AGCO FENDT 512 Vario Power User manual

OPERATOR'S MANUAL
FENDT
FENDT 512 Vario Power
FENDT 513 Vario Power
FENDT 514 Vario Power
FENDT 516 Vario Power
© AGCO
Original Operator's Manual
414.020.010.015 (4267-en) English
OPERATION
epcatalogs.com

UP-TO-DATE AT THE TIME OF GOING TO PRESS
Constant development in design and equipment ensures the high quality and safety of FENDT trac-
tors and their accessories. We would therefore ask you to appreciate that changes may be required
at any time in terms of form, equipment and technology. The information supplied with respect to
the tractor's scope, appearance, technical data and functions is consistent with the information
available at the date of going to press. It may not be possible to deliver some of the equipment until
later, or it may only be offered in certain markets. No claims may be derived from the information,
illustrations or descriptions contained in this instruction sheet.
epcatalogs.com

VEHICLE DELIVERY TEST REPORT
Maintenance
For a more detailed explanation, please refer to the operator's manual
FOpen the bonnet; demonstrate.
FExplain how to remove, install and clean the main cartridge of the dry air filter.
FExplain how to change the safety cartridge of the dry air filter.
FPoint out the dust discharge valve.
FExplain how to clean the cooling and heating system and give a practical demonstration.
FPoint out the V-belt and explain maintenance procedures.
FPoint out the brake and clutch system reservoir and explain maintenance procedures.
FShow how to check the oil level on the front PTO.
FPoint out the hydraulic oil filter and air vent filter, and explain maintenance procedures.
FPoint out the cab fan filter.
FPoint out the air conditioning condenser.
FPoint out the battery.
FPoint out the fuses.
Start-up
For a more detailed explanation, please refer to the operator's manual
FFor immobiliser (if fitted).
Draw attention to the vehicle-related allocation and point out the vehicle key to be handed over.
Hand over ___ vehicle keys.
FPoint out the filling points and the fuels and lubricants to be checked daily.
Fuel, engine oil, transmission oil
FShow how to drain the compressed air tank.
FDraw attention to different fuels and lubricants for winter operation.
FExplain possible use of biodiesel and biodegradable hydraulic oil.
FShow how to start and stop the engine.
FExplain jump starting, towing and how to turn the tractor off safely.
FExplain how to start off both forwards and backwards, and give a practical demonstra-
tion.
FDemonstrate the function of the foot and hand brake, explain the function of the hand
brake as the auxiliary brake.
FExplain the function of the trailer brake.
In trailers braked by compressed air, the pressure adjustment must only be performed by a
FENDT specialist workshop.
FExplain and demonstrate how to adjust the steering wheel.
Vehicle type ............
Vehicle chassis no. .. .. ..... Service workshop
epcatalogs.com

FExplain and demonstrate the EPC safety switch.
FExplain and demonstrate the operator's seat settings.
Driving functions and joystick
For a more detailed explanation, please refer to the operator's manual
FExplain and demonstrate the neutral position.
FExplain and demonstrate the acceleration rate.
FExplain and demonstrate the travel range selector.
FExplain and demonstrate how to change the direction of travel (quick reversing and pro-
gramming).
FExplain and demonstrate the cruise control function.
FExplain and demonstrate load limit control.
FExplain and demonstrate how to store the engine speed.
Operating functions
For a more detailed explanation, please refer to the operator's manual
FExplain and demonstrate how to switch the rear and front PTO on and off.
FExplain and demonstrate four-wheel drive.
FExplain and demonstrate the differential lock.
FExplain and demonstrate front axle suspension.
FExplain and demonstrate hydraulic valve actuation and settings.
FExplain and demonstrate the EPC operating controls.
FExplain and demonstrate the EPC control panel functions.
FExplain and demonstrate implement control (if fitted).
FExplain and demonstrate how to save and retrieve settings.
FExplain and demonstrate the automatic functions of the power lift and PTO.
FExplain how to work with the EPC.
FExplain the EPC slip control system (if fitted).
FExplain the EPC external control (if fitted).
FExplain and demonstrate the EPC/DA function of the EPC (if fitted).
FExplain and demonstrate how to operate the front power lift (if fitted).
FExplain and demonstrate the trailer hitch.
FExplain and demonstrate the reverse drive control (if fitted).
FExplain the safety instructions.
We hereby confirm that the vehicle has been handed over in accordance with the above
points.
(Keep the vehicle delivery test report with the vehicle documents)
Delivered on . . . . . . . . . . . . . . . .
Signature of mechanic . . . . . . . . . . . . . . . . .
Customer's signature. . . . . . . . . . . . . . . . .
epcatalogs.com

OPERATOR'S MANUAL
© PSD / HF 11.14
4267
FENDT 512 Vario
From chassis no. 413/23/0101
FENDT 513 Vario
From chassis no. 414/23/0101
FENDT 514 Vario
From chassis no. 415/23/0101
FENDT 516 Vario
From chassis no. 416/23/0101
AGCO GmbH
Maschinen und Schlepperfabrik 87616 Marktoberdorf / Bavaria / Germany
Tel. no.: [phone] Fax: + 49 (0) 8342 77-222
epcatalogs.com

Buy now
Fendt Tractor 512, 513, 514, 516 Vario Power Operator's Manual PDF
With Instant Download