Advantech TPC-300 Series User manual

User Manual
TPC-300 Series
TPC-B510
Industrial Touch Panel Computer with
8th Gen. Intel® Core™ Processor

TPC-300 Series, TPC-B510 User Manual ii
Copyright
The documentation and the software included with this product are copyrighted 2020
by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right
to make improvements in the products described in this manual at any time without
notice. No part of this manual may be reproduced, copied, translated or transmitted
in any form or by any means without the prior written permission of Advantech Co.,
Ltd. Information provided in this manual is intended to be accurate and reliable. How-
ever, Advantech Co., Ltd. assumes no responsibility for its use, nor for any infringe-
ments of the rights of third parties, which may result from its use.
Acknowledgments
Intel and Pentium are trademarks of Intel Corporation.
Microsoft Windows and MS-DOS are registered trademarks of Microsoft Corp.
All other product names or trademarks are properties of their respective owners.
This manual is applicable to the following models:
TPC-312-R833A
TPC-312-R853A
TPC-312-R873A
TPC-315-R833A
TPC-315-R853A
TPC-315-R873A
TPC-317-R833A
TPC-317-R853A
TPC-317-R873A
TPC-324W-P833A
TPC-324W-P853A
TPC-324W-P873A
TPC-B510-833AE
TPC-B510-853AE
TPC-B510-873AE
Part No. 2003031500 Edition 1
Printed in China October 2020

iii TPC-300 Series, TPC-B510 User Manual
Product Warranty (2 years)
Advantech warrants the original purchaser that each of its products will be free from
defects in materials and workmanship for two years from the date of purchase.
This warranty does not apply to any products that have been repaired or altered by
persons other than repair personnel authorized by Advantech, or that have been sub-
ject to misuse, abuse, accident, or improper installation. Advantech assumes no lia-
bility under the terms of this warranty as a consequence of such events.
Because of Advantech’s high quality-control standards and rigorous testing, most
customers never need to use our repair service. If an Advantech product is defective,
it will be repaired or replaced free of charge during the warranty period. For out-of-
warranty repairs, customers are billed according to the cost of replacement materials,
service time, and freight. Please consult your dealer for more details.
If you believe your product is defective, follow the steps outlined below.
1. Collect all the information about the problem encountered. (For example, CPU
speed, Advantech products used, other hardware and software used, etc.) Note
anything abnormal and list any onscreen messages displayed when the prob-
lem occurs.
2. Call your dealer and describe the problem. Have your manual, product, and any
relevant information readily available.
3. If your product is diagnosed as defective, obtain a return merchandize authori-
zation (RMA) number from your dealer. This allows us to process your return
more quickly.
4. Carefully pack the defective product, a completed Repair and Replacement
Order Card, and a proof of purchase date (such as a photocopy of your sales
receipt) into a shippable container. Products returned without proof of purchase
date are not eligible for warranty service.
5. Write the RMA number visibly on the outside of the package and ship it prepaid
to your dealer.
Declaration of Conformity
CE
This product has passed the CE test for environmental specifications when shielded
cables are used for external wiring. We recommend the use of shielded cables. This
type of cable is available from Advantech. Contact your local supplier for ordering
information.
FCC Class A
This equipment has been tested and found to comply with the limits for a Class A dig-
ital device, pursuant to part 15 of the FCC Rules. These limits are designed to pro-
vide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Opera-
tion of this equipment in a residential area is likely to cause harmful interference. In
such cases, users are required to correct the interference at their own expense.\

TPC-300 Series, TPC-B510 User Manual iv
甲類警語
警告使用者：這是甲類資訊產品，在居住的環境中使用時，可能會造成射頻干擾，在
這種情況下，使用者會被要求採取某些適當對策。
Technical Support and Assistance
1. Visit the Advantech website at www.advantech.com/support to obtain the latest
product information.
2. Contact your distributor, sales representative, or Advantech customer service
center for technical support if you need additional assistance. Please have the
following information ready before calling:
–Product name and serial number
–Description of your peripheral attachments
–Description of your software (operating system, version, application software,
etc.)
–A complete description of the problem
–The exact wording of any error messages
Warnings, Cautions, and Notes
Warning! Warnings indicate conditions that if not observed can cause personal
injury!
Caution! Cautions are included to prevent hardware damage and data losses.
For example,
“Batteries are at risk of exploding if incorrectly installed. Replace the bat-
tery only with the same or equivalent type as recommended by the man-
ufacturer. Discard used batteries according to the manufacturer's
instructions.”
Note! Notes provide additional optional information.

