Advantech AIIS-1200 Series User manual

User Manual
AIIS-1200
Embedded IPC

AIIS-1200 User Manual ii
Attention!
Please note:
This package contains a hard-copy user manual in Chinese for China CCC certifica-
tion purposes, and there is an English user manual included as a PDF file on the CD.
Please disregard the Chinese hard copy user manual if the product is not to be sold
and/or installed in China.

iii AIIS-1200 User Manual
Copyright
The documentation and the software included with this product are copyrighted 2016
by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right
to make improvements in the products described in this manual at any time without
notice.
No part of this manual may be reproduced, copied, translated or transmitted in any
form or by any means without the prior written permission of Advantech Co., Ltd.
Information provided in this manual is intended to be accurate and reliable. However,
Advantech Co., Ltd. assumes no responsibility for its use, nor for any infringements
of the rights of third parties that may result from its use.
Acknowledgements
Award is a trademark of Award Software International, Inc.
Intel® and Pentium® are trademarks of Intel Corporation.
Microsoft Windows® is a registered trademark of Microsoft Corp.
Cooper is a trademark of Eaton Corporation.
Infineon is a trademark of Infineon Technologies.
TI is a trademark of Texas Instruments.
Asmedia is a trademark of Asmedia Technology INC.
Exar is a trademark of Exar Corporation.
INTERSIL is a trademark of Intersil Corporation.
Nuvoton is a trademark of Nuvoton Technology Corporation.
All other product names or trademarks are properties of their respective owners.
For more information about this and other Advantech products, please visit our web-
site at:
http://www.advantech.com/
http://www.advantech.com/ePlatform/
For technical support and service, please visit our support website at:
http://support.advantech.com.tw/support/
Part No. 2001120010 Edition 1
Printed in China May 2016

AIIS-1200 User Manual iv
Product Warranty (2 years)
Advantech warrants to you, the original purchaser, that each of its products will be
free from defects in materials and workmanship for two years from the date of pur-
chase.
This warranty does not apply to any products that have been repaired or altered by
persons other than repair personnel authorized by Advantech, or which have been
subject to misuse, abuse, accident or improper installation. Advantech assumes no
liability under the terms of this warranty for consequences of such events.
Because of Advantech’s high quality-control standards and rigorous testing, most of
our customers never need to use our repair service. If an Advantech product is defec-
tive, it will be repaired or replaced at no charge during the warranty period. For out-
of-warranty repairs, you will be billed according to the cost of replacement materials,
service time and freight. Please consult your dealer for more details.
If you think you have a defective product, follow these steps:
1. Collect all the information about the problem encountered. (For example, CPU
speed, Advantech products used, other hardware and software used, etc.) Note
anything abnormal and list any onscreen messages you get when the problem
occurs.
2. Call your dealer and describe the problem. Please have your manual, product,
and any helpful information readily available.
3. If your product is diagnosed as defective, obtain an RMA (return merchandise
authorization) number from your dealer. This allows us to process your return
more quickly.
4. Carefully pack the defective product, a fully-completed Repair and Replacement
Order Card and a photocopy proof of purchase date (such as your sales receipt)
in a shippable container. A product returned without proof of the purchase date
is not eligible for warranty service.
5. Write the RMA number visibly on the outside of the package and ship it prepaid
to your dealer.
Declaration of Conformity
FCC Class A
Note: This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Opera-
tion of this equipment in a residential area is likely to cause harmful interference in
which case the user will be required to correct the interference at his own expense.

v AIIS-1200 User Manual
Technical Support and Assistance
1. Visit the Advantech web site at www.advantech.com/support, where you can
find the latest information about the product.
2. Contact your distributor, sales representative, or Advantech's customer service
center for technical support if you need additional assistance. Please have the
following information ready before you call:
–Product name and serial number
–Description of your peripheral attachments
–Description of your software (operating system, version, application software,
etc.)
–A complete description of the problem
–The exact wording of any error messages
Packing List
Before installation, please ensure the following items have been shipped:
AIIS-1200 bare-bone system x1
Startup manual x1
Driver CD x 1
2-pin phoenix connector x 1
Wall mounting bracket x 2
DIN-rail mounting bracket x 1
Ordering Information
Optional Accessories
Part number Camera interface Display USB3.0 Isolated DIO COM1 COM2
AIIS-1200P-
S6A1E 2-CH GigE PoE VGA + DP++ 48-CH 11
AIIS-1200U-
S6A1E 2-CH USB3.0 VGA + DP++ 48-CH 11
Part Number Description
1950016395T102 DIN-Rail Bracket
96PSA-A65W19P2-2 DC24 Adapter 65Watt
1700023217-01 8-CH DIO Cable for Wiring Board
ADAM-3925-AE 8-CH DIO DB-25 Wiring Terminal, DIN-rail Mount

