Advantech SPC-515 Series User manual

User Manual
SPC-515 Series
Stainless Steel Multi-Touch
Panel Computer with Intel
Skylake Processor
申請商 : 研華股份有限公司
地址 : 台北市內湖區瑞光路 26 巷 20 弄 1 號
電話 :[phone]

SPC-515 Series User Manual ii
Copyright
The documentation and the software included with this product are copyrighted 2019
by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right
to make improvements in the products described in this manual at any time without
notice. No part of this manual may be reproduced, copied, translated or transmitted
in any form or by any means without the prior written permission of Advantech Co.,
Ltd. Information provided in this manual is intended to be accurate and reliable. How-
ever, Advantech Co., Ltd. assumes no responsibility for its use, nor for any infringe-
ments of the rights of third parties, which may result from its use.
Acknowledgements
Intel and Pentium are trademarks of Intel Corporation.
Microsoft Windows and MS-DOS are registered trademarks of Microsoft Corp.
All other product names or trademarks are properties of their respective owners.
This Manual Covers the Following Models:
SPC-515
SPC-515-633AE; SPC-515-6C3AE; SPC-515-653AE; SPC-515-673AE
SPC515631901-T;SPC515631902-T;SPC515631903-T;SPC515631904-T;
SPC515631905-T;
SPC515632001-T;SPC515632002-T;SPC515632003-T;SPC515632004-T;
SPC515632005-T;
SPC515632101-T;SPC515632102-T;SPC515632103-T;SPC515632104-T;
SPC515632105-T;
SPC515632201-T;SPC515632202-T;SPC515632203-T;SPC515632204-T;
SPC515632205-T;
SPC515632301-T;SPC515632302-T;SPC515632303-T;SPC515632304-T;
SPC515632305-T;
SPC515632401-T;SPC515632402-T;SPC515632403-T;SPC515632404-T;
SPC515632405-T;
ATTENTION!
Pour éviter les chocs. Ne pas retirer lecouvercle. Aucune pièce réparable par l’utilisa-
teur. Pour l’entertien adressez-vours aux personnes qulifiées, s.v.p.
Part No. 2003051510 Edition 1
Printed in Taiwan August 2020

iii SPC-515 Series User Manual
Product Warranty (2 years)
Advantech warrants to you, the original purchaser, that each of its products will be
free from defects in materials and workmanship for two years from the date of pur-
chase.
This warranty does not apply to any products which have been repaired or altered by
persons other than repair personnel authorized by Advantech, or which have been
subject to misuse, abuse, accident or improper installation. Advantech assumes no
liability under the terms of this warranty as a consequence of such events.
Because of Advantech’s high quality-control standards and rigorous testing, most of
our customers never need to use our repair service. If an Advantech product is defec-
tive, it will be repaired or replaced at no charge during the warranty period. For out-
of-warranty repairs, you will be billed according to the cost of replacement materials,
service time and freight. Please consult your dealer for more details.
If you think you have a defective product, follow these steps:
1. Collect all the information about the problem encountered. (For example, CPU
speed, Advantech products used, other hardware and software used, etc.) Note
anything abnormal and list any onscreen messages you get when the problem
occurs.
2. Call your dealer and describe the problem. Please have your manual, product,
and any helpful information readily available.
3. If your product is diagnosed as defective, obtain an RMA (return merchandize
authorization) number from your dealer. This allows us to process your return
more quickly.
4. Carefully pack the defective product, a fully-completed Repair and Replacement
Order Card and a photocopy proof of purchase date (such as your sales receipt)
in a shippable container. A product returned without proof of the purchase date
is not eligible for warranty service.
5. Write the RMA number visibly on the outside of the package and ship it prepaid
to your dealer.