v TPC-300 Series, TPC-B510 User Manual
Safety Instructions
1. Read these safety instructions carefully.
2. Retain this user manual for future reference.
3. Disconnect the equipment from all power outlets before cleaning. Use only a
damp cloth for cleaning. Do not use liquid or spray detergents.
4. For pluggable equipment, the power outlet socket must be located near the
equipment and easily accessible.
5. Protect the equipment from humidity.
6. Do not expose the equipment to direct sunlight, or install the equipment in an
environment with direct sunlight, as this may cause damage.
7. Place the equipment on a reliable surface during installation. Dropping or letting
the equipment fall may cause damage.
8. The openings on the enclosure are for air convection. Protect the equipment
from overheating. Do not cover the openings.
9. Ensure that the voltage of the power source is correct before connecting the
equipment to a power outlet.
10. Position the power cord away from high-traffic areas. Do not place anything over
the power cord.
11. All cautions and warnings on the equipment should be noted.
12. If the equipment is not used for a long time, disconnect it from the power source
to avoid damage from transient overvoltage.
13. Be aware that the rear cover may become quite hot during operation. To avoid
scalding or personal injury, do not touch the rear cover.
14. Never pour any liquid into an opening. This may cause fire or electric shock.
15. Never open the equipment. For safety reasons, the equipment should be
opened only by qualified service personnel.
16. If one of the following occurs, have the equipment checked by qualified service
personnel:
The power cord or plug is damaged.
Liquid has penetrated the equipment.
The equipment has been exposed to moisture.
The equipment is malfunctioning or does not work according to the user
manual.
The equipment has been dropped and damaged.
The equipment shows obvious signs of breakage.
17. Do not leave the equipment in an environment with a storage temperature of
below -20 °C (-4 °F) or above 60 °C (140 °F) as this may cause damage. The
equipment should be located in a controlled environment.
18. Batteries are at risk of exploding if incorrectly replaced or installed. Replace only
with the same or equivalent type recommended by the manufacturer. Discard
used batteries according to the manufacturer’s instructions.
19. Danger d'explosion si la pile est remplacée de fa?on incorrecte. Remplacez
seulement avec le même type ou équivalent recommandé par le fabricant. Dis-
poser des piles usagées selon les instructions du fabricant.
20. The equipment is intended to be installed on a wall or in a cabinet with the fol-
lowing conditions: access is restricted to service personnel or users who are
aware of all precautions that must be taken when using the equipment; access
can only be gained with the use of a key or other means of security; access is
controlled by the authority responsible for the location.
21. In accordance with the IEC 704-1:1982 specifications, the sound pressure level
at the operator’s position does not exceed 70 dB (A).

TPC-300 Series, TPC-B510 User Manual vi
22. DISCLAIMER: These instructions are provided in accordance with IEC 704-1
specifications. Advantech disclaims all responsibility for the accuracy of any
statements contained herein.
Document Feedback
To assist us with improving this manual, we welcome all comments and constructive
criticism. Please send all feedback in writing to [email protected].

