AGCO Massey Ferguson 1700M Series User manual
Workshop Service Manual
1700M Series Compact Tractors
1735M
1740M
1750M
1755M
1760M
North America
4205 River Green Parkway, Duluth GA 30096 USA
© AGCO 2018
May 2018
4283619M1
NA
English
CALIFORNIA
Proposition 65 Warning
WARNING: Diesel engine exhaust and some of its constituents are known to the State of
California to cause cancer, birth defects, or other reproductive harm.
WARNING: Battery posts, terminals and related accessories contain lead and lead compounds,
chemicals known to the State of California to cause cancer, birth defects, or other reproductive
harm. Wash hands after handling.
Find manuals at https://best-manuals.com
1. General
1.1 General information .................................................... 1-3
1.1.1 Introduction to this service manual ........................................ 1-3
1.1.2 Units of measurement ................................................. 1-3
1.1.3 Conversion table ..................................................... 1-4
1.1.4 Table of contents ..................................................... 1-5
1.1.5 Page numbers ....................................................... 1-5
1.1.6 Intended use ........................................................ 1-5
1.1.7 Proper disposal of waste ............................................... 1-5
1.2 Safety ................................................................. 1-6
1.2.1 Safety alert symbol ................................................... 1-6
1.2.2 Safety messages ..................................................... 1-6
1.2.3 Informational messages ................................................ 1-6
1.2.4 Safety signs .........................................................1-6
1.2.5 A word to the technician ............................................... 1-7
1.2.6 The service manual ................................................... 1-8
1.2.7 Operation .......................................................... 1-8
1.2.7.1 Prepare for operation ........................................... 1-8
1.2.7.2 Roll over protective structure ...................................... 1-8
1.2.7.3 General information ............................................ 1-9
1.2.7.4 Personal protective equipment ....................................1-12
1.2.7.5 Seat instruction ...............................................1-12
1.2.7.6 Shield and guards ............................................. 1-13
1.2.7.7 Power take-o safety ...........................................1-13
1.2.7.8 Exhaust warning .............................................. 1-14
1.2.7.9 Agricultural chemicals .......................................... 1-14
1.2.7.10 Travel on public roads .......................................... 1-15
1.2.8 Maintenance ....................................................... 1-16
1.2.8.1 General maintenance information ..................................1-16
1.2.8.2 Fire prevention and first aid ...................................... 1-17
1.2.8.3 High pressure leaks ........................................... 1-18
1.2.8.4 Engine safety ................................................ 1-19
1.2.8.5 Fuel safety .................................................. 1-20
1.2.8.6 Battery safety ................................................ 1-21
1.2.8.7 Tire safety .................................................. 1-22
1.2.8.8 Replacement parts ............................................ 1-22
1.2.8.9 Weld on the machine precautions ................................. 1-22
1.3 Machine Identification ................................................. 1-24
1.3.1 Serial number plate .................................................. 1-24
1.3.2 Engine identification .................................................. 1-24
1.3.3 Chassis number ..................................................... 1-25
1.4 Specifications ......................................................... 1-26
1.4.1 Platform tractor dimensions ............................................ 1-26
1.4.2 Cab tractor dimensions ................................................1-27
1.4.3 Engine specifications ................................................. 1-29
1.4.4 Electrical specifications ............................................... 1-30
1.4.5 Power shuttle transmission specifications .................................. 1-30
1.4.6 Hydrostatic transmission specifications .................................... 1-30
1.4.7 Power take-o specifications ........................................... 1-31
1.4.8 Front axle specifications ............................................... 1-31
1.4.9 Rear axle specifications ............................................... 1-32
Table of contents
1700M Series Compact Tractors 1-1
4283619M1
Find manuals at https://best-manuals.com
1.4.10 Brake specifications .................................................. 1-32
1.4.11 Hydraulic specifications ............................................... 1-32
1.4.12 Fuel specifications ................................................... 1-36
