Agco 8200 series User manual

6270

MASSEY FERGUSON

Tractors 8200

Models 8210-8220-8240-8250-8260-8270-8280

AGCO - SA RC B562 104 539 July 2002 - Publication No. 3378 344M1

Beauvais - France Massey Ferguson est une filiale d’AGCO Corporation

TRACTOR IDENTIFICATION

INTRODUCTION - SAFETY

PRECAUTIONS AND WARRANTY

INSTRUMENTS AND CONTROLS

OPERATION

MAINTENANCE AND ADJUSTMENTS

SPECIFICATIONS

ACCESSORIES AND OPTIONS

TROUBLESHOOTING

ELECTRIC EQUIPMENT

CONTENT

OPERATOR INSTRUCTION BOOK

Find manuals at https://best-manuals.com

OPERATOR INSTRUCTION BOOK

CHAPTER 1 - TRACTOR IDENTIFICATION ................................................1-1

1.1 - SERIAL NUMBER .............................................................................................................................. 1-5

CHAPTER 2 - INTRODUCTION-SAFETY PRECAUTIONS

AND WARRANTY .......................................................................................2-1

2.1 - INTRODUCTION ................................................................................................................................ 2-5

2.1.1 - inspection before delivery, service entry on the user’s premises and guarantee ................ 2-5

2.1.2 - Inspection before delivery, service entry on the user’s premises and guarantee ................ 2-6

2.1.3 - Guarantee procedure ............................................................................................................ 2-6

2.1.4 - Change of region .................................................................................................................. 2-6

2.1.5 - Servicing after the guarantee period .................................................................................... 2-6

2.2 - SAFETY - ALERT SYMBOL AND TERMS ......................................................................................... 2-7

2.3 - TRACTOR AND IMPLEMENT ............................................................................................................ 2-7

2.4 - A WORD TO THE OPERATOR .......................................................................................................... 2-8

2.5 - DANGER, WARNING AND CAUTION ..............................................................................................2-8

2.6 - DECALS .............................................................................................................................................. 2-8

2.7 - FOLLOW A SAFETY PROGRAM ....................................................................................................... 2-9

2.7.1 - For proper operation ............................................................................................................. 2-9

2.7.2 - Observe the following .......................................................................................................... 2-9

2.8 - ROPS-CAB .......................................................................................................................................... 2-9

2.8.1 - Cab ....................................................................................................................................... 2-9

2.8.2 - Protect yourself .................................................................................................................. 2-10

2.9 - PREPARE FOR SAFE OPERATION ................................................................................................. 2-10

2.9.1 - Know your equipment ........................................................................................................ 2-10

2.9.2 - Use all available protective and safety devices .................................................................. 2-11

2.9.3 - Check the equipment ......................................................................................................... 2-11

2.9.4 - Clean the tractor ................................................................................................................. 2-12

2.9.5 - Protect the environment ..................................................................................................... 2-12

2.10 - SERVICING THE TRACTOR ............................................................................................................ 2-12

2.11 - STARTING ........................................................................................................................................ 2-13

2.11.1 - Warn personnel before starting .......................................................................................... 2-13

2.11.2 - Mount and dismount safely ............................................................................................... 2-13

2.11.3 - Start safely .......................................................................................................................... 2-13

2.11.4 - Follow recommended starting procedures ......................................................................... 2-13

2.11.5 - Test the controls ................................................................................................................. 2-13

2.11.6 - Starting fluid ....................................................................................................................... 2-13

OPERATOR’S GENERAL

Find manuals at https://best-manuals.com

OPERATOR INSTRUCTION BOOK

2.12 - SAFETY - AFTER OPERATION ........................................................................................................ 2-14

2.12.1 - Make the right moves ........................................................................................................ 2-14

2.12.2 - Follow safe operating practices .......................................................................................... 2-14

2.12.3 - Watch out for others .......................................................................................................... 2-14