AIIS-1200 User Manual vi
Warnings, Cautions and Notes
Battery Information
Batteries, battery packs, and accumulators should not be disposed of as unsorted
household waste.
Please use the public collection system to return, recycle, or treat them in compliance
with the local regulations.
Warning! Warnings indicate conditions in which there is a chance of personal
injury!
Caution! Cautions are included to help you avoid damaging hardware or losing
data. e.g.:
There is a danger of a new battery exploding if it is incorrectly installed.
Do not attempt to recharge, force open, or heat the battery. Replace the
battery only with the same or equivalent type recommended by the man-
ufacturer. Discard used batteries according to the manufacturer's
instructions.
Caution! DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY
REPLACED. REPLACE ONLY WITH THE SAME OR EQUIVALENT
TYPE RECOMMENDED
BY THE MANUFACTURER, DISCARD USED
BATTERIES
ACCORDING TO THE MANUFACTURER’S INSTRUC-
TIONS.
Caution! DANGER D’EXPLOSION SI LA BATTERIE EST
INEXACTEMENT
REMPLACEE. REMPLACEZ
SEULEMENT AVEC LA MEME CHOSE
OU LE TYPE
EQUIVALENT RECOMMANDE PAR LE FABRICANT,
JETTENT LES BATTERIES UTILISEES INSTRUCTIONS DE S
SELON FABRICANT DES’.
Note! Notes provide optional additional information.

vii AIIS-1200 User Manual
Safety Instructions
1. Please read these safety instructions carefully.
2. Please keep this User’s Manual for later reference.
3. Please disconnect this equipment from AC outlet before cleaning. Use a damp
cloth. Don’t use liquid or sprayed detergent for cleaning. Use moist sheet or
cloth for cleaning.
4. For pluggable equipment, the socket-outlet shall near the equipment and shall
be easily accessible.
5. Please keep this equipment from humidity.
6. Lay this equipment on a reliable surface when installing. A drop or fall could
cause injury.
7. The openings on the enclosure are for air convection hence protecting the
equipment from overheating. DO NOT COVER THE OPENINGS.
8. Make sure the voltage of the power source when connecting the equipment to
the power outlet.
9. Place the power cord such a way that people cannot step on it. Do not place
anything over the power cord.
10. All cautions and warnings on the equipment should be noted.
11. If the equipment is not used for long time, disconnect the equipment from mains
to avoid being damaged by transient over-voltage.
12. Never pour any liquid into ventilation openings; this could cause fire or electrical
shock.
13. Never open the equipment. For safety reasons, only qualified service personnel
should open the equipment.
14. If one of the following situations arises, get the equipment checked by service
personnel:
The power cord or plug is damaged.
Liquid has penetrated into the equipment.
The equipment has been exposed to moisture.
The equipment does not work well, or you cannot get it to work according to
the user's manual.
The equipment has been dropped and damaged.
The equipment has obvious signs of breakage.
15. DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT WHERE THE
STORAGE TEMPERATURE MAY GO BELOW -40° C (-40° F) OR ABOVE 85°
C (185° F). THIS COULD DAMAGE THE EQUIPMENT. THE EQUIPMENT
SHOULD BE IN A CONTROLLED ENVIRONMENT.
16. CAUTION: DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY
REPLACED. REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE
RECOMMENDED BY THE MANUFACTURER, DISCARD USED BATTERIES
ACCORDING TO THE MANUFACTURER'S INSTRUCTIONS.
17. The sound pressure level at theoperator's position according to IEC 704-1:1982
is no more than 70 dB (A).
18. RESTRICTED ACCESS AREA: The equipment should only be installed in a
Restricted Access Area.
DISCLAIMER: This set of instructions is given according to IEC 704-1. Advantech
disclaims all responsibility for the accuracy of any statements contained herein.