1.4.13 Slope angle for stationary operation ...................................... 1-37
1.4.14 Capacities ......................................................... 1-37
1.4.15 Lubrication specifications .............................................. 1-37
1.4.16 Air conditioner specifications ........................................... 1-38
1.4.17 Wheel bolt torque chart ............................................... 1-39
1.4.18 Tire inflation pressures ................................................ 1-39
1.4.19 Maximum load capacity ............................................... 1-40
1.5 Lubrication and maintenance ...........................................1-42
1.5.1 Lubrication and maintenance chart for daily inspection ......................... 1-42
1.5.2 Lubrication and maintenance chart ....................................... 1-42
1.5.3 Lubrication fill and drain locations ........................................ 1-44
1.5.4 Lubrication fittings ................................................... 1-45
1.6 Machine main components ............................................ 1-46
1.6.1 Cab tractor major components .......................................... 1-46
1.6.2 Platform tractor major components ....................................... 1-47
1.6.3 Separation guide chart ................................................ 1-48
1.7 General precautions for the repair ...................................... 1-49
1.7.1 Parts removal, disassembly, and assembly precautions ........................ 1-49
1.7.2 Parts installation precautions ........................................... 1-49
Table of contents
1-2 1700M Series Compact Tractors
4283619M1
Find manuals at https://best-manuals.com
1.1 General information
1.1.1 Introduction to this service manual
This service manual gives information from engineering tests, operating data, and the latest service
techniques at the time of publication. Read this service manual carefully before doing any service on the
machine.
The photos and illustrations used in this service manual were current at the time of publication. Production
changes can cause machines to vary from the photos and the illustrations. The manufacturer reserves the
right to redesign and change machines as necessary without notification.
WARNING:
Some pictures in this manual show the machine with shields or guards removed to permit
for a better view of the subject of the picture. All shields and guards must be in position
before operating the machine.
Machine movement when in normal use determines right-hand and left-hand.
1.1.2 Units of measurement
Measurements are given in metric units followed by the equivalent in US units. Hardware sizes are given in
millimeters for metric hardware and inches for US hardware.
[V]
GUID-D0FA2E94-0D28-42E9-A80B-6BB593BA9687 [V1]
GUID-EBB3FCAE-8712-43A9-BB65-1DB48189C57C [V2]
1. General
1700M Series Compact Tractors 1-3
4283619M1
Find manuals at https://best-manuals.com
1.1.4 Table of contents
This manual has a table of contents at the front. The table of contents shows the divisions. The individual
divisions also have a table of contents.
1.1.5 Page numbers
All pages have two numbers, such as 01-25. The first number shows the division. The second number
shows the page in the division.
Page numbers occur on the lower right-hand or lower left-hand corner of each page.
1.1.6 Intended use
This machine is designed solely for use in customary agricultural operations.
Do not use this machine for any application or purpose other than those described in this manual. The
manufacturer accepts no liability for damage or injury resulting from misuse of this machine.
Compliance with the conditions of operation, service and repair as specified by the manufacturer constitute
essential elements for the intended use of this machine.
This machine should be operated, serviced and repaired only by qualified persons familiar with its
characteristics and familiar with the relevant safety rules and procedures.
All generally recognized safety regulations and road trac regulations must be obeyed at all times.
Any unauthorized modifications performed on this machine will relieve the manufacturer of all liability for
any resulting damage or injury.
1.1.7 Proper disposal of waste
Improper disposal of waste can pollute the environment and ecology. A few examples of potentially
harmful equipment waste can include, but not limited to, items such as oil, fuel, coolant, brake fluid, filters,
battery chemicals, tires, etc.
Use leak proof containers when draining fluids. Do not use food or beverage containers to collect waste
fluids, as food or beverage container(s) may mislead someone into drinking from them.
Do not pour or spill waste onto the ground, down a drain, or into any water source.
Air conditioning refrigerants escaping into the air can damage the Earth's atmosphere. Government
regulations may require a certified air conditioning service center to recover and recycle used air
conditioning refrigerants.
Inquire with local environmental or recycling center on the proper way to recycle or dispose waste.
