aidapt VP174SS User manual

EN
Tri-Wheeled Walkers
VP174SS –Blue Steel Tri Walker with Bag
VP174RS –Red Steel Tri Walker with Bag
VP174SS/N –Blue Steel Tri Walker No Bag
VP174RS/N –Red Steel Tri Walker No Bag
Basket available to buy separately –VP103
VP172AA –Red Aluminium Tri Walker with Bag, Basket and Tray
VP172AB –Blue Aluminium Tri Walker with Bag, Basket and Tray
VP172AC -Silver Aluminium Tri Walker with Bag, Basket and Tray
User Guide with Fixing and Maintenance
Instructions

Fixing and Maintenance Instructions Ver.1 12/2012 (2758)
2
This file is available to view and download as a PDF at
www.aidapt.com. Sight impaired customers can use a
free PDF Reader (such as adobe.com/reader) to zoom
in and increase the text size for improved readability.
INTRODUCTION
Thank you for choosing your Aidapt Tri-walker.
Your tri-walker has been designed to assist the user to walk and carry small items of
shopping with our optional special shopping bag designed specifically to fit your tri-
walker. Only use bags supplied and designed for your Tri-walker.
Do not use or combine bags or baskets from other manufacturers.
In normal use, i.e. when both hands are placed on the handles of the Tri-Walker,
please ensure it is fully opened and locked into position. Always keep both hands on
the Tri-Walker, do not put full pressure on one side as this may cause tipping.
When not in use, you can simply fold the tri-walker and store away until you require it
next. The tri-walker is designed for use inside and outside the home. Please ensure
fingers are clear of the locking mechanism to reduce the risk of entrapment when
closing the Tri-Walker
NB. This equipment must be installed by a competent person.
VP174SS Blue Steel Tri Walker with Bag 115 kg (18 St.) weight limit
VP174RS Red Steel Tri Walker with Bag 115 kg (18 St.) weight limit
VP174SS/N Blue Steel Tri Walker No Bag 115 kg (18 St.) weight limit
VP174RS/N Red Tri Walker No Bag 115 kg (18 St.) weight limit
VP172AA Red Aluminium Tri Walker with Bag,Basket&Tray 133kg (21 St.) weight limit
VP172AB Blue Aluminium Tri Walker with Bag,Basket&Tray 133kg (21 St.) weight limit
VP172AC Silver Aluminium Tri Walker with Bag,Basket&Tray 133kg (21 St.) weight limit
Do not exceed the maximum load; doing so could put the user at risk.
FEATURES
User friendly loop brakes lever with lock
Soft plastic solid wheels
Swivelling front wheel
Height adjustment
User friendly height adjustment

Fixing and Maintenance Instructions Ver.1 12/2012 (2758)
3
Ergonomic handgrips to reduce pressure
Optional bag or basket attachment
ASSEMBLY INSTRUCTIONS
1. Carefully remove all packaging. Check the product thoroughly for
damage or obvious faults.
If you suspect the unit to be faulty, please do not use, but contact your
supplier immediately for service.
2. Carefully insert the brake assembly (fig. 1) within the frame.
3. Ensure when brake assembly is inserted that both brakes are even in
height and the tri-walker is sitting evenly on the ground.
4. Insert screw through brake assembly into main frame via locating holes
as per Fig. 2 at the height required.
5. Fig. 4b shows the correct assembly. The screw should be inserted into
the six-sided hole as shown in Fig. 4a. The six sided hole is located on
the inside of the frame.
6. As per Fig. 3 and Fig. 3a add plastic washer and hand tighten plastic
thumb wheel.
7. It is very important that the side locking knobs (see fig.3a) are properly
tightened so that the tube will not slip down when normal weight is
applied to the handles.
Fig. 1 Fig. 2
Fig. 3 Fig. 3a

Fixing and Maintenance Instructions Ver.1 12/2012 (2758)
4
Fig. 4a Fig. 4b
LOCKING MECHANISM
1. Open out the tri-walker frame by pulling the
grip handles outwards in opposite directions
forming a ‘V’ shape. Once this is completed
pull/push the central locking bracket so the
plates are parallel.
Ensure the frame is locked before using it
and never use a semi-closed position as
this may lead to the frame collapsing.
2. To close your tri-wheeled walker push open
the central locking bracket and then apply
pressure to the outside of the handgrips and
the walker will fold. Please ensure fingers are clear of the locking
mechanism to reduce the risk of entrapment when closing the Tri-Walker.
OPERATING THE BRAKES
1. To stop, gently apply a gripping pressure to both brakes simultaneously
(fig.6), this will slow down and stop your tri-walker.
2. The brakes on your tri-walker have a park option (Fig. 6a). To operate the
park option, push downwards on both brakes simultaneously. You will feel
the brake make a very slight click. Your brakes are now in the ‘lock’ position.
3. To unlock, simply pull up the brake again, you will hear a slight click as the
‘park’ disengages (Fig. 6b).