2.12.4 - Risk of overturning ............................................................................................................. 2-15

2.12.5 - To avoid rear overturns ....................................................................................................... 2-15

2.12.6 - To avoid rear overturns ....................................................................................................... 2-16

2.12.7 - General operating hazards .................................................................................................. 2-17

2.12.8 - Implements and attachments ............................................................................................. 2-18

2.12.9 - Safety - Towing ................................................................................................................... 2-18

2.12.10 - Road transport ................................................................................................................... 2-19

2.12.11 - Rules of the road ............................................................................................................... 2-19

2.13 - SAFETY - AFTER OPERATION ........................................................................................................ 2-20

CHAPTER 3 - INSTRUMENTS AND CONTROLS ......................................3-1

3.1 - INSTRUMENT PANEL ....................................................................................................................... 3-5

3.2 - WARNING LIGHTS PANEL ............................................................................................................... 3-8

3.3 - WARNING LIGHTS PANEL ............................................................................................................... 3-9

3.4 - FIELD FACTS MONITOR ................................................................................................................ 3-10

3.4.1 - Ground Speed Calibration (with radar option) ..................................................................... 3-11

3.4.2 - Implement Width Setting ................................................................................................... 3-11

3.4.3 - Calibration level 1 ............................................................................................................... 3-11

3.4.4 - Turbo Boost Calibration (tbc) .............................................................................................. 3-11

3.4.5 - Transmission Calibration (trnc) ........................................................................................... 3-12

3.5 - RADAR ............................................................................................................................................. 3-12

3.6 - PEDALS ............................................................................................................................................ 3-13

3.7 - RIGHT HAND CONSOLE ................................................................................................................. 3-14

3.8 - LEFT HAND CONSOLE .................................................................................................................... 3-15

3.9 - SEAT ................................................................................................................................................. 3-16

3.10 - STEERING WHEEL .......................................................................................................................... 3-18

3.11 - UPPER CONSOLE ............................................................................................................................ 3-18

3.11.1 - Air conditioning operation ................................................................................................... 3-18

3.12 - SUN VISOR ...................................................................................................................................... 3-19

3.13 - ROOF HATCH ................................................................................................................................... 3-20

3.14 - HIGH VISIBILITY ROOF ................................................................................................................... 3-20

3.15 - OPENING THE HOOD ...................................................................................................................... 3-21

CHAPTER 4 - OPERATION .........................................................................4-1

Find manuals at https://best-manuals.com

OPERATOR INSTRUCTION BOOK

iii

4.1 - BREAK IN ........................................................................................................................................... 4-5

4.1.1 - The following precautions should be taken during the break in period ................................ 4-5

4.2 - STARTING .......................................................................................................................................... 4-5

4.2.1 - Starting the engine ............................................................................................................... 4-5

4.3 - STOPPING THE ENGINE ................................................................................................................... 4-6

4.4 - DRIVING THE TRACTOR ................................................................................................................... 4-6

4.4.1 - Foot throttle .......................................................................................................................... 4-6

4.4.2 - Choosing the right gear ratio ................................................................................................ 4-6

4.4.3 - Gear sequence ..................................................................................................................... 4-7

4.4.4 - Synchronised range change ................................................................................................. 4-7

4.4.5 - Power shuttle ....................................................................................................................... 4-7

4.5 - "DYNASHIFT" TRANSMISSION ....................................................................................................... 4-7

4.5.1 - General ................................................................................................................................. 4-7

4.5.2 - Operation .............................................................................................................................. 4-7

4.5.3 - Gear sequence ..................................................................................................................... 4-8

4.5.4 - Automation of Dynashift ratio shifting .................................................................................. 4-9

4.6 - POWERSHIFT TRANSMISSION ..................................................................................................... 4-10

4.6.1 - General information ............................................................................................................ 4-10

4.6.2 - Selecting direction .............................................................................................................. 4-10

4.6.3 - Selecting gears ................................................................................................................... 4-10