vii TPC-300 Series/TPC-B510 User Manual
Contents
Chapter 1 General Information ............................1
1.1 Introduction ............................................................................................... 2
1.2 Specifications............................................................................................ 2
1.2.1 General ......................................................................................... 2
1.2.2 System Hardware ......................................................................... 3
1.2.3 LCD Panel..................................................................................... 4
1.2.4 Touchscreen ................................................................................. 5
1.2.5 Safety and Environmental............................................................. 5
1.2.6 Operating Systems ....................................................................... 6
1.3 I/O Layout.................................................................................................. 6
Figure 1.1 I/O Layout ................................................................... 6
1.4 Dimensions and Cutouts ........................................................................... 7
1.4.1 TPC-312 Series ............................................................................ 7
Figure 1.2 TPC-312 Dimensions ................................................. 7
1.4.2 TPC-315 Series ............................................................................ 8
Figure 1.3 TPC-315 Dimensions ................................................. 8
1.4.3 TPC-317 Series ............................................................................ 9
Figure 1.4 TPC-317 Dimensions ................................................. 9
1.4.4 TPC-324W Series ....................................................................... 10
Figure 1.5 TPC-324W Dimensions ............................................ 10
1.4.5 TPC-B510 Series ........................................................................ 11
Figure 1.6 TPC-B510 Dimensions ............................................. 11
Chapter 2 Installation..........................................13
2.1 Transport and Unpacking........................................................................ 14
2.1.1 Transport..................................................................................... 14
2.1.2 Unpacking ................................................................................... 14
Figure 2.1 Power Connector and Power Lines .......................... 14
Figure 2.2 Power Connector...................................................... 15
2.2 Panel Mounting ....................................................................................... 15
Figure 2.3 Panel Mounting – Positioning ................................... 15
Figure 2.4 Panel Mounting – Clamp Attachment ....................... 16
Figure 2.5 Panel Mounting – Clamp Fixing................................ 16
2.3 VESA Mounting....................................................................................... 17
Figure 2.6 VESA Mounting ........................................................ 17
2.4 Cabinet Installation and Grounding......................................................... 17
2.4.1 Cabinet Installation ..................................................................... 18
Figure 2.7 Cabinet Installation ................................................... 18
2.4.2 System Wiring............................................................................. 18
Figure 2.8 System Wiring Diagram............................................ 19
2.5 Power/Digital Ground and Earth/Ground ................................................ 20
Figure 2.9 TPC Chassis and Power Supply .............................. 20
Chapter 3 Windows Embedded Features .........21
3.1 Windows Embedded Features ................................................................ 22
3.2 Unified Write Filter (UWF) ....................................................................... 22
Figure 3.1 Enabling UWF - Step 1............................................. 22
Figure 3.2 Enabling UWF - Step 2............................................. 23
3.3 UWF Overlay........................................................................................... 23
Figure 3.3 UWF Overlay Settings - Step 1 ................................ 24
Figure 3.4 UWF Overlay Settings - Step 2 ................................ 24

TPC-300 Series/TPC-B510 User Manual viii
Figure 3.5 UWF Overlay Settings - Step 3 ................................ 25
Figure 3.6 UWF Overlay Settings - Step 4 ................................ 25
Figure 3.7 UWF Overlay Settings - Step 5 ................................ 26
3.4 HORM ..................................................................................................... 26
Figure 3.8 HORM Settings - Step 1........................................... 27
Figure 3.9 HORM Settings - Step 2........................................... 27
Appendix A Serial Port Settings........................... 29
A.1 Jumper and Connector Locations ........................................................... 30
A.1.1 Board Layout .............................................................................. 30
Figure A.1 Board Layout - Top View.......................................... 30
Figure A.2 Board Layout - Underside View................................ 30
Table A.1: Connectors and Jumpers ......................................... 30
A.2 Jumper Settings, and Descriptions ......................................................... 31
A.2.1 CMOS Clear Function (JP1) ....................................................... 31
Table A.2: CMOS Clear Function (JP1)..................................... 31
A.3 Connector Pin Definition ......................................................................... 31
A.3.1 SATA Connector (CN37) ............................................................ 31
Table A.3: SATA Connector (CN37).......................................... 31
A.3.2 SATA Power Connector (CN24) ................................................. 32
Table A.4: SATA Power Connector (CN24)............................... 32
A.3.3 Mini PCIe Slot (CN31 MINIPCIE) ............................................... 33
Table A.5: Mini PCIe Slot (CN31 MINIPCIE) ............................. 33
A.3.4 M.2 (M-Key) Slot (CN17 NVMe/SATA Storage) ......................... 34
Table A.6: M.2 (M-Key) Slot (CN17 NVMe/SATA Storage)....... 34
A.3.5 M.2 (B-Key) Slot (CN26 PCIe/USB/SATA) ................................. 35
Table A.7: M.2 (B-Key) Slot (CN26 PCIe/USB/SATA)............... 35
A.3.6 Power Input Connector (CN1) .................................................... 36
Table A.8: Power Input Connector (CN1) .................................. 36
A.3.7 LAN RJ45 Connector (CN9) ....................................................... 36
Table A.9: LAN RJ45 Connector (CN9).................................... 36
Table A.10:LED .......................................................................... 37
A.3.8 USB Connectors (CN19, CN20, CN21) ..................................... 37
Table A.11: USB Connector (CN19, CN20)................................ 37
Table A.12:USB Connector (CN21)............................................ 38
A.3.9 COM1 RS-232/422/485 Connector (COM1)............................... 38
Table A.13:COM1 RS-232/422/485 Connector (COM1) ............ 38
A.3.10 COM2 RS-232 Connector (COM2)............................................ 39
Table A.14:COM2 RS-232 Connector (COM2) .......................... 39
A.3.11 DisplayPort Connector (CN36) ................................................. 39
Table A.15:DisplayPort Connector (CN36)................................. 39
A.3.12 Audio Connector (CN38) .......................................................... 40
Table A.16: Audio Connector (CN38) ......................................... 40
A.3.13 SIM Connector (CN10) .............................................................. 41
Table A.17:SIM Connector (CN10)............................................. 41
Appendix B Driver Installation & Configuration . 43
B.1 Intel Chipset Software Installation Utility................................................. 44
B.2 Intel Graphics Driver Installation ............................................................. 46
B.3 LAN Driver Installation ............................................................................ 49
B.4 Intel Management Engine Installation..................................................... 52
B.5 Touch Driver Installation ......................................................................... 55
Appendix C BIOS Setup ........................................ 59
C.1 Entering Setup ........................................................................................ 60