SPC-515 Series User Manual iv
Declaration of Conformity
CE
This product has passed the CE test for environmental specifications when shielded
cables are used for external wiring. We recommend the use of shielded cables. This
kind of cable is available from Advantech. Please contact your local supplier for
ordering information.
FCC Class A
Note: This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Opera-
tion of this equipment in a residential area is likely to cause harmful interference in
which case the user will be required to correct the interference at his own expense.
Technical Support and Assistance
1. Visit the Advantech web site at http://support.advantech.com where you can find
the latest information about the product.
2. Contact your distributor, sales representative, or Advantech's customer service
center for technical support if you need additional assistance. Please have the
following information ready before you call:
–Product name and serial number
–Description of your peripheral attachments
–Description of your software (operating system, version, application software,
etc.)
–A complete description of the problem
–The exact wording of any error messages
3. This product is intended to be supplied by a listed power supply complying with
UL60950-1; rated 24VDC, 1.5A.

v SPC-515 Series User Manual
Safety Instructions
1. Read these safety instructions carefully.
2. Keep this User Manual for later reference.
3. Disconnect this equipment from any AC outlet before cleaning. Use a damp
cloth. Do not use liquid or spray detergents for cleaning.
4. For plug-in equipment, the power outlet socket must be located near the equip-
ment and must be easily accessible.
5. Keep this equipment away from humidity.
6. Put this equipment on a reliable surface during installation. Dropping it or letting
it fall may cause damage.
7. The openings on the enclosure are for air convection. Protect the equipment
from overheating. DO NOT COVER THE OPENINGS.
8. Make sure the voltage of the power source is correct before connecting the
equipment to the power outlet.
9. Position the power cord so that people cannot step on it. Do not place anything
over the power cord.
10. All cautions and warnings on the equipment should be noted.
11. If the equipment is not used for a long time, disconnect it from the power source
to avoid damage by transient overvoltage.
12. Never pour any liquid into an opening. This may cause fire or electrical shock.
13. Never open the equipment. For safety reasons, the equipment should be
opened only by qualified service personnel.
14. If one of the following situations arises, get the equipment checked by service
personnel:
The power cord or plug is damaged.
Liquid has penetrated into the equipment.
The equipment has been exposed to moisture.
The equipment does not work well, or you cannot get it to work according to
the user's manual.
The equipment has been dropped and damaged.
The equipment has obvious signs of breakage.
15. DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT WHERE THE
STORAGE TEMPERATURE MAY GO BELOW -20° C (-4° F) OR ABOVE 60° C
(140° F). THIS COULD DAMAGE THE EQUIPMENT. THE EQUIPMENT
SHOULD BE IN A CONTROLLED ENVIRONMENT.
16. CAUTION: DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY
REPLACED. REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE
RECOMMENDED BY THE MANUFACTURER, DISCARD USED BATTERIES
ACCORDING TO THE MANUFACTURER'S INSTRUCTIONS.
The sound pressure level at the operator's position according to IEC 704-1:1982 is
no more than 70 dB (A).
DISCLAIMER: This set of instructions is given according to IEC 704-1. Advantech
disclaims all responsibility for the accuracy of any statements contained herein.
Caution! Danger of explosion if battery is incorrectly replaced. Replace only with
the same or equivalent type recommended by the manufacturer. Dis-
pose of used batteries according to the manufacturer's instructions.