AIIS-1200 User Manual viii

ix AIIS-1200 User Manual
Contents
Chapter 1 General Introduction ...........................1
1.1 Introduction ...............................................................................................2
1.2 Product Features.......................................................................................2
1.2.1 General.........................................................................................2
1.2.2 Display..........................................................................................2
1.2.3 Ethernet ........................................................................................2
1.3 Chipset......................................................................................................3
1.3.1 Functional Specification................................................................3
1.4 Mechanical Specifications.........................................................................4
1.4.1 Dimensions...................................................................................4
Figure 1.1 AIIS-1200P Mechanical Dimension Drawing.............4
Figure 1.2 AIIS-1200U Mechanical Dimension Drawing..............4
1.4.2 Weight...........................................................................................4
1.5 Power Requirements.................................................................................5
1.5.1 System power...............................................................................5
1.5.2 RTC battery...................................................................................5
1.6 Environment Specification.........................................................................5
1.6.1 Operating temperature..................................................................5
1.6.2 System safety certification test temperature.................................5
1.6.3 Relative humidity...........................................................................5
1.6.4 Storage temperature.....................................................................5
1.6.5 Vibration during operation.............................................................5
1.6.6 Shock during operation.................................................................5
1.6.7 Safety............................................................................................5
1.6.8 EMC..............................................................................................5
Chapter 2 H/W Installation....................................7
2.1 Introduction ...............................................................................................8
2.2 Jumpers ....................................................................................................8
2.2.1 Jumper description........................................................................8
2.2.2 Jumper list.....................................................................................9
Table 2.1: Jumper List.................................................................9
2.3 Connectors..............................................................................................10
2.3.1 AIIS-1200 External I/O Connectors.............................................10
Figure 2.1 AIIS-1200 I/O connectors.........................................10
Table 2.2: COM Connector Pin Assignments............................11
Figure 2.2 Ethernet Connector ..................................................11
Table 2.3: Ethernet Connector Pin Assignments.......................11
Figure 2.3 Audio Connector.......................................................12
Table 2.4: Audio Connector Pin Assignments...........................12
Figure 2.4 USB 3.0 Connector...................................................12
Table 2.5: USB 3.0 Connector Pin Assignments.......................12
Figure 2.5 VGA Connector ........................................................13
Table 2.6: VGA Connector Pin Assignments.............................13
Figure 2.6 DP++ Connector.......................................................13
Table 2.7: DP Port Connector Pin Assignments........................13
Figure 2.7 2-pin header .............................................................14
Table 2.8:
Pin Assignments for Power Connector Pin Header ......14
Figure 2.8 Power Button............................................................14
2.4 Installation...............................................................................................15
2.4.1 HDD installation..........................................................................15
Figure 2.9 Open case................................................................15
Figure 2.10HDD Rack assembly ................................................16

AIIS-1200 User Manual x
Figure 2.11HDD assembly ......................................................... 16
2.4.2 m-SATA/Mini-PCIe Installation................................................... 16
2.4.3 AIIS-1200 MB IO connector........................................................ 17
Chapter 3 AMI BIOS Setup................................. 19
3.1 Introduction............................................................................................. 20
3.2 Entering Setup........................................................................................ 21
3.2.1 Main Setup.................................................................................. 21
3.2.2 Advanced BIOS Features Setup................................................. 23
3.2.3 Chipset........................................................................................ 34
3.2.4 Security....................................................................................... 37
3.2.5 Boot ............................................................................................ 38
3.2.6 Save & Exit................................................................................. 39
Chapter 4 Software Installation.........................41
4.1 Chipset Software Installation Utility......................................................... 42
4.1.1 Before you begin......................................................................... 42
4.1.2 Introduction................................................................................. 42
4.1.3 Windows 10 / Windows 8.1/ Windows 7..................................... 43
4.2 Integrated Graphic Device Setup............................................................ 43
4.2.1 Introduction................................................................................. 43
4.2.2 Windows 10 /Windows 8.1 /Windows 7 Driver Setup................. 43
4.3 LAN Configuration................................................................................... 44
4.3.1 Introduction................................................................................. 44
4.3.2 Features...................................................................................... 44
4.3.3 Installation................................................................................... 44
4.3.4 Windows 10 /Windows 8.1 /Windows 7...................................... 44
4.4 Intel® TXE (Trusted Execution Engine) Setup........................................ 45
4.5 Install USB3.0......................................................................................... 45
4.5.1 Introduction................................................................................. 45
Appendix A Programming the Watchdog Timer ...47
A.1 Programming the Watchdog Timer......................................................... 48
A.1.1 Watchdog Timer Overview ......................................................... 48
A.1.2 Programming the Watchdog Timer............................................. 48
Table A.1: Watchdog Timer Registers....................................... 50
A.1.3 Example Program....................................................................... 51
Appendix B Programming the GPIO....................55
B.1 Supported GPIO Register....................................................................... 56
B.1.1 GPIO Registers........................................................................... 56
B.1.2 GPIO Example Program............................................................. 57
B.1.3 Example Program (C Language)................................................ 58

Chapter 1
1General Introduction
This chapter gives background
information on AIIS-1200.

