建議溫度範圍的環境，即不要低於 -20 ℃（-4 ℉）或高
於60 ℃（140 ℉），否則可能會造成設備損壞。
16. 注意：若電池更換不正確，將有爆炸危險。因此，只可以使用製造商推薦的同一
種或者同等型號的電池進行替換。請按照製造商的指示處理舊電池。
17. 根據 IEC 704‐1:1982 規定，操作員所在位置音量不可高於 70 分貝。
18. 限制區域：請勿將設備安裝於限制區域使用。
19. 免責聲明：請安全訓示符合 IEC 704‐1 要求。研華公司對其內容之準確性不承擔
任何法律責任。
20. 消费者若使用电源适配器供电，则应购买配套使用获得 CCC 认证并满足标准要
求的电源适配器。

viii
UNO-127 User Manual
Contents
Chapter 1 Overview..............................................1
1.1 Introduction................................................................................................ 2
1.2 Safety Precautions .................................................................................... 2
1.3 Packing List ............................................................................................... 3
1.4 Hardware Specifications............................................................................ 3
1.4.1 General.......................................................................................... 3
1.4.2 System Hardware.......................................................................... 4
1.4.3 I/O Interfaces................................................................................. 4
1.4.4 Environment.................................................................................. 4
1.4.5 Certifications.................................................................................. 5
1.5 Dimensions................................................................................................ 6
Figure 1.1 AMAX-5570 Dimensions............................................. 6
Chapter 2 Hardware Functionality ......................7
2.1 Introduction................................................................................................ 8
Figure 2.1 Diagram of Board Component Locations on Mother
Board(Top Side) ......................................................... 8
Figure 2.2 Diagram of Board Component Locations on Mother
Board (Bottom Side)................................................... 8
Table 2.1: Key components, Connectors on Mother Board...........9
Figure 2.3 Diagram of Board Component Locations on Daughter
Board(Top Side).............................................................10
Figure 2.4 Diagram of Board Component Locations on Daughter
Board(Bottom side)...................................................... 10
2.2 External I/O Connector............................................................................ 10
2.2.1 AMAX-5570 Based Unit.............................................................. 11
2.2.2 Power Connector......................................................................... 11
2.2.3 LAN: Ethernet Connector............................................................ 11
2.2.4 USB Connector ........................................................................... 11
2.2.5 Display Connector....................................................................... 11
2.2.6 CAN bus and Serial port Connector……………………………….12
2.3 Internal I/O Connectors and Switches..................................................... 15
Figure 2.8 Locations Internal I/O Connectors/Switches.............. 15
Table 2.3: Internal Connectors and Jumper Switches............... 15
2.3.1 M.2 Connector............................................................................. 16
2.3.2 mPCIe Connector........................................................................ 16
2.3.3 Nano SIM Slot ............................................................................. 16
2.4 Others...................................................................................................... 17
Figure 2.9 LED Indicators, Reset Buttons, and Antenna Hole... 17
2.4.1 LED Indicators............................................................................. 17
2.4.2 Reset Buttons.............................................................................. 17
Figure 2.10 Diagram of Maximum OD Value for Antenna Hole.. 18
Chapter 3 Initial Setup........................................19
3.1 Chassis Grounding...................................................................................20
Figure 3.1 Chassis Grounding Connection Diagram..................20
3.2 Connecting Power....................................................................................20