4.6.4 - Starting gears ..................................................................................................................... 4-10

4.6.5 - Starting ground travel (Using clutch pedal) ......................................................................... 4-11

4.6.6 - Starting ground travel (Without clutch pedal) ..................................................................... 4-12

4.6.7 - Direction change without decluching ................................................................................. 4-12

4.6.8 - Ground speed matching ..................................................................................................... 4-12

4.6.9 - Transmission clutches matches charges in ground speed not engine speed .................... 4-12

4.6.10 - Allowing the tractor to coast .............................................................................................. 4-13

4.6.11 - Towing tractor .................................................................................................................... 4-13

4.6.12 - Engine inoperative .............................................................................................................. 4-13

4.6.13 - Engine operative ................................................................................................................. 4-13

4.6.14 - Creeper gearbox ................................................................................................................. 4-13

4.7 - BRAKES ............................................................................................................................................ 4-14

4.8 - DIFFERENTIAL LOCK ...................................................................................................................... 4-14

4.9 - POWER TAKE OFF (PTO) ................................................................................................................ 4-14

4.9.1 - PTO - 540 and 1000 RPM whith interchangeable shaft ..................................................... 4-15

4.9.2 - P.T.O - 540 and 1000 RPM whith interchangeable end fitting ........................................... 4-16

4.10 - STEERING ........................................................................................................................................ 4-16

4.11 - FRONT AXLE ................................................................................................................................... 4-17

4.11.1 - Suspended front axle .......................................................................................................... 4-17

4.12 - HYDRAULIC LIFT ............................................................................................................................. 4-18

4.12.1 - Attaching an implement from the driving seat ................................................................... 4-19

4.12.2 - Attaching an implement using external controls ................................................................ 4-20

4.12.3 - Transport ............................................................................................................................ 4-21

4.12.4 - Field operation .................................................................................................................... 4-22

4.13 - AUXILIARY HYDRAULICS .............................................................................................................. 4-23

4.13.1 - Closed center load sensing valves .....................................................................................4-23

4.13.2 - Coupling remote cylinder hoses ......................................................................................... 4-23

Find manuals at https://best-manuals.com

OPERATOR INSTRUCTION BOOK

4.13.3 - Remote outlets ................................................................................................................... 4-23

4.13.4 - Bosch SB23 electrohydraulic spool valves ......................................................................... 4-24

4.13.5 - Emergency manual control of the spool valves .................................................................. 4-24

4.13.6 - Memorisation of the joystick (Fig. 34) ................................................................................4-25

4.14 - THREE-POINT LINKAGE ................................................................................................................. 4-26

4.14.1 - Implement installation ....................................................................................................... 4-26

4.14.2 - Lift rods .............................................................................................................................. 4-26

4.15 - DRAWBARS AND HITCHES ............................................................................................................ 4-27

4.15.1 - Swinging drawbar ............................................................................................................... 4-27

4.15.2 - Pintle for semi-mounted trailer ........................................................................................... 4-27

4.16 - ELECTRONIC CONTROL SYSTEM FOR TRANSMISSION CONTROL ......................................... 4-28

4.16.1 - Differential lock control ....................................................................................................... 4-28

4.16.2 - Power front axle (PFA) ........................................................................................................ 4-28

4.16.3 - Power Take-Off Control ...................................................................................................... 4-28

4.16.4 - Independant Power Take-Off ............................................................................................. 4-28

4.16.5 - Dynashift transmission control unit .................................................................................... 4-29

4.16.6 - Hydraulic pressure (Low pressure) .....................................................................................4-29

4.16.7 - Economy P.T.O ................................................................................................................... 4-29

CHAPTER 5 - MAINTENANCE AND ADJUSTMENTS ..............................5-1

5.1 - INITIAL 50 HOUR SERVICE INSPECTION ........................................................................................ 5-7

5.1.1 - Engine, Fuel and Cooling System ......................................................................................... 5-7