GUID-9BD2A110-651C-40FC-8D40-EDBAFD670A3C [V1]
GUID-6300C4A8-D25F-4B2F-BDC2-FAC58F99378B [V1]
GUID-939752D3-F912-4AFA-9CE0-FF5251AFAD3D [V3]
GUID-D27C9EFF-D3E3-4F5E-93ED-A6E5560C23DF [V3]
1. General
1700M Series Compact Tractors 1-5
4283619M1
Find manuals at https://best-manuals.com
1.2 Safety
1.2.1 Safety alert symbol
The safety alert symbol means Attention! Become
Alert! Your Safety Is Involved!
Look for the safety alert symbol both in this
manual and on safety signs on this machine. The
safety alert symbol will direct your attention to
information that involves your safety and the safety
of others.
GUID-4C201302-DBD2-4BFB-8D98-1DDED263BD6E-high.jpg [High]
Fig. 2
1.2.2 Safety messages
The words DANGER, WARNING or CAUTION are
used with the safety alert symbol. Learn to
recognize these safety alerts and follow the
recommended precautions and safety practices.
DANGER:
Indicates an imminently hazardous
situation that, if not avoided, will
result in DEATH OR VERY SERIOUS
INJURY.
WARNING:
Indicates a potentially hazardous
situation that, if not avoided, could
result in DEATH OR SERIOUS INJURY.
CAUTION:
Indicates a potentially hazardous
situation that, if not avoided, may
result in MINOR INJURY.
GUID-73F05026-C37B-415A-8140-AD939A283378-high.jpg [High]
Fig. 3
1.2.3 Informational messages
The words important and note are not related to personal safety, but are used to give additional information
and tips for operating or servicing this equipment.
IMPORTANT: Identifies special instructions or procedures which, if not strictly observed, could result in
damage to or destruction of the machine, process, or its surroundings
NOTE: Identifies points of particular interest for more ecient and convenient repair or operation.
1.2.4 Safety signs
WARNING:
Do not remove the safety signs. Replace safety signs that you cannot read, are damaged,
or are missing.
Clean the machine surface with a weak soap and water solution before you replace the safety signs.
Replacement safety signs are available from your dealer.
[V]
GUID-5D9F270E-D748-4741-82B1-BE49B78685F2 [V3]
GUID-E54F7740-C021-42A8-8784-4287BE4356C8 [V3]
GUID-9A909F52-D57E-4C30-8CC7-6FDB6D7E9982 [V2]
GUID-2FB17168-6A01-47C5-B298-234AF171520B [V6]
1. General
1-6 1700M Series Compact Tractors
4283619M1
Find manuals at https://best-manuals.com
Always make sure that safety signs are in the correct locations and that you can read the safety signs.
Illustrations of safety sign locations are at in this section.
Keep the safety signs clean. If necessary, use a weak soap and water solution.
1.2.5 A word to the technician
Read and understand the safety section in this
service manual before operating or servicing the
machine. Read and understand the safety sections
in the manuals for all attachments before operating
or servicing attachments. The technician has the
key to safety. Good safety practices protect
everyone.
Study the safety information in this service
manual. Make the safety information a working
part of the safety program. The safety information
in this service manual applies specifically to this
type of machine. Always do all other usual and
customary safe working precautions. Remember -
The technician has the responsibility for safety.
Good safety practices can prevent serious injury or
death.
The safety section points out some basic safety
situations that can occur during the operation and
maintenance of the machine. The safety section
also suggests possible ways to deal with these
situations. The safety section does not replace
safety practices in other parts of this service
manual.
Practice good safety to help prevent injury or
death.
Learn how to operate the machine and how to use
the controls correctly.
Do not let other persons operate the machine
without instruction and training.
Follow all safety precautions and instructions in the
manuals and on safety signs axed to the
machine and all attachments.
Use only approved attachments and equipment.
Make sure the machine has the correct equipment
needed by the local regulations.
WARNING:
An operator should not use alcohol or
drugs which can aect their alertness
or coordination. An operator on
prescription or 'over the counter'
drugs needs medical advice on
whether or not they can properly
operate machines. If any attachments
used on this equipment have a
separate Operator Manual, see that
manual for other important safety
information.