ix TPC-300 Series/TPC-B510 User Manual
C.1.1 Main Setup.................................................................................. 61
C.1.2 Advanced BIOS Features Setup................................................. 62
C.1.3 Chipset Configuration ................................................................. 71
C.1.4 Security ....................................................................................... 73
C.1.5 Boot............................................................................................. 74
C.1.6 Save & Exit ................................................................................. 75

TPC-300 Series/TPC-B510 User Manual x

Chapter 1
1General Information

TPC-300 Series/TPC-B510 User Manual 2
1.1 Introduction
The TPC-300 series touch panel computers are human machine interfaces (HMIs)
equipped with an Intel® Core™ i3-8145UE dual-core (2.20 GHz)/i5-8365UE quad-
core (1.60 GHz)/i7-8665UE quad-core (1.70 GHz) processor and feature displays
that range from 12” to 23.8” in size.
TPC-B510 is a modular computing box that features an Intel® Core™ i3-8145UE
dual-core (2.20 GHz)/i5-8365UE quad-core (1.60 GHz)/i7-8665UE quad-core (1.70
GHz) processor that can be flexibly integrated with Advantech’s FPM display mod-
ules according to specific usage requirements. For information about the FPM dis-
play module series, visit the Advantech website.
Key Features
True-Flat Touchscreen
True-flat touchscreen with IP66-rated ingress protection
Fanless Design
The fanless system design, combined with a low-power processor, minimizes
the accumulation and circulation of dust and other contaminants
Dual-Channel DDR4 SODIMM
Dual memory slots support up to 32GB of memory
NVMe High-Speed Storage
M.2 (M key) connector supports NVMe PCIe x4 for high-speed storage
iDoor Technology
Supports Advantech’s iDoor technology for integrating additional I/O, isolated
DI/O, and fieldbus modules
DisplayPort and Audio Line-Out/Mic-In
Supports multimedia
TFT LED LCD Display
The TFT LED LCD display provides high-quality imaging, ideal for industrial
applications
Wide Operating Temperature Range
Isolation Protection
1.2 Specifications
1.2.1 General
BIOS: AMI UEFI BIOS
Certification: BSMI, CCC, CE, FCC Class A, CB/UL
Cooling System: Fanless design
Dimensions (L x W x H):
–TPC-312: 410.4 x 343.4 x 68 mm/16.16 x 13.52 x 2.68 in
–TPC-315: 383.2 x 307.3 x 66.5 mm/15.09 x 12.1 x 2.62 in
–TPC-317: 410.4 x 343.4 x 68 mm/16.16 x 13.52 x 2.68 in
–TPC-324W: 595.9 x 374.1 x 70 mm/23.46 x 14.73 x 2.76 in
–TPC-B510: 269 x 203 x 40 mm/10.6 x 8.0 x 1.6 in
Enclosure:
–Front bezel: Die cast aluminum alloy
–Rear housing: Die cast aluminum alloy
Mount Options: VESA, desktop, wall, or panel
Power Input: 24 VDC ± 20%

