Advantech DVP-7636HE User manual

User Manual
MODEL NAME: DVP-7636HE

2
TABLE OF CONTENTS
1.
PRODUCT INTRODUCTION .................................................................................................................. 3
1.1. P RODUCT B RIEF .................................................................................................................................. 3
1.2. S PECIFICATION .................................................................................................................................... 3
2.
HARDWARE INSTALLATION............................................................................................................... 5
2.1. P ACKAGE C ONTENTS ........................................................................................................................... 5
2.2. C ONNECTION D IAGRAM ....................................................................................................................... 5
2.3. P RECAUTION ....................................................................................................................................... 5
2.4. PCI/PCIE ........................................................................................................................................... 6
3.
SOFTWARE INSTALLATION ................................................................................................................ 7
3.1. S UPPORT OS ....................................................................................................................................... 7
3.2. D RIVER I NSTALLATION ........................................................................................................................ 7
2/7

3
1. PRODUCT INTRODUCTION
1.1. Product Brief
DVP-7636HE is a high-quality, high-performance capture device which is specially designed
for high-definition video capture applications. It supports up to 4 channel of high-definition,
1080p60 video from 4 x SDI source and selectable 2 x 3.5mm (4 mono) audio source. With
hardware support, DVP-7636HE can record live video from high-definition signal sources into
H.264 files.
1.2. Specification
Model
DVP-7636HE
Max. FPS
1920×1080p@60/50fps in → 1920×1080p@60/50fps
out
Recording
Hardware Compression, Real-Time Mode
Mode
Product
photo
Dimension
157×101.01 ( mm ) PCIe Full Height
Interface
PCIe×4 ( Gen2 )
Video Input
4×SDI
Display
Video
YV12, NV12, YUY2, RGB24, RGB32
Format
3G-SDI
1920×1080p@60/50fps
HD-SDI
Video RAW
1920×1080p@30/25/24fps
Data
1920×1080i@60/50fps
Resolution
1280×720p@60/50fps
SD-SDI
720×480i@60fps
720×576i@50fps
Recording
Video
H.264 ( Hardware Compression )
Format
3/7

4
3G-SDI
1920×1080p@60/50fps
HD-SDI
Recording
1920×1080p@30/25/24fps
Video
1920×1080i@60/50fps
Resolution
1280×720p@60/50fps
SD-SDI
720×480i@60fps
720×576i@50fps
4×SDI Embedded Audio
Audio Input
2×3.5mm Audio Phone Jack
PCB Audio Pin Input: 4×Stereo Audio
Audio
Stereo / 16-bit / 32000 ~ 48000Hz
Format
WatchDog
✓
Multiple
∞
Cards
Support API : DirectShow, V4L2, FFmpeg, Gstreamer
SDK
Support Language : C++, C#, .NET, Visual Basic, Qt,
Delphi
4/7

5
2. HARDWARE INSTALLATION
2.1. Package Contents
Item
Amount
DVP-7636HE
1
2 x RCA to 3.5mm stereo analog audio cable
2
2.2. Connection Diagram
Figure below is the connection diagram for supported signal and interface.
Signal Connection diagram
2.3. Precaution
Before proceed, make sure touch a safely grounded object or metal object before touching
the device.
5/7

6
Wrist strap
Please follow below chapter for installation operations
2.4. PCI/PCIE
Turn off PC/notebook and remove power cord from AC plug/sockets on the wall.

Remove notebook battery.

After make sure the system is fully shut down, open the chassis.

Unpack the device package and make sure don’t touch any electrical and
semiconductor components on the device, especially ICs on board.

Install PCI/PCIE card to available motherboard PCI/PCIE slot and fasten the screw on the
device and back plate.

Close the chassis and connect signal source to the device.

Turn on the system.
6/7

7
3. SOFTWARE INSTALLATION
3.1. Support OS
Windows based system
Windows XP
Support
Windows Vista
Support
Windows 7
Support
Windows 8/8.1
Support
Windows 10
Support
Linux based system
Linux 2.6.14 or Higher
Support
3.2. Driver Installation
After install the device and reboot the PC/notebook, the “Windows Found New
Hardware Wizard” will appear and detect the device. Please click “Cancel” to exit the
Wizard, and implement installation program to install the device driver and application.
Please click on the driver and follow the instruction to start the installation.

While the installation is completed, user may check the device driver is installed
correctly by following steps

Start

Control Panel

System

Device Manager

And user can find device from the device manager dialog (see below figure, device
number will different by channel numbers).
DVP Series
7/7