GUID-AC91CCF6-1FF8-4A85-97A1-2D1562806825-high.jpg [High]
Fig. 4
GUID-3C35D58D-1F5D-4B85-A915-C7BB48F47262 [V1]
1. General
1700M Series Compact Tractors 1-7
4283619M1
Find manuals at https://best-manuals.com
1.2.6 The service manual
Read the table of contents and basic layout. Become familiar with all parts of this service manual. This
service manual gives the technician very important information.
Machine movement when in normal use determines right-hand and left-hand.
This manual covers general safety practices for this machine.
The photos, illustrations, and data used in this manual were current at the time of printing. Inline
production changes can make machines vary from the information in the service manual. The manufacturer
reserves the right to redesign and change the machine as necessary without notification.
WARNING:
In some of the illustrations and photos used in this manual, shields or guards may have
been removed for clarity. Never operate the machine with any shields or guards removed.
If the removal of shields or guards is necessary to make a repair, they must be replaced
before operation.
1.2.7 Operation
1.2.7.1 Prepare for operation
Read and understand all operation instructions and precautions in this manual before you operate the
machine or do the servicing.
Make sure that you know and understand the positions and operations of all controls. Make sure that all
controls are in neutral and that the parking brake is applied before you start the machine.
Make sure that all persons are away from your area of work before you start and operate the machine.
Examine and learn the controls in an area that is clear of persons and obstacles before you start work.
Know the machine dimensions and make sure that you have sucient space available to operate the
machine. Do not operate the machine at high speeds in crowded areas.
It is important to know and use the correct procedures when you do work around and operate the
machine. Do not let children or unqualified persons operate the machine. Keep others, especially children,
away from your area of work. Do not let others to ride on the machine.
Make sure that the machine is in good condition for operation. Refer to the operator manual. Make sure
that the machine has the correct equipment required by local regulations.
1.2.7.2 Roll over protective structure
The roll over protective structure (ROPS) is eective in reducing injuries during overturns. Overturning a
tractor without ROPS or with the ROPS folded down can result in serious injury or death. Operate with
ROPS folded down only when conditions make this necessary. Return ROPS to upright, locked position as
soon as conditions permit.
Do not weld, drill, or alter the ROPS.
If the tractor has been rolled over or the ROPS frame has been damaged in any manner, the ROPS must be
replaced. Do not attempt to repair a damaged ROPS. If damage does occur, consult your dealer and
replace all damaged parts.
Before using the tractor make sure the ROPS frame is not damaged and it is securely fastened to the
tractor .
Do not attach chains, ropes, or cables to the ROPS for pulling purposes - damage to the ROPS and/or
overturn of the tractor may result. Always pull from the tractor drawbar.
Observe all recommendations and instructions regarding the installation of covers or roofs which are used
as sunshields only, and do not aord the operator protection from falling objects.
GUID-0CC50E5C-AD62-4FFD-9435-62214FEFA5F4 [V1]
[V]
GUID-A25B667B-D7CF-4C75-8AED-C10113104322 [V5]
GUID-171439FB-BBE1-4C99-AF7B-55DDA26F7427 [V2]
1. General
1-8 1700M Series Compact Tractors
4283619M1
1.2.7.3 General information
When parking, park the machine on a solid level
surface and lower any implements to the ground.
Put all controls in neutral and apply the park brake.
Stop the engine and take the key with you.
WARNING:
Do not leave the machine unattended
with any implement or attachment in
the raised position. Lower the
implement or attachment fully before
leaving the machine. A sudden loss of
hydraulic pressure can cause the
implement or attachment to drop
without warning.
Make sure the machine is in the proper operating
condition according to the Operator Manual.
Do not dismount from moving machinery.
Stay o slopes too steep for operation.
Be aware of the size of the machine and have
enough space available to allow for operation.
GUID-E77631FB-0DC0-4637-9090-88018315176E-high.jpg [High]
Fig. 5
Do not operate near the edge of banks. Setback
distance from the bank must equal or exceed, the
overall height of the bank.
Whenever possible, travel directly up or down
slopes, keeping the heavy end of the tractor on
the uphill side. If necessary to cross a steep slope,
avoid turning uphill. Slow down and make a wide
turn.