ix
UNO-127 User Manual
3.3 Storage Installation (optional) ..................................................................21
3.4 Wireless Module Installation (Optional) ...................................................26
3.5 Extension Kit Installation (Optional).........................................................30
3.6 Reset Settings..........................................................................................34
Table 3.1: Reset Settings...........................................................34
3.7 BIOS Setting.............................................................................................34
Appendix A System Settings/Pin Assignments.. 35
A.1 Power Connector (DCIN1) .......................................................................36
Table A.1: Power Connector Pin Assignments...........................36
A.2 LAN: Ethernet Connector (LAN1).............................................................36
Table A.2: Ethernet Connector Pin Assignments .......................36
A.3 USB Connector (USB1) ...........................................................................37
A.3.1 USB 3.0 Connector......................................................................37
Table A.3: USB 3.0 Connector Pin Assignments........................37
A.4 Display Connector (CN1) .........................................................................38
Table A.4: HDMI Adapter cable Pin Assignments .......................38
A.5 M.2 Connector .........................................................................................40
Table A.5: M.2 B Key Connector Pin Assignments ....................40
A.6 mPCIe Connector (MINI1)........................................................................41
Table A.6: mPCIe Connector Pin Assignments..........................41
A.7 COM Port RS232/422/485 Settings .........................................................42
A.8.1 RS232/422/485 Setting................................................................42
A.8.2 COM Port RS422/485 Termination Resistor Setting ...................43
A.8 AT/ATX Setting (PSON1).........................................................................43
A.9 Board to Board Connector (Reserved for Expansion) .............................44
Table A.7:Expansion Board to Board Connector Pin Assignments…...44
A.10 TPM 2.0 BIOS Setting..............................................................................45

Chapter 1
Overview
This chapter overviews specifica-
tions for AMAX-5570.
◼ Introduction
◼ Safety Precautions
◼ Accessories
◼ Hardware Specifications
◼ Dimensions

3
UNO-127 User Manual
1.1 Introduction
AMAX-5570 is specially designed for machine and equipment builders, with efficient
Intel Atom® 4 core CPU series processors and optimized local expansion slots for
general IT and OT applications. On board eMMC storage and Memory design
minimizes the overall size and allows scalable local expansion with mPCIE and M.2
B key ports for further storage or wireless communication requirements. Extra Wi-Fi
or cellular modules can be installed for uploading data to cloud servers.
1.2 Safety Precautions
Below are a few safety precautions for preventing injury when making connections. In
most cases, users can use a standard cable for connection.
Warning! Always disconnect the power cord from the chassis before manual han-
dling. Do not connect the chassis while the system power is on. A sud-
den rush of power can damage sensitive electronic components. Only
experienced electronics personnel should open the chassis.
Warning! Toujours à la terre pour éliminer toute charge d'électricité statique avant
toucher AMAX-5570. Appareils électroniques modernes sont très sensi-
bles à charges d'électricité statique. Utilisez un bracelet antistatique à
tout moment. Placez tous composants électroniques sur une surface
antistatique ou dans un statique-sac blindé.
Caution! Always ground yourself to remove any static electric charge before
touching AMAX-5570. Modern electronic devices are very sensitive to
static electric charges. Use a grounding wrist strap at all times. Place all
electronic components on a static-dissipative surface or in a static
shielded bag.
Caution! Toujours débrancher le cordon d'alimentation de votre boîtier lorsque
vous êtes travailler. Ne branchez pas lorsque l'appareil est allumé. Un
afflux soudain de puissance peut endommager les composants électro-
niques sensibles. Seulement connu personnel de l'électronique
devraient ouvrir le châssis.

3
UNO-127 User Manual
1.3 Packing List
Please refer to below packing list:
◼AMAX-5570 (with din-rail mount)
◼1 x 2 PIN Plug-in block for Power
◼1 x 12 PIN Plug-in block for IO expansion
◼1 x Thermal PAD for M.2 B key modules(1990038939N000)
If anything is missing or damaged, contact your distributor or sales representative
immediately.
1.4 Hardware Specifications
1.4.1 General
Dimensions (W x D x H) 48.8 x 70 x 100 mm
Weight (Net) 0.5 kg
Mounting DIN-rail
Power Requirement 24VDC
Power consumption 15.8W (typical), 35W (Max)
Chapter 1
Overview