3 TPC-300 Series/TPC-B510 User Manual
Chapter 1 General Information
Watchdog Timer: 15 ~ 255 sec (system)
Weight (Net):
–TPC-315: 5.8 kg/12.79 lb
–TPC-324W: 9.3 kg/20.5 lb
–TPC-B510: 2.6 kg/5.73 lb
Power Consumption:
This product is intended to be supplied by a IEC/UL 60950-1/IEC/UL 62368-1-
recognized limited power source that is rated as follows:
–TPC-315: 36.79 W (typical)
24 VDC, minimum 5A, minimum operating temperature 55 °C/131 °F
–TPC-324W: 56.31 W (typical)
24 VDC, minimum 5A, minimum operating temperature 50 °C/122 °F
–TPC-B510: 28.64 W (typical)
24 VDC, minimum 5A, minimum operating temperature 55 °C/131°F
1.2.2 System Hardware
CPU: 8th gen. Intel® Core™ i
Memory: 8GB DDR4 SODIMM (built-in)
LAN: 2 x 10/100/1000BASE-T
Expansion Slot: 1 x Full-size mini PCIe
Storage Slots:
–1 x M.2 (M-key): 2280 SATA; NVMe PCIe x4
–1 x M.2 (B-key): 2242 SATA; 3042/3052 LTE/5G slot 7
–1 x 2.5” SATA SSD
I/O Ports:
–2 x RS-232/422/485
–1 x USB 2.0
–4 x USB3.2 (Gen 2)
–1 x iDoor slot
–1 x DisplayPort (video output)
–1 x Audio Line-Out/Mic-In
Model Number Processor
TPC-312-R833A Intel® Core™ i3- 8145UE, 2.20 GHz
TPC-312-R853A Intel® Core™ i5-8365UE, 1.60 GHz
TPC-312-R873A Intel® Core™ i7-8665UE, 1.70 GHz
TPC-315-R833A Intel® Core™ i3- 8145UE, 2.20 GHz
TPC-315-R853A Intel® Core™ i5-8365UE, 1.60 GHz
TPC-315-R873A Intel® Core™ i7-8665UE, 1.70 GHz
TPC-317-R833A Intel® Core™ i3- 8145UE, 2.20 GHz
TPC-317-R853A Intel® Core™ i5-8365UE, 1.60 GHz
TPC-317-R873A Intel® Core™ i7-8665UE, 1.70 GHz
TPC-324W-P833A Intel® Core™ i3- 8145UE, 2.20 GHz
TPC-324W-P853A Intel® Core™ i5-8365UE, 1.60 GHz
TPC-324W-P873A Intel® Core™ i7-8665UE, 1.70 GHz
TPC-B510-833AE: Intel® Core™ i3- 8145UE, 2.20 GHz
TPC-B510-853AE: Intel® Core™ i5-8365UE, 1.60 GHz
TPC-B510-873AE: Intel® Core™ i7-8665UE, 1.70 GHz

TPC-300 Series/TPC-B510 User Manual 4
1.2.3 LCD Panel
TPC-312
Display Type: XGA TFT LED LCD
Display Size: 12” (4:3)
Max. Resolution: 1024x768
Max. Color: 16.2M
Luminance (cd/m2): 300
Viewing Angle (H°/V°): 178°/178°
Backlight Life: 50,000 hrs
Contrast Ratio: 1000:1
TPC-315
Display Type: XGA TFT LED LCD
Display Size: 15” (4:3)
Max. Resolution: 1024x768
Max. Color: 16.7M
Luminance (cd/m2): 300
Viewing Angle (H°/V°): 176°/176°
Backlight Life: 70,000 hrs
Contrast Ratio: 2000:1
TPC-317
Display Type: SXGA TFT LED LCD
Display Size: 17” (4:3)
Max. Resolution: 1280x1024
Max. Color: 16.7M
Luminance (cd/m2): 300
Viewing Angle (H°/V°): 160°/140°
Backlight Life: 50,000 hrs
Contrast Ratio: 800:1
TPC-324W
Display Type: FHD TFT LED LCD
Display Size: 23.8” (16:9)
Max. Resolution: 1920x1080
Max. Color: 16.7M
Luminance (cd/m2): 350
Viewing Angle (H°/V°): 178°/178°
Backlight Life: 50,000 hrs
Contrast Ratio: 1000:1

5 TPC-300 Series/TPC-B510 User Manual
Chapter 1 General Information
1.2.4 Touchscreen
TPC-312
Lifespan: 36 million touches at a single point
Light Transmission: Above 75%
Resolution: Linearity
Type: 5-wire analog resistive
TPC-315
Lifespan: 36 million touches at a single point
Light Transmission: Above 75%
Resolution: Linearity
Type: 5-wire analog resistive
TPC-317
Lifespan: 36 million touches at a single point
Light Transmission: Above 75%
Resolution: Linearity
Type: 5-wire analog resistive
TPC-324W
Light Transmission: 90% ± 3%
Type: Projected capacitive
1.2.5 Safety and Environmental
1.2.5.1 Safety
FCC Class A
CE certified
1.2.5.2 Environmental
TPC-312
Humidity: 10 ~ 95% RH @ 40 °C/104 °F, non-condensing
Ingress Protection: IP66-rated front panel
Operating Temperature: -10 ~ 55 °C/14 ~ 131 °F (without airflow)
Storage Temperature: -20 ~ 70 °C/-4 ~ 158 °F
Vibration Protection: With SSD: 1 Grms (5 ~ 500 Hz) (operating, random)
TPC-315
Humidity: 10 ~ 95% relative humidity @ 40 °C/104 °F, non-condensing
Ingress Protection: IP66-rated front panel
Operating Temperature: -10 ~ 55 °C/14 ~ 131°F (without airflow)
Storage Temperature: -20 ~ 70 °C/-4 ~ 158 °F
Vibration Protection: With SSD: 1 Grms (5 ~ 500 Hz) (operating, random)
Note! The TPC-B510 modular computing box does not come with a display or
touch panel.

