Advantech PCI-1723 Installation and operation manual

PCI-1723 Startup Manual 1
Before card installation, please ensure that the following
items are included in your shipment:
1. 1 x PCI-1723 card
2. 1 x Startup manual
If any of these items are missing or damaged, contact your
distributor or sales representative immediately.
For more detailed information regarding this product, please
download the PCI-1723 user manual from the Advantech
website.
FCC Class A
This equipment has been tested and found to comply with
the limits for a Class A digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when
the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio fre-
quency energy and, if not installed and used in accordance
with the instruction manual, may cause harmful interference
to radio communications. Operation of this equipment in
a residential area is likely to cause interference. In such
cases, users are required to correct the interference at their
own expense.
CE
This product has passed the CE test for environmental
specications when shielded cables are used for external
wiring. We recommend using shielded cables. Such cables
are available from Advantech. Please contact your local
supplier for ordering information.
PCI-1723 16-bit, 8-ch Analog Output PCI Card with
16-ch Digital I/O
Startup Manual
Analog Output
Channels 8
Resolution 16 bits
Voltage output
range -10 ~ +10 V
Current output
range 0~20mA , 4~20mA
Voltage Output
Accuracy
Gain Error < ±6 LSB
O󰀨set Error < ±6 LSB
Current Output
Accuracy
Gain Error
<±0.1% of FSR (after manual
calibration),
<±3% of FSR (without manual
calibration)
O󰀨set Error
<±0.1% of FSR (after manual
calibration),
<±3% of FSR (without manual
calibration)
Driving
Capacity 5 mA max.
Settling time 100 µs (to ±6 LSB of FSR)
Digital Input /Output
Input Channels 16 (bi-directional)
Number of ports 2
Input Voltage Low: 0.8 V max.
High: 2.0 V min.
Output Voltage
Low: 0.5 V max. @ +24 mA (sink)
High: 2.0 V min. @ -15 mA
(source)
General
I/O Connector
Type 68-pin SCSI-II female
Dimensions 168 × 99 mm2(6.6 × 3.9 in.2)
Power
Consumption
Typical +5 V @ 400mA
Max +5 V @ 820mA
Temperature Operating 0 ~ 60 °C (32 ~ 158 °F)
Storage -40 ~ 70 °C (-40 ~ 185 °F)
Relative
Humidity
Operating 10 to 90% RH,
non-condensing
Storage 5 ~ 95% RH
non-condensing
Form Factor PCI
Specications
Packing List
For more information about this or other Advantech
products, please visit our website at
http://www.advantech.com
For technical support services, please visit our support
website at
http://support.advantech.com
This manual is for PCI-1723.
Part No. 2003172321 Edition 2
December 2019
User Manual
Declaration of Conformity

2 PCI-1723 Startup Manual
PCI-1723 is equipped with a built-in DIP switch (SW1) for
dening the board ID of each module. When multiple cards
are installed on the same chassis, the board ID switch can
be used to identify the device number of each card.
Keep Last Status Jumper
An on-board jumper is used to congure the status of all
output signals after system hot-reset. User can choose to
reset all output signals to the default values after system
hot-reset, or keep them as the status before hot-reset.
The conguration of the keep last status jumper is shown in
below Table:
JP9 Description
(1:2) Keep last status after hot reset
(2:3) Not keep last status after hot reset
Software Installation
PCI-1723 is a high-density multiple channel analog PCI
card. The product’s user manual, drivers, and programming
SDK are available on the Advantech website, and can be
accessed using the link below. Simply search the product
name “PCI-1723”.
http://support.advantech.com.tw
Hardware Installation
After the device driver is installed, you can now install the
PCI-1723 card in your computer.
Please follow the steps below to install the PCI-1723 card.
1. Touch any metal part of your computer to neutralize the
static electricity that may be in your body.
2. Plug the card into a PCI slot. Do not use excessive
force to avoid damaging the card.
Pin Assignments
Board ID Switch Installation (Cont,)

PCI-1723 Startup Manual 3
Pin Name Type Pin# Description
Analog Output
VOUT0 O 67 Voltage output channel 0
VOUT1 O 33 Voltage output channel 1
VOUT2 O 62 Voltage output channel 2
VOUT3 O 28 Voltage output channel 3
VOUT4 O 57 Voltage output channel 4
VOUT5 O 23 Voltage output channel 5
VOUT6 O 52 Voltage output channel 6
VOUT7 O 18 Voltage output channel 7
IOUT0 O 65 Current output channel 0
IOUT1 O 31 Current output channel 1
IOUT2 O 60 Current output channel 2
IOUT3 O 26 Current output channel 3
IOUT4 O 55 Current output channel 4
IOUT5 O 21 Current output channel 5
IOUT6 O 50 Current output channel 6
IOUT7 O 16 Current output channel 7
Digital Input/Output
DIO0 I/O 47 Digital input/output channel 0
DIO1 I/O 13 Digital input/output channel 1
DIO2 I/O 46 Digital input/output channel 2
DIO3 I/O 12 Digital input/output channel 3
DIO4 I/O 45 Digital input/output channel 4
DIO5 I/O 11 Digital input/output channel 5
DIO6 I/O 44 Digital input/output channel 6
DIO7 I/O 10 Digital input/output channel 7
DIO8 I/O 43 Digital input/output channel 8
DIO9 I/O 9 Digital input/output channel 9
DIO10 I/O 42 Digital input/output channel 10
DIO11 I/O 8 Digital input/output channel 11
DIO12 I/O 41 Digital input/output channel 12
DIO13 I/O 7 Digital input/output channel 13
DIO14 I/O 40 Digital input/output channel 14
DIO15 I/O 6 Digital input/output channel 15
Power and Ground
+12V - 35 +12 V power supply for external use
+5V - 1 +5 V power supply for external use
AGND - 14, 17, 19, 22, 24, 27, 29, 32,
48, 51, 53, 56, 58, 61, 63, 66 Analog ground
DGND - 5, 39 Digital ground
Others
NC - 2 ~ 4, 15, 20, 25 ,30, 34,
36 ~ 38, 49, 54, 59, 64, 68 No connect.
Pin Assignments (Cont.)