Do not operate on steep slopes as overturn may
result.
GUID-5773C572-FF9E-4B0D-92E2-272FEDB283F0-high.jpg [High]
Fig. 6
On models with independent brake pedals, keep
the brake pedals latched together at all times
unless independent braking is required. Never use
independent braking during transport.
Always drive at a proper speed relative to local
conditions and ensure your speed is low enough
for an emergency stop.
Reduce speed prior to turns to avoid the risk of
overturning.
Keep speed to a minimum.
GUID-70723810-F07D-41BB-8A27-3DC46F69959B-high.jpg [High]
Fig. 7
GUID-772B8346-0CC8-436F-B0A0-3C9F619C98E4 [V2]
1. General
1700M Series Compact Tractors 1-9
4283619M1
Always keep the tractor in gear to provide engine
braking when going downhill. Do not coast.
Avoid sudden or heavy brake applications when
operating in wet, muddy, or icy ground conditions,
or on loose surfaces, such as sand or gravel.
Sudden or heavy braking during turns increases
the tendency to over steer. This eect is more
pronounced with trailed equipment.
Keep a firm grip on the steering wheel at all times,
with the thumbs clear of the spokes when driving
the tractor.
Remain seated in operator’s seat. GUID-C390C314-A698-45F7-B9C3-591E44CEDE37-high.jpg [High]
Fig. 8
In the event of an overturn, hold the steering
wheel firmly and keep your seat belt fastened. Do
not attempt to leave the seat until the tractor has
come to rest.
Watch for holes, rocks, or other hidden hazards.
Always inspect area prior to operation.
Be observant of the operating area and terrain.
GUID-3019A033-3E50-415E-9872-EC3DCD1E0072-high.jpg [High]
Fig. 9
Avoid contact with electrical power lines. Contact
with electrical power lines can cause electrical
shock, resulting in very serious injury or death.
GUID-DB0A93E4-AEB5-49D5-AC5F-DD1454F1CFC6-high.jpg [High]
Fig. 10
Never allow anyone on any part of the tractor or
attachments except in the operator's seat when
the engine is running.
Do not get on or o the tractor or attachments
while the tractor is moving.
Do not carry passengers.
GUID-C2306AC9-7D33-4387-8BC6-BD1F5749BDED-high.jpg [High]
Fig. 11
1. General
1-10 1700M Series Compact Tractors
4283619M1
Always shut o the engine, shift the transmission
to neutral, set park brake and remove the start key
before leaving the operator's seat or before
permitting anyone to inspect, clean, lubricate,
adjust or repair any part of the tractor or
attachments. Never leave the tractor unattended
while the engine is operating.
GUID-DB4C2E27-9DAC-4734-83E4-BC4BB5C26EAF-high.jpg [High]
Fig. 12
Pull only from the approved drawbar.
Towing or attaching to other locations may cause
the tractor to overturn.
Use a safety transport chain with towed
implements. A safety transport chain connecting
the tractor to the implement will help control pull-
type equipment should it accidentally separate
from the drawbar.
Always attach the safety transport chain to the
tractor drawbar support.
Provide only enough slack in the safety transport
chain to permit turning. See your dealer for a chain
with strength rating equal to or greater than the
gross weight of the towed machine.
For towed equipment without brakes, Do not tow
equipment at speeds over 32 km/h (20 mph). Do
not tow equipment that, when fully loaded, weighs
more 1.5 times the weight of the towing unit.
For towed equipment with brakes, Do not tow
equipment at speeds over 40 km/h (25 mph). Do
not tow equipment that, when fully loaded, weighs
more than 4.5 times the weight of the towing unit.
Stopping distance increases with speed and
weight of towed loads, and on hills and slopes.
Towed loads with or without brakes, that are too
heavy for the tractor or are towed too fast, can
cause loss of control. Consider the total weight of
the equipment and load.