TPC-300 Series/TPC-B510 User Manual 6
TPC-317
Humidity: 10 ~ 95% RH @ 40 °C/104 °F, non-condensing
Ingress Protection: IP66-rated front panel
Operating Temperature: -10 ~ 55 °C/14 ~ 131 °F (without airflow)
Storage Temperature: -20 ~ 70 °C/-4 ~ 158 °F)
Vibration Protection: With SSD: 1 Grms (5 ~ 500 Hz) (operating, random)
TPC-324W
Humidity: 10 ~ 95% relative humidity @ 40 °C/104 °F, non-condensing
Ingress Protection: IP66-rated front panel
Operating Temperature: -10 ~ 50 °C/14 ~ 122 °F (without airflow)
Storage Temperature: -20 ~ 70 °C/-4 ~ 158 °F
Vibration Protection: With SSD: 1 Grms (5 ~ 500 Hz) (operating, random)
TPC-B510
Humidity: 10 ~ 95% relative humidity @ 40 °C/104 °F, non-condensing
Ingress Protection: IP66-rated front panel
Operating Temperature: -10 ~ 55 °C/14 ~ 131 °F (without airflow)
Storage Temperature: -20 ~ 70 °C/-4 ~ 158 °F
Vibration Protection: With SSD: 1 Grms (5 ~ 500 Hz) (operating, random)
1.2.6 Operating Systems
Windows 10
Android
AdvLinux
1.3 I/O Layout
The I/O the layout for TPC-300 Series and TPC-B510 is shown in Figure 1.1.
A. HDD/SSD bay (default) F. USB 2.0
B. iDoor slot G. LAN (10/100/1000)
C. RS-232/422/485 H. USB 3.2 (Gen2)
D. Audio Line-Out/Mic-In I. Power input
E. DisplayPort
Figure 1.1 I/O Layout

7 TPC-300 Series/TPC-B510 User Manual
Chapter 1 General Information
1.4 Dimensions and Cutouts
1.4.1 TPC-312 Series
Weight (Net): TBD
Dimensions (L x W x H): 410.4 x 343.4 x 68 mm/16.16 x 13.52 x 2.68 in
Cutout Dimensions (L x H): 303 x 229 mm/11.93 x 9.02 in
Figure 1.2 TPC-312 Dimensions
311.8
247.2
186.3
238
7
67
301.56
227.56

TPC-300 Series/TPC-B510 User Manual 8
1.4.2 TPC-315 Series
Weight (Net): 5.8 kg/12.79 lb
Dimensions (L x W x H): 383.2 x 307.3 x 66.5 mm/15.09 x 12.1 x 2.62 in
Cutout Dimensions (L x H): 374.5 x 298.5 mm/14.74 x 11.75 in
Figure 1.3 TPC-315 Dimensions
383.2
307.3
230.1
306.1
7
66.5
100
100
372.89
296.89

9 TPC-300 Series/TPC-B510 User Manual
Chapter 1 General Information
1.4.3 TPC-317 Series
Weight (Net): TBD
Dimensions (L x W x H): 410.4 x 343.4 x 68 mm/16.16 x 13.52 x 2.68 in
Cutout Dimensions (L x H): 401.3 x 334.8 mm/15.80 x 13.18 in
Figure 1.4 TPC-317 Dimensions
339.9
272.9
410.4
343.4
7
68
399.2
332.7
100
100

TPC-300 Series/TPC-B510 User Manual 10
1.4.4 TPC-324W Series
Weight (Net): 9.3 kg/20.5 lb
Dimensions (L x W x H): 595.9 x 374.1 x 70 mm/23.46 x 14.73 x 2.76 in
Cutout Dimensions (L x W): 587 x 365.3 mm/23.11 x 14.38 in
Figure 1.5 TPC-324W Dimensions
7
585.55