SPC-515 Series User Manual vi

vii SPC-515 Series User Manual
Contents
Chapter 1 General Information ............................1
1.1 Introduction ............................................................................................... 2
1.2 Packing List............................................................................................... 2
1.3 Specifications............................................................................................ 3
1.3.1 System Kernel............................................................................... 3
1.3.2 I/O Ports........................................................................................ 3
1.3.3 Safety and Environment................................................................ 3
1.4 LCD Specifications.................................................................................... 3
1.5 Touchscreen Specifications ...................................................................... 4
1.6 Power ........................................................................................................ 4
1.7 I/O Ports Arrangement .............................................................................. 4
Figure 1.1 SPC-200 Rear View- I/O Port Arrangement ............... 4
1.8 VESA Mounting......................................................................................... 5
Figure 1.2 VESA Mounting .......................................................... 5
1.9 Dimensions and Cutout............................................................................. 6
Figure 1.3 SPC-218 Dimensions ................................................. 6
Chapter 2 System Setup.......................................7
2.1 System Setup............................................................................................ 8
Figure 2.1 Unpack the Package .................................................. 8
Figure 2.2 Pin Definition of Power Connector.............................. 8
Figure 2.3 Power Receptor with M12 Connector......................... 9
2.2 Installing the Drivers................................................................................ 10
2.2.1 Installation of Touch Screen Driver............................................. 10
2.2.2 Installation of Watchdog Driver ................................................... 10
2.2.3 Installation of Graphic Driver....................................................... 12
2.2.4 Installation of LAN Driver ............................................................ 14
2.3 Wake up from Suspend Mode................................................................. 15
Chapter 3 Features in Windows Embedded .....17
3.1 Features in Windows Embedded ............................................................ 18
3.2 EWF ........................................................................................................ 18
3.3 HORM ..................................................................................................... 18
Appendix A M12 connector I/O pin definition......19
A.1 LAN1 / LAN2 Pin Definition with M12 Connectors .................................. 20
A.2 RS-232 Pin Definition with M12 Connector............................................. 20
A.3 USB Pin Definition with M12 Connector.................................................. 20
A.4 Power Input Pin Definition with M12 Connector...................................... 21
Appendix B UI Operating Process ........................23
B.1 UI Operating Process.............................................................................. 24
Table B.1: Status Indicator Table............................................... 24
Table B.2: Button Code Hotkeys................................................ 29

SPC-515 Series User Manual viii

Chapter 1
1General Information

SPC-515 Series User Manual 2
1.1 Introduction
SPC-515 is a 15" fully sealed stainless steel multi-touch panel PC. It has an all round
IP69k and 304L stainless steel housing which makes it suitable for food & beverage
or pharmaceutical industries. With great CPU performance and intuitive multi-touch
support, it can be used as either a data visualization gateway or a control panel.
SPC-515 is EN 1672-2 compliant to fulfill strict hygiene requirements and the
enhanced front glass touch screen is rugged and shatter resistant.
Key features:
15" XGA TFT LED LCD display
Intel Skylake Intel® Core™ U-series processor with independent GPU,
advanced graphical performance
PCT multi-touch
Built-in function and home key button used for intuitive UI
Waterproof M12 connectors for I/O
Supports Mini-PCIe expansion slot
Front LED indicator shows operating status
Fanless passive cooling
1.2 Packing List
4 x VESA mount screws
1 x Registration and warranty card
1 x Simplified chinese manual
1 x China ROHS list

3 SPC-515 Series User Manual
Chapter 1 General Information
1.3 Specifications
1.3.1 System Kernel
CPU: Intel Core i3 6100U processor
BIOS: AMI UEFI 128 Mbit
VGA: Intel HD Graphics 620/520/510 (Celeron)
Memory: 8GB SO-DIMM DDR3; DRAM
LAN: 10/100/1000Base-T x 2 (connection:M12 A-coding, 8-pin female)
Watchdog Timer: 1 ~ 255 sec (system)
Expansion Slots: Full-size Mini PCI-E x 1 (optional)
Storage: 2.5" SATA HDD x 1(optional)
OS: Microsoft® Win 10 / Linux
1.3.2 I/O Ports
1 Serial Port: RS-232 x 1 (connection:M12 A-coding, 8-pin male)
2 USB Port: USB 2.0 x 2 (connection:M12 A-coding, 8-pin female)
1.3.3 Safety and Environment
Safety
FCC Class A
CE certificated
Environment
Operating Temperature: 0 ~ 50 °C (32 ~ 122 °F)
Storage Temperature: -20 ~ 60°C (-4 ~ 140°F)
Humidity: 40°C @ 10~95% relative humidity (non-condensing, test times:
48hrs)
Vibration: With SSD: 3 Grms (5 ~ 500 Hz) (operating, random vibration)
1.4 LCD Specifications
SPC-515
Display Type XGA LED LCD
Size (diagonal) 15"
Maximum Resolution 1024 x 768
Maximum Colors 16.7M
Viewing Angle 176° / 176°
Luminance (cd / m2) 300
Backlight LED
Note! There might be several bright or dark pixels on the LCD. This phenome-
non is normal in today’s LCD manufacturing.