GUID-C5FC70AD-D6B4-4A54-A1DF-064B6554A1F0-high.jpg [High]
Fig. 13
1. General
1700M Series Compact Tractors 1-11
4283619M1
When using a loader attachment, to avoid serious
injury or death due to falling loads resulting from
inadvertent raising or roll-back of the loader, do not
connect loader hydraulics to any tractor auxiliary
valve that has detents which cannot be locked out
or removed, except for the float function in the
loader lower circuit. If the tractor is equipped with
such a valve, a dedicated, properly configured
loader valve must be installed.
Make sure the proper attachment is on the loader
so the load is restrained and cannot roll down the
loader arms onto the operator.
GUID-E3A5C746-C20B-4ACD-8E81-D2DB48D8D78F-high.jpg [High]
Fig. 14
1.2.7.4 Personal protective equipment
Put on all personal protective equipment (PPE) and
protective clothes that are supplied to you or that
are necessary for the conditions and by applicable
laws. PPE includes equipment to prevent injury to
your eyes, lungs, ears, head, hands and feet.
Always keep hands, feet, hair, and your clothes
away from parts that move. Do not put on loose
clothing, jewelry, watches, or other items that can
tangle in parts that move. Tie up long hair that can
also tangle in moving parts.
GUID-1AEEBD1D-C71B-432C-9D23-52467D7C0BBF-high.jpg [High]
Fig. 15
1.2.7.5 Seat instruction
Securely fasten the seat belt before operating the
machine. Always remain seated and have the seat
belt fastened while operating the machine when
the roll over protective structure (ROPS) is in the
upright position. Replace the seat belts when they
become worn or broken.
Never wear a seat belt loosely or with slack in the
belt system. Never wear the seat belt in a twisted
condition or pinched between the seat structural
members.
Do not wear the seat belt when the ROPS is
folded down.
Do not adjust the steering column or seat while
driving.
GUID-5BA328EA-7732-4CE8-97B2-6511151E943C-high.jpg [High]
Fig. 16
GUID-7FEFA67B-E06F-4EFE-A23E-738FE96997E9 [V3]
GUID-75EB1F95-781C-4B75-AA27-63C5C20FE1AC [V2]
1. General
1-12 1700M Series Compact Tractors
4283619M1
1.2.7.6 Shield and guards
WARNING: Entanglement hazard.
Belts and components that rotate.
Severe personal injury or death can
occur.
Do not open, remove, or put your
hand behind shields if the engine is
running. Stop the machine before
doing service to the machine.
All shields and guards must be in the correct
position and in good condition. Keep away from
the components that rotate.
GUID-6163F2D6-39D6-48BF-871C-AC346EE022D2-high.jpg [High]
Fig. 17
DANGER: Entanglement hazard.
Rotating components.
Severe personal injury or death can
occur.
Do not make adjustments or repairs
to components while they are
moving. Stop the machine before
doing service to the machine.
Do not operate the machine with the drive shaft
shields open or removed.
Keep away from the components that turn.
Make sure guards that turn are free.
GUID-CEB32148-1F4C-457C-ADF7-595DFC51AC25-high.jpg [High]
Fig. 18
1.2.7.7 Power take-o safety
Keep all shields in place.
The rear power take-o (PTO) master shield (1)
must be correctly installed at all times. The PTO
shaft cover(s) must be installed when the PTO
driveline is not in use.
Do not use PTO adapters. PTO shaft adapters,
reducers and/or extensions extend the implement
drive shaft coupler and universal joint beyond the
protection of the PTO master shield.
Reduce PTO speed slowly. When stopping any
PTO driven machine, idle the engine to reduce the
PTO speeds before disengaging. GUID-BF7DE9A5-FD7D-4F4B-8959-B4E19A04061B-high.jpg [High]
Fig. 19
GUID-9398BDE6-F83A-4855-B266-E86D0B48B9D7 [V9]
GUID-CEF3A160-394D-4520-8BAB-D3FB6D1D0D38 [V2]
1. General
1700M Series Compact Tractors 1-13
4283619M1
The implement drive shaft coupler (1) must
securely lock to, and be retained by the annular
groove on the tractor PTO shaft.
Always disengage the PTO, park the tractor, shut
o the engine and remove the key before:
• Connecting or disconnecting the implement
drive shaft.
