ADX FIREPOWER ADV. 24 User manual

FIREPOWER
ADV. 24
RGB GAMING MOUSE
INSTRUCTION MANUAL
ADXM1224

Contents
Safety Warnings................................................................................. 3
Product Overview.............................................................................. 4
Detachable Buttons........................................................................... 5
Mouse DPI Settings ........................................................................... 5
RGB Light Settings............................................................................. 6
Software Installation......................................................................... 6
User Interface..................................................................................... 6
User Interface- Customise................................................................. 7
User Interface- Light.......................................................................... 7
User Interface - Performance............................................................ 8
User Interface- Macro........................................................................ 8
User Interface - Light Eect .............................................................. 9
System Requirements ....................................................................... 9
Hints and Tips................................................................................... 10
Specications................................................................................... 10

3
Safety Warnings
• Read all the instructions carefully before using the unit and
keep them for future reference.
• Retain the manual. If you pass the unit onto a third party, make
sure to include this manual.
Never point the optical sensor towards the face, particularly
the eyes, to avoid possible injury.
• While the mouse is functioning, the optical light is visible to the
naked eye. Avoid looking directly into the emitter hole while
the mouse is active.
• Your product complies with CE rules.
• This product has no serviceable parts. Use of controls or
adjustments of procedures other than the Instruction Manual
may result in danger.

4
Thank you for purchasing your new product.
We recommend that you spend some time reading this
instruction manual in order that you fully understand all
the operational features it oers. You will also nd some
hints and tips to help you resolve any issues.
Read all the safety instructions carefully before use and
keep this instruction manual for future reference.
1. Right Button
2. Scroll Wheel
3. Left Button
4. DPI Button
Press repeatedly to select dierent dpi.
5. Forward (R2) Button
6. Forward (L2) Button
7. Backward (R1) Button
8. Backward (L1) Button
1
2
3
6 8
Product Overview
4 5 7

5
Detachable Buttons
The forward (L2, R2) and backward (L1, R1) buttons are
detachable from the unit. Replace the respective buttons back if
they are separated from the unit.
Mouse DPI Settings
Press the DPI button on the mouse repeatedly to select desired
resolution. Related LED colour will ash for 2 seconds.
Colour DPI
Red 800
Orange 1600
Yellow 3200
Green 6400
Blue 8000
Purple 12000
L1
R1
L2
R2
While placing the buttons back to the mouse, make
sure that each button (L1, L2, R1, R2) is returned to its
corresponding slot.

6
User Interface
1. Choose ADX HUB.exe
from the desktop to
launch the software.
2. Select “Mouse“ and
then “ADXM1224“
at the bottom of the
connected device list to
enter the interface.
RGB Light Settings
Press and hold the DPI button and Backward button for about
3 seconds to switch the RGB lighting mode between Stream /
Breathing /Static / Pulse / Criss Cross / React / Random / Light
o.
Software Installation
1. Plug the unit into the USB port of your computer.
2. Download the latest gaming software from
https://downloads.adxgaming.com (under ADX HUB 2)
3. Run the software (ADX HUB 2 Setup.exe) installer.
4. Follow the installation instruction to complete the installation.
5. Choose ADX HUB 2.exe from the desktop to start the
software.

7
User Interface- Customise
1. Select Customise to
enter the setting page.
User Interface- Light
1. Select Light to enter the
Light Settings page.
2. Choose your preference
among the below:
• Mode
• Brightness
• Speed
3. Select “Apply“ to
implement your settings, or“Reset“ to reset all settings.
2. Set your preference of
the mouse buttons in
the Key Function menu.
3. You may save your own
preference in the Prole
menu.
4. Select “Apply“ to
implement your settings,
or “Reset“ to reset all settings.
Some Customise settings may not be supported. Please
check the application program of your computer.

8
User Interface - Performance
1. Select Performance to
enter the setting page.
• Select the DPI from
Level 1 to Level 6, and
then set it from 800 to
12000.
• Select the Response
Rate between 125 Hz,
250 Hz, 500 Hz and 1000 Hz.
2. Select “Apply“ to implement your settings, or“Reset“ to reset
all settings.
For Mouse Parameters, click Open Windows Mouse
Properties to open the Mouse Properties menu of your
computer.
User Interface- Macro
1. Select Macro, and the “+“
to create a New Macro
Command.
2. Press Start Recording.
3. After recording your
input command, press
Stop Recording.
4. You may edit your
recorded commands on the right menu.
5. Select “Apply“ to implement your settings, or“Reset“ to reset
all settings.

9
User Interface - Light Eect
If one more ADX gaming
device is connected, you
may synchronize their light
eect.
1. Select Light Eect, and
the devices you want to
apply the light eect.
2. Select your preferred
Lighting Settings (Mode, Brightness and Speed) and Color
Mode (Customise or Stream).
3. Select “Apply“ to implement your settings.
To reset the setting of a particular device, select a
connected device shown in the menu, and then select
Reset.
System Requirements
Operating Systems: Microsoft® Windows® 8 / 10 / 11
Hardware: 1 available USB port

10
Hints and Tips
• Make sure the USB plug is fully plugged into a USB port and
the computer is on or try to use a dierent USB port.
• If the mouse is moving erratically, change the working surface
which the mouse is operating on.
• If the software is not working properly, uninstall it and then
reboot the computer. Re-install the software.
• If the unit is not working properly, re-insert the USB plug into
the USB port.
Specications
Model ADXM1224
Operation Systems Microsoft® Windows® 8 / 10 / 11
Resolution 800 / 1600 / 3200 / 6400 / 8000 /
12000 dpi
Dimension (L × W × H) 126 × 63.5 × 39 mm
Net Weight 107 g
Features and specications are subject to change without prior
notice.

The symbol on the product or its packaging indicates that this
product must not be disposed of with your other household
waste. Instead, it is your responsibility to dispose of your waste
equipment by handing it over to a designated collection point for
the recycling of waste electrical and electronic equipment. The
separate collection and recycling of your waste equipment at the
time of disposal will help conserve natural resources and ensure that it is
recycled in a manner that protects human health and the environment.
For more information about where you can drop o your waste for recycling,
please contact your local authority, or where you purchased your product.
Windows is either trademark or registered trademark of Microsoft
Corporation in the United States and/or other countries.
All trademarks are the property of their respective owners and all rights are
acknowledged.
IB-ADXM1224-230811V1
Currys Group Limited (co. no. 504877)
1 Portal Way, London, W3 6RS, UK
EU Representative
Currys Ireland Limited (259460)
3rd Floor Oce Suite
Omni Park SC, Santry, Dublin 9, Republic of Ireland
Visit Partmaster.co.uk today for the easiest way to buy
electrical spares and accessories.
With over 1 million spares and accessories available we
can deliver direct to your door the very next day. Visit www.partmaster.
co.uk or call 0344 800 3456 (UK customers only). Calls charged at National
Rate.