4
UNO-127 User Manual
1.4.2 System Hardware
BIOS
AMI EFI X64
Watchdog Timer
Programmable 255 levels timer interval, from 1 to 255 sec
Hardware Security
TPM 2.0
Processor
Intel® Atom® Quad core x6413E, 1.5GHz
Memory
4 GB DDR4 2666 MHz onboard(4 slots SMT)
Graphics Engine
Intel® UHD Graphics
Ethernet
3 x Realtek 8119i( 2 x External, 1 x Slice IO)
LED Indicators
LEDs for Power, RUN (Programmable),
LAN (Active, Status)
Storage
Onboard 64GB eMMC
Optional mSATA shared with mPCIe slot
Optional 2242 SATA SSD shared with M.2 B key slot
Expansion
1 x Full-size mPCIe slot (SATA/PCIe/USB2.0 signal)
1 x M.2 B key slot (SATA/USB3 signal)
Local AMAX-5000 Slice IO module(1A supply without power module)
1.4.3 I/O Interfaces
LAN Ports
2 x RJ45,
1 x SliceIO,
Speed
2 x 10/100/1000 Mbps
1 x 10/100 Mbps
USB Ports 2 x USB 3.2 Gen1
Displays 1 x HDMI (1920 x 1080 @60Hz)
Power Connector 1 x 2 Pin (terminal block)
1.4.4 Environment
Operating Temperature* -20 ~ 60 °C (-4 ~ 140 °F) with 0.7m/s airflow
(without expansion)
-20 ~ 55 °C (-4 ~ 131 °F) with 0.7 m/s airflow
(with mPCIe +M.2 Bey key+ AMAX-5000 expansion)
Storage Temperature - 40 ~ 85 °C (-40 ~ 185 °F)
Relative Humidity Operating, 10~95% RH @ 40 °C/104 °F, non-condensing
Non-Operating, 10~95% RH @ 60 °C/140 °F, non-condensing
Shock Protection Operating, IEC 60068-2-27, 50G, half sine, 11ms
Vibration Protection Operating, IEC 60068-2-64, 2 Grms, random,
5 ~ 500 Hz, 1hr/axis

1.4.5 Certifications
Certification CE, FCC, CB, UL 61010-2-201, BSMI
Chapter 1
Overview

1.5 Dimensions
48.8 x 70 x 100 mm (W x D x H mm)
Figure 1.1 AMAX-5570 Dimensions

Chapter 2
Hardware
Functionality
This chapter details setup instruc-
tions for AMAX-5570’s hardware
functions. It includes connecting
peripherals and indicators.
◼ Introduction
◼ External I/O Connector
◼ Internal I/O Connector
◼ LED Indicators
◼ Reset Buttons
◼ Antenna Hole

2.1 Introduction
The following diagram demonstrates the location of AMAX-5570’s motherboard’s
key components and internal/external connectors.
Figure 2.1 Diagram of Connector Locations on AMAX-5570 MB (Top Side)
Figure 2.2 Diagram of Key Components Location on AMAX-5570 MB(Bottom Side)
CPU
Memory
RST1
Memory
LAN1
CN3
CN1
DCIN1
USB1
PWR1
SW4
BAT1
SW3
BTB1
BTB2

Table 2.1: Keycomponents, Connectors on Mother Board
Category
Label
Function
External
DCIN1
Power Connector
CN1
HDMI Connector
LAN1
LAN Connector x2
USB1
USB 3.2 Connector x2
RST1
Reset Button
PWR1
Power Button
Internal
BAT1
RTC Battery
CN3
MiniPCIe Connector
BTB1
Riser Connector 1
BTB2
Riser Connector 2
CPU
CPU
SW3
Clean CMOS
Pin1-2 Normally
Pin2-3 Clean CMOS
SW4
AT/ATX mode setup
PIN 1-2 AT(Default)
PIN 2-3 ATX
The next diagram demonstrates the location of AMAX-5570’s Daughter board’s key
components and internal/external connectors.
Figure 2.3 Diagram of Key Components Location on AMAX-5570 DB01(Top Side)