SPC-515 Series User Manual 4
1.5 Touchscreen Specifications
Touch Type: Projected capacitive
Base Glass Construction: Tempered glass
Light Transmission: ≥88% (measured by BYK-Gardner at 550nm, and the test
method accorded to ASTM D1003)
Controller: USB Interface
1.6 Power
Input Voltage: 24VDC (Typical)
Power Consumption: 60W (Typical)
This product is intended to be supplied by a listed power adapter or DC power
source, rated 24Vdc, 2.5A minimum and Tma 55°C minimum, if you need further
assistance, please contact Advantech for further information.
1.7 I/O Ports Arrangement
The arrangement of the I/O ports is shown in Figure 1.1.
Figure 1.1 SPC-200 Rear View- I/O Port Arrangement

5 SPC-515 Series User Manual
Chapter 1 General Information
1.8 VESA Mounting
The SPC-200 has been designed with support for the VESA mount standard which
supports 100mm standard VESA dimension holes (Refer to figure 1.2.). Use M4
screws (Length 8mm to 10 mm).
Figure 1.2 VESA Mounting
Warning! Use suitable mounting apparatus to avoid risk of injury.

SPC-515 Series User Manual 6
1.9 Dimensions and Cutout
SPC-515
Weight: 10kg
Dimensions (W x H x D):
–389.6 x 313.7 x 56 mm (15.33 x 12.34 x 2,2 in)
Figure 1.3 SPC-218 Dimensions
100
10076

Chapter 2
2System Setup

SPC-515 Series User Manual 8
2.1 System Setup
You can easily get SPC started by following the below steps.
1. Unpack the SPC package. Check the packing list at the beginning of this man-
ual to make sure all items have been included.
Figure 2.1 Unpack the Package
2. Connect the power connector with M12 connector to the 24 VDC power lines.
The power lines can either be of some power adapter or in-house power source.
3.
Figure 2.2 Pin Definition of Power Connector
Power Input Pin Number Signal (Male)
M12-A-5P-M
Power
1 DC 24V-
2 DC 24V-
3 DC 24V+
4 DC24V+
5 F_GND

9 SPC-515 Series User Manual
Chapter 2 System Setup
Figure 2.3 Power Receptor with M12 Connector
4. Plug the power lines into the system power receptor with M12 connector.
5. Power on the system.

SPC-515 Series User Manual 10
2.2 Installing the Drivers
2.2.1 Installation of Touch Screen Driver
SPC-218/221 will use the built-in PCT touch driver in the OS if operating under Win-
dows 10.
2.2.2 Installation of Watchdog Driver
1. Enter into Watchdog folder, double click AdvWDT icon, and then click Next
under InstallShield Wizard window.
2. Select "Advantech [SCH311X] WDT” and click “Next”.
3. Click “Install”.

11 SPC-515 Series User Manual
Chapter 2 System Setup
4. Click “Finish” to finish the installation.
5. Select “Yes, I want to restart my computer now” and click “OK”.
6. After installing Watchdog driver, a "Watchdog Service Configuration" icon will
show in control panel.

SPC-515 Series User Manual 12
7. Double click the "Watchdog Service Configuration" icon, and you can configure
the Watchdog timer function.
2.2.3 Installation of Graphic Driver
1. Enter into TS folder, enter into” graphic driver for Windows 7" Driver folder and
double click setup icon, and then click Next under setup wizard window.
2. Click Install.