AIIS-1200 User Manual 2
1.1 Introduction
AIIS-1200 is a compact fanless system incorporating the latest Intel® latest genera-
tion SoC (System On Chip) platform and targeted at machine vision applications. The
AIIS-1200 is an independent, fanless, Compact Embedded Box with a wide range of
DC power inputs. The rugged aluminum case provides not only a great thermal solu-
tion, but also resists high EMI/shock/vibration. AIIS-1200 compact fanless computer
features Intel® latest generation 4-core processor and a proprietary 2-channel cam-
era modules, PoE or USB3.0, which it is a proper solution for machine vision applica-
tions. Moreover, it features rich I/O interfaces including Ethernet, USB 3.0, serial
ports, and one Mini PCIes for different applications.
1.2 Product Features
1.2.1 General
CPU: Intel® Celeron® Processor N3160
PCH: N/A
System Memory: On board DDR3L 1600 8GB
Storage:
–Supports 1 drive bay space for SATA 2.5" HDD/SSD
Graphic: VGA + DP++
Ethernet Port: 1 x RJ45
Watchdog Timer: Single chip Watchdog 255-level interval timer, setup by soft-
ware
I/O Interface: 1 x RS232/422/485 / 1 x RS-232
USB: 4 x USB3.0
Audio: High Definition Audio (HD), Line-out, Mic-in
Expansion interface: 1 x Mini PCIe sockets (m-SATA/PCIe)
1.2.2 Display
Chipset: Intel® HD Graphics 400, support DirectX 12
Graphics Video Max Memory: 1.7 GB
Resolution:
–VGA: Supports up to 1920 x 1080 @ 60 Hz
–DP: Supports up to 3840 x1080 @ 30 Hz
1.2.3 Ethernet
Chipset:
–LAN 1: Intel® i210IT
Speed: 10/100/1000 Mbps
Interface: 1 x RJ45
Standards: Compliant with IEEE 802.3, IEEE802.3U, IEEE 802.ab.

3 AIIS-1200 User Manual
Chapter 1 General Introduction
1.3 Chipset
1.3.1 Functional Specification
Processor Intel® Celeron® Processor N3160
Lithography: 14nm
Memory Support on board DDR3L-1600MHz 8 GB
Chipset integrated
Intel HD
Graphic
Intel® HD Graphics 400
–Supports DirectX 12 (Windows 10)
–Supports DirectX 11.x (Windows 7/8.1)
–Supports OpenGL 4.2
–Supports Intel® Quick Sync Video
IO interface
–VGA: Supports resolution up to 1920 x 1200 @ 60 Hz
(VGA connector: On-board D-SUB 15P)
–DP++: Supports resolution up to 3840x2160 @ 30 Hz
SATA interface One SATA 3.0 port
USB interface USD host interface for 4 x USB3.0 ports
Supports high-speed, full-speed, and low-speed capable
Supports legacy keyboard/mouse software
Power
Management
Supports ACPI 5.0
ACPI Power Management Logic Supported
Power Connector: Plug-in block 2Px1
BIOS AMI 64Mb Flash BIOS via SPI
Serial ports
Nuvoton NCT6106D supports up to 6 serial ports
High speed NS16C550A compatible UARTs with data rates to
1.5 Mbps
Supports IRQ sharing among serial port on XPE
COM 1: Supports RS-232/422/485 with BIOS setup, supports
auto flow control
COM 2: Supports RS-232 serial port connector: D-SUB
CON.9P
LAN
LAN1: Intel® i210IT
Compliant with IEEE 802.3, IEEE 802.3u, IEEE 802.ab.
Supports 10/100/1000 Mbps
Supports Wake on LAN
Audio
Audio Codec: Realtek ALC892:
Compliant with HD Audio specifications
Supports 16/20/24-bit DAC and 16/20/24-bit ADC resolution
Supports: Line-out, Mic-in
DAC supports 16/20/24-bit PCM format, multiple stereo
recording
Battery BR2032 3 V/190mAh

AIIS-1200 User Manual 4
1.4 Mechanical Specifications
1.4.1 Dimensions
Figure 1.1 AIIS-1200P Mechanical Dimension Drawing
Figure 1.2 AIIS-1200U Mechanical Dimension Drawing
1.4.2 Weight
1.1Kg (2.43lb)
(Unit: mm)
(Unit: mm)
(Unit: mm)