• Adjusting the PTO driveline or PTO driven
machine.
• Cleaning, unplugging, or servicing the PTO
driven machine.
GUID-A25474AA-9D4A-4FA5-95C3-D1507C3CE13A-high.jpg [High]
Fig. 20
1.2.7.8 Exhaust warning
WARNING: Inhalation hazard. Exhaust
gases.
Death or serious illness can occur.
Do not operate the engine in a closed
building unless the exhaust is
ventilated to the outside.
Do not tamper with or modify the exhaust system
with unapproved extensions.
GUID-55072A39-D882-4355-8ABA-05660F3F6EDA-high.jpg [High]
Fig. 21
1.2.7.9 Agricultural chemicals
Agricultural chemicals are very dangerous. Incorrect procedures with fertilizer, fungicides, herbicides,
insecticides and pesticides can cause injuries to plants, animals, soil and other persons property.
Always read and follow all manufacturers instructions before you open chemical containers.
Read and follow instructions each time you use a chemical.
Use the same precautions when you do adjustments, do servicing, clean or store the machine as used
when you put chemicals into the hoppers or tanks.
Tell all persons who are near chemicals of the possible dangerous results and the safety precautions that
are necessary.
Stay upwind and away from smoke from a chemical fire.
Keep or discard all chemicals that are not used as specified by the chemical manufacturer.
GUID-AC6BA923-B398-43F4-BFAE-5130AFED6FC5 [V4]
GUID-A494D2FA-1956-40C4-9743-052166A2A431 [V4]
1. General
1-14 1700M Series Compact Tractors
4283619M1
1.2.7.10 Travel on public roads
Make sure that you understand the speed, brakes,
steering, and load properties of this machine
before you operate the machine on public roads.
Use good judgment when you operate the
machine on public roads. Keep complete control of
the machine at all times. Do not coast on the
downhills.
The maximum speed of agricultural equipment is
controlled by local regulations. Adjust travel speed
to keep control of the machine at all times.
Learn and obey all road rules and laws that apply
to your machine. Get information from your local
law enforcement agency for local regulations
about the movement of agricultural equipment on
public roads. Use head lamps, flashing warning
lamps, rear lamps and turn signals, day and night,
unless local laws do not let you.
Make sure that all flashers operate before you
operate the machine on a public road. Make sure
that the reflectors are installed correctly, in good
condition, and clean. Make sure that the Slow
Moving Vehicle (SMV) emblem is clean, can be
seen, and is installed correctly on the rear surface
the machine.
If the machine has a loader, operate the machine
with the loader as low as possible. Do not operate
the machine with loader up.
If the machine has two brake pedals, lock the
brake pedals together to make the two wheel
brakes apply at the same time.
Lift implements to the transport position and lock
the implement in position. Put all implements into
the most narrow position.
Disengage the power take-o and the dierential
lock.
With towed implements, use a correct hitch pin
with a clip retainer and safety transport chain.
Look at other trac on the road. Keep to your side
of the road and pull to the side of the road, when
possible, to let faster trac through.
Know the total width, length, height, and weight of
the machine. Be careful when you operate the
machine on narrow roads and across narrow
bridges.
GUID-657D3002-48DB-436B-9B56-D3750095397D-high.jpg [High]
Fig. 22
GUID-9F5833EA-33BD-4C88-AA79-9433C36B3EF6 [V3]
1. General
1700M Series Compact Tractors 1-15
4283619M1
Do not let the machine touch electrical power
lines. If the machine touches electrical power
lines, electrical shock injury and death can occur.
GUID-DB0A93E4-AEB5-49D5-AC5F-DD1454F1CFC6-high.jpg [High]
Fig. 23
1.2.8 Maintenance
1.2.8.1 General maintenance information
Before you do maintenance, lubricate, do
servicing, clean, or make adjustments:
• Park the machine on a solid, level surface.
• Make sure that all the controls are in the
neutral position and apply the parking brake.
• Make sure that the machine and the
attachments are lowered to the ground.
• Stop the engine and take the key with you.
• Look and Listen! Make sure that all parts that
move are stopped.
• Put chocks in front of and behind the wheels of
the machine before you do work on or below
the machine. GUID-DB4C2E27-9DAC-4734-83E4-BC4BB5C26EAF-high.jpg [High]
Fig. 24
After you do work on the machine, remove all tools from the machine.
Make sure that electrical connectors are clean before you connect them.
Do a check for loose, broken, missing, or damaged parts. Make sure that the machine is in good repair.
Make sure that all guards and shields are in position.
Do not do the servicing, examine or adjust chains
or belts while the engine is in operation.
GUID-7D1C9640-D737-4F38-8886-F1D2280DF613-high.jpg [High]
Fig. 25
[V]
GUID-93C8628D-B392-4191-80DB-7D54BDAAF61B [V16]
1. General
1-16 1700M Series Compact Tractors
4283619M1
Do not operate the machine with the drive shaft
shields open or removed. Entanglement in drive
shafts that rotate can cause injury or death.
Stay clear of components that rotate.
Make sure that guards that rotate can rotate freely.
A loose yoke can come o a shaft and result in
injury to persons or damage to the machine.
When you install a quick disconnect yoke, the
spring activated locking pins must move freely and
be in the groove on the shaft. Pull on the driveline
to make sure that the quick disconnect yoke can
not be pulled o the shaft. GUID-CEB32148-1F4C-457C-ADF7-595DFC51AC25-high.jpg [High]
Fig. 26
Remove spilled oil, antifreeze or fuel immediately
from the steps, platform, and other access areas.
Keep all access areas clean of unwanted materials.
GUID-3B306DB1-0777-4FA6-86F1-895652B4C1DB-high.jpg [High]
Fig. 27
1.2.8.2 Fire prevention and first aid
Be prepared for emergencies.
Keep a first aid kit available for use on small cuts
and scratches.
Keep one or more fire extinguishers of the correct
type. Examine fire extinguishers regularly as stated
by the manufacturer. Make sure that the fire
extinguishers are charged and in operating
condition.
Crop material is flammable, there is a risk of fire.
Use a water type fire extinguisher or other water
source for a fire in crop.
For fires in material other than crop, such as oil or
electrical components, use a dry chemical fire
extinguisher with an ABC rating.
Keep fire extinguishers easy to access where fires
can occur.
Frequently remove crop material from the machine
and examine for components that are too hot. Do
checks on the machine each day for noises that
are not usual. Unusual noises can indicate a worn
out component that can cause too much heat.
If flame cutting, welding, arc welding, or grinding
is to be done on the machine or attachments, clear
GUID-FF34ACC9-D080-4CD5-9528-F426605803FF-high.jpg [High]
Fig. 28
GUID-9D716526-CF1A-4CD9-89A6-FD350D1B1E7A [V7]
1. General
1700M Series Compact Tractors 1-17
4283619M1
This manual suits for next models
5
Table of contents
Other AGCO Tractor manuals
AGCO
AGCO FENDT 1000 Vario User manual
AGCO
AGCO ROGATOR 418 User manual
AGCO
AGCO FENDTONE User manual
AGCO
AGCO Massey Ferguson 4400 Series User manual
AGCO
AGCO FENDT 700 Vario S4 Series User manual
AGCO
AGCO FENDT 900 User manual
AGCO
AGCO Massey Ferguson 533 User manual
AGCO
AGCO 8200 Series User manual
AGCO
AGCO Challenger MT945B User manual
AGCO
AGCO 4700 Series User manual
AGCO
AGCO VALTRA BF65 User manual
AGCO
AGCO Massey Ferguson 2604H User manual
AGCO
AGCO FENDT 938 Vario MT User manual
AGCO
AGCO FENDT 1000 Vario User manual
AGCO
AGCO 8110 Manual
AGCO
AGCO FENDT 800 Vario SCR Series User manual
AGCO
AGCO FENDT 512 Vario Power User manual
AGCO
AGCO Challenger MT255B User manual
AGCO
AGCO Challenger MT845E User manual
AGCO
AGCO Challenger MT855E User manual