5.1.2 - Electrical System and Instruments ....................................................................................... 5-7

5.1.3 - .Front Axle and Steering ....................................................................................................... 5-7

5.1.4 - Transmission and Hydraulics ................................................................................................ 5-7

5.1.5 - Clutches and Brakes ............................................................................................................. 5-7

5.1.6 - General ................................................................................................................................. 5-7

5.2 - DEALER SERVICE OPERATION ........................................................................................................ 5-8

5.3 - USER GUIDE .................................................................................................................................... 5-10

5.3.1 - Engine, fuel and cooling system ......................................................................................... 5-10

5.3.2 - Electrical System and Instruments ..................................................................................... 5-10

5.3.3 - Front Axle and Steering ...................................................................................................... 5-10

5.3.4 - Transmission and Hydraulics ........................................................................................... 5-10

5.3.5 - General ............................................................................................................................... 5-10

5.4 - APPROVED LUBRICANTS .............................................................................................................. 5-11

5.4.1 - Engine oil ............................................................................................................................ 5-11

5.4.2 - Recommended SAE viscosity grades (SAE J300d) ............................................................ 5-11

5.4.3 - Engine coolant .................................................................................................................... 5-11

5.4.4 - Transmission ...................................................................................................................... 5-11

5.4.5 - Front axle (Dana): API GL5/SAE90 ...................................................................................... 5-11

5.4.6 - Front axle (Carraro): API GL5-85 W/140 ............................................................................. 5-11

5.4.7 - Rear axle final reduction (sealed): API GL5-85 W/140 ........................................................ 5-11

5.4.8 - Lubrication fittings .............................................................................................................. 5-11

5.5 - INSTRUCTIONS FOR PRESSURE WASHING ................................................................................ 5-11

5.6 - MAINTENANCE MANUAL .............................................................................................................. 5-12

5.7 - GREASING ....................................................................................................................................... 5-12

Find manuals at https://best-manuals.com

OPERATOR INSTRUCTION BOOK

5.7.1 - Grease the following .......................................................................................................... 5-12

5.8 - ENGINE ............................................................................................................................................ 5-15

5.8.1 - 6 cylinder engine 8210/8220 .............................................................................................. 5-15

5.8.2 - 6 cylinder engine 8270/8280 .............................................................................................. 5-15

5.8.3 - Check the engine oil level every ten hours or daily ............................................................ 5-16

5.8.4 - Change the engine oil every 300 hours .............................................................................. 5-16

5.8.5 - Change the engine oil filter every 300 hours (7, Fig. 7) ...................................................... 5-16

5.8.6 - Closed circuit breather ........................................................................................................ 5-16

5.9 - FUEL SYSTEM ................................................................................................................................. 5-17

5.9.1 - Fuel filter (3, Fig. 16) .......................................................................................................... 5-17

5.9.2 - Bleeding the fuel system .................................................................................................... 5-17

5.9.3 - Fuel sediment bowl (4, Fig. 16) ......................................................................................... 5-17

5.9.4 - Fuel tank ............................................................................................................................. 5-18

5.9.5 - Fuel injection pump, governor and injectors ....................................................................... 5-18

5.10 - AIR CLEANER .................................................................................................................................. 5-19

5.10.1 - Main and secondary element ............................................................................................. 5-19

5.11 - COOLING SYSTEM ......................................................................................................................... 5-20

5.11.1 - Expansion tank 8270/80 ..................................................................................................... 5-20

5.11.2 - Draining the cooling system ............................................................................................... 5-20

5.11.3 - Check the fan belt for condition ......................................................................................... 5-21

5.11.4 - Check the fan belt tension every 300 hours ....................................................................... 5-21

5.11.5 - Belt replacement ................................................................................................................ 5-21

5.12 - STEERING, TRANSMISSION AND HYDRAULIC SYSTEM ........................................................... 5-22

5.12.1 - Change the transmission oil every 1200 hours. ................................................................. 5-22

5.12.2 - Clean or change the 250 microns suction strainer located inside the center housing

(every 1200 hours): .......................................................................................................... 5-22

5.12.3 - Change the 15 micron transmission oil filter ...................................................................... 5-23

5.12.4 - Rear axle final reduction units (sealed compartment) ........................................................ 5-23

5.12.5 - High pressure hydraulic filter .............................................................................................. 5-23

5.12.6 - Change the 150 micron suction strainer (Fig. 27) ............................................................... 5-24

5.12.7 - Transmission oil cooler ....................................................................................................... 5-24

5.13 - AIR CONDITIONING SYSTEM ........................................................................................................ 5-24

5.13.1 - Condenser .......................................................................................................................... 5-24

5.13.2 - Checking operation of air conditioning system ................................................................... 5-24

5.13.3 - Cab air filter ........................................................................................................................ 5-25

5.13.4 - Compressor belt tension adjustment ................................................................................. 5-25

5.14 - FRONT AXLE - 4 WHEEL DRIVE ..................................................................................................... 5-26

5.14.1 - Final reduction units ........................................................................................................... 5-26

5.14.2 - Front axle ............................................................................................................................ 5-26

5.15 - SAFETY CAB OR FRAME ................................................................................................................ 5-27

5.16 - CLUTCH AND BRAKES ................................................................................................................... 5-27

5.16.1 - Adjustments ....................................................................................................................... 5-27

5.17 - DUAL REAR WHEELS ..................................................................................................................... 5-27

5.17.1 - Dual rear wheels ................................................................................................................. 5-27

5.17.2 - Operation ............................................................................................................................ 5-27

5.17.3 - Wheel bolts ........................................................................................................................ 5-27

5.17.4 - Tyre pressure ...................................................................................................................... 5-28

5.17.5 - Tyres pressures .................................................................................................................. 5-28

5.17.6 - Tyre pressure ...................................................................................................................... 5-29

Find manuals at https://best-manuals.com

OPERATOR INSTRUCTION BOOK

5.18 - WHEELS ........................................................................................................................................... 5-30

5.19 - TRACK ADJUSTMENTS ................................................................................................................. 5-30

5.19.1 - FRONT TRACK ................................................................................................................... 5-30

5.19.2 - Pressed steel wheels ......................................................................................................... 5-31

5.20 - REAR TRACK ADJUSTMENT ......................................................................................................... 5-33

5.20.1 - Settings obtained ................................................................................................................ 5-33

5.20.2 - Changing the position of the wheel on the shaft ............................................................... 5-35

5.20.3 - Changing the position of the wheel on the shaft ............................................................... 5-35

5.21 - ELECTRICAL EQUIPMENT .............................................................................................................. 5-36

5.21.1 - Battery ................................................................................................................................ 5-36

5.21.2 - Battery installation .............................................................................................................. 5-37

5.21.3 - Battery removal .................................................................................................................. 5-37

5.21.4 - Alternator ............................................................................................................................ 5-37

5.21.5 - Trailer socket ...................................................................................................................... 5-38

5.21.6 - Headlights adjustment ........................................................................................................ 5-38

5.22 - FUSE REPLACEMENT ..................................................................................................................... 5-39

5.23 - FUSE REPLACEMENT ..................................................................................................................... 5-40

5.24 - FUSE REPLACEMENT ..................................................................................................................... 5-41

5.25 - FUSE REPLACEMENT ..................................................................................................................... 5-42

5.26 - DIESEL FUEL SPECIFICATIONS ..................................................................................................... 5-43

5.27 - FUEL HANDLING AND STORAGE ................................................................................................. 5-43

5.27.1 - CleanIiness ......................................................................................................................... 5-43

5.27.2 - Advice on the use of fuel in cold weather .......................................................................... 5-43

5.28 - STORING THE TRACTOR ................................................................................................................ 5-43

CHAPTER 6 - SPECIFICATIONS .................................................................6-1

6.1 - ENGINE .............................................................................................................................................. 6-5

6.1.1 - Fuel system and air cleaner .................................................................................................. 6-5

6.2 - ROAD SPEEDS ................................................................................................................................... 6-6

6.2.1 - Road Speeds at 2200 rev/min - 650/85R38 tyres - Powershift transmission AG 250 .......... 6-6

6.2.2 - Road speeds "Dynashift" at 2200 rev/min - Heavy duty* with and creeper 1/4 -

20.8R38 tyres ....................................................................................................................... 6-7

6.2.3 - Road speeds at 2200 rev/min "Powersihft" transmission AG150 -

Heavy duty sealed compartment - 20/8R38 tyres ................................................................ 6-8

6.2.4 - Road speeds at 2200 rev/min "Powersihft" transmission AG150 -

Heavy duty sealed compartment - 20/8R38 tyres - With creeper 1/4 .................................. 6-8

6.2.5 - Road speeds at 2200 rev/min - Heavy duty sealed compartment - 650/85R38 tyres .......... 6-9

6.2.6 - Road speeds at 2200 rev/min - Heavy duty sealed compartment - 650/85R38 tires -

With creeper 1/4 ................................................................................................................... 6-9

6.3 - ELECTRICAL SYSTEM ..................................................................................................................... 6-10

6.4 - COOLING ......................................................................................................................................... 6-10

Find manuals at https://best-manuals.com

OPERATOR INSTRUCTION BOOK

vii

6.5 - TRANSMISSION .............................................................................................................................. 6-10

6.6 - FINAL REDUCTION UNITS ............................................................................................................. 6-11

6.7 - POWER TAKE-OFF .......................................................................................................................... 6-11

6.8 - FOUR-WHEEL DRIVE FRONT AXLE ............................................................................................... 6-11

6.9 - HYDRAULICS ................................................................................................................................... 6-11

6.9.1 - Closed center hydraulic system with flow and pressure control ........................................ 6-11

6.10 - HYDRAULIC LIFT ............................................................................................................................. 6-12

6.11 - BRAKES ............................................................................................................................................ 6-12

6.12 - DIFFERENTIAL LOCK - REAR AXLE ............................................................................................... 6-12

6.13 - STEERING ........................................................................................................................................ 6-12

6.14 - WHEELS ........................................................................................................................................... 6-12

6.15 - CAPACITIES ..................................................................................................................................... 6-13

6.16 - TIGHTENING TORQUE ................................................................................................................... 6-14

6.16.1 - Wheel to rear axle .............................................................................................................. 6-14

6.16.2 - Wheel to front axle ............................................................................................................. 6-14

6.17 - MISCELLANEOUS ........................................................................................................................... 6-14

6.18 - NOISE LEVELS ................................................................................................................................ 6-14

6.19 - DIMENSIONS AND WEIGHTS ........................................................................................................ 6-15

CHAPTER 7 - ACCESSORIES AND OPTIONS ...........................................7-1

7.1 - .AVAILABLE ACCESSORIES ............................................................................................................. 7-5

7.2 - TRACTOR PERFORMANCE MONITOR "DATATRONIC 2" ............................................................. 7-6

7.2.1 - Introduction .......................................................................................................................... 7-6

7.2.2 - Description ........................................................................................................................... 7-6

7.2.3 - Symbols ................................................................................................................................ 7-7

7.2.4 - Use ....................................................................................................................................... 7-8

7.2.5 - Use of the memory .............................................................................................................. 7-9

7.2.6 - Use when working ............................................................................................................. 7-10

7.2.7 - Working position ................................................................................................................. 7-11

7.2.8 - Wheel slip control ............................................................................................................... 7-12

7.2.9 - Comparative mode ............................................................................................................. 7-13

7.2.10 - Auxiliary functions .............................................................................................................. 7-14

7.2.11 - Screen contrast .................................................................................................................. 7-14

7.2.12 - Printing of the memory content ......................................................................................... 7-15

7.3 - REAR DUAL CONTROL ................................................................................................................... 7-16

7.3.1 - General ............................................................................................................................... 7-16

7.3.2 - Description of the adjustment screen ................................................................................ 7-16

7.3.3 - Settings .............................................................................................................................. 7-17

7.3.4 - Use ..................................................................................................................................... 7-19

7.3.5 - Working operation .............................................................................................................. 7-20

Find manuals at https://best-manuals.com

OPERATOR INSTRUCTION BOOK

viii

7.4 - GLOSSARY ...................................................................................................................................... 7-20

7.5 - FRONT DUAL CONTROL ................................................................................................................ 7-21

7.5.1 - General .............................................................................................................................. 7-21

7.5.2 - Description of the adjustment screen ............................................................................... 7-21

7.5.3 - Settings .............................................................................................................................. 7-21

7.5.4 - Use (Fig. 25) ....................................................................................................................... 7-22

7.6 - TRAILED IMPLEMENT CONTROL (T.I.C) ....................................................................................... 7-23

7.6.1 - General ............................................................................................................................... 7-23

7.6.2 - Description of the adjustment screen ................................................................................ 7-23

7.6.3 - Settings (Fig. 24) ................................................................................................................. 7-23

7.6.4 - Use (Fig. 27) ....................................................................................................................... 7-24

CHAPTER 8 - TROUBLESHOOTING ..........................................................8-1

8.1 - TC ERROR CODES ............................................................................................................................. 8-5

8.2 - DCC ERROR CODES .......................................................................................................................... 8-6

8.3 - LIMP HOME OPERATION ................................................................................................................. 8-7

CHAPTER 9 - ELECTRIC EQUIPMENT .......................................................9-1

9.1 - LIGHTTING INSTALLATION (EUROPE) ........................................................................................... 9-5

9.2 - LIGHTING INSTALLATION (NA) ....................................................................................................... 9-6

9.3 - ENGINE, CAB EQUIPMENT AND ACCESSORIES (EUROPE AND NA) .......................................... 9-7

Find manuals at https://best-manuals.com

1.TRACTOR IDENTIFICATION

1.1

CHAPTER 1 - TRACTOR IDENTIFICATION

1.TRACTOR IDENTIFICATION

1.3

CONTENT

1.1 - SERIAL NUMBER .............................................................................................................................. 1-5

1.TRACTOR IDENTIFICATION

1.5

1.1 - SERIAL NUMBER

IMPORTANT :

NOTE THE SERIAL NUMBER OF YOUR TRACTOR.

ALWAYS QUOTE THE SERIAL NUMBER IN ANY

COMMUNICATION WITH YOUR AGCO DEALER.

Manufacturer plate with serial number (according to

countries).

V 557

V 644

V 655 Fig. A

Homologation plates (according to countries).

Cab serial number.

V 645

V 656

V295

V 558

Fig. B

1.TRACTOR IDENTIFICATION

1.6

Engine serial number

Serial number

Powershift Gearbox serial number

Front axle Serial number

MODEL ______________________________________

SERIAL NO ___________________________________

ENGINE SER. NO _____________________________

OWNER’S NAME & ADDRESS (IF AVAILABLE)

_____________________________________________

DEALER______________________________________

STREET ______________________________________

CITY _________________________________________

STATE __________ ZIP CODE___________________

DEALERS PHONE NUMBER_____________________

V 648

V 438 Fig. C

Fig. DV 441

Fig. E

V 464

Fig. F

V 437

2. INTRODUCTION - SAFETY PRECAUTIONS AND WARRANTY

2.7

CHAPTER 2 - INTRODUCTION - SAFETY

PRECAUTIONS AND WARRANTY

2.INTRODUCTION - SAFETY PRECAUTIONS AND WARRANTY

2.3