5 AIIS-1200 User Manual
Chapter 1 General Introduction
1.5 Power Requirements
1.5.1 System power
Minimum power input: DC12V (-25%) -30V (+20%), Absolute Maximum Ratings
Voltage is 9V - 36V
1.5.2 RTC battery
BR2032 3 V/190 mAh
1.6 Environment Specification
1.6.1 Operating temperature
-10 ~ 60 °C with 0.7m3/sec air flow: with 1 x Industrial SSD
1.6.2 System safety certification test temperature
0 ~ 40 °C with 2.5” HDD
1.6.3 Relative humidity
95% @ 40 °C (non-condensing)
1.6.4 Storage temperature
-40 ~ 85 °C (-40 ~ 185 °F)
1.6.5 Vibration during operation
When system is equipped with SSD only: 3 Grms, IEC 60068-2-64, random, 5 ~
500 Hz, 1 Oct/min., 1 hr/axis, x,y,z 3 axes.
When system is equipped with 2.5-inch HDD: 0.5 Grms, IEC 60068-2-64, ran-
dom, 5 ~ 500 Hz, 1 Oct/min., 1 hr/axis, x,y,z 3 axes.
1.6.6 Shock during operation
When system is equipped with SSD only: 20 G, IEC 60068-2-27, half sine, 11
ms duration.
1.6.7 Safety
CCC, UL
1.6.8 EMC
CE, FCC, CCC, BSMI

AIIS-1200 User Manual 6

Chapter 2
2H/W Installation
This chapter introduces external
IO and the installation of
AIIS-1200 hardware.

AIIS-1200 User Manual 8
2.1 Introduction
The following sections show the internal jumper settings and the external connectors
and pins assignment for applications.
2.2 Jumpers
2.2.1 Jumper description
You may configure the AIIS-1200 to match the needs of your application by setting
jumpers. A jumper is a metal bridge used to close an electric circuit. It consists of two
metal pins and a small metal clip (often protected by a plastic cover) that slides over
the pins to connect them. To close a jumper, you connect the pins with the clip. To
open a jumper, you remove the clip. Sometimes a jumper will have three pins,
labeled 1, 2 and 3. In this case you would connect either pins 1 and 2, or 2 and 3.
The jumper settings are schematically depicted in this manual as follows.
A pair of needle-nose pliers may be helpful when working with jumpers. If you have
any doubts about the best hardware configuration for your application, contact your
local distributor or sales representative before you make any changes. Generally, you
simply need a standard cable to make most connections.
closed 2-3closedopen
12 12
closed 2-3closedopen

9 AIIS-1200 User Manual
Chapter 2 H/W Installation
2.2.2 Jumper list
2.2.2.1 Clear CMOS
AIIS-1200 single board computer contains a jumper that can erase CMOS data and
reset the system BIOS information. Normally this jumper should be set with pins 1-2
closed. If you want to reset the CMOS data, set CMOS1 to 2-3 closed for just a few
seconds, and then move the jumper back to 1-2 closed. This procedure will reset the
CMOS to its default setting.
2.2.2.2 System AT/ATX mode function option
AIIS-1200 support AT or ATX mode and Default is ATX module. if you want to change
to AT mode that you can find AT/ATX mode jumper in motherboard.
2.2.2.3 System Watch-Dog mode function option
AIIS-1200 single board computer contains a jumper that can set Watch-Dog mode.
Table 2.1: Jumper List
Label Function
JCMOS1 Clear CMOS
PSON1 System AT/ATX mode option
JWDT1_JOBS1 Watch-Dog mode option
CMOS1 Clear CMOS
Footprint 3x1 Pin
Setting Function
(1-2) Normal (default)
(2-3) Clear CMOS
PSON1 System AT/ATX mode option
FootPrint 3x1 Pin
Setting Function
(1-2) AT module
(2-3) ATX module
JWDT1_JOBS1 Watch-Dog mode function option
FootPrint 5x1 pin
Setting Function
(2-3) Watch Dog
(4-5) ERR_BEEP

AIIS-1200 User Manual 10
2.3 Connectors
2.3.1 AIIS-1200 External I/O Connectors
Figure 2.1 AIIS-1200 I/O connectors
Line-out
Mic-in USB3.0
Display
Port DIO
9V~36V
DC
On/Off
Port
PoE 1/2
LED
PoE
Module
HDD
LED
Thermal
LED
Power
Buttton
USB3.0
Module
VGA
COM1/2
LAN1USB3.0
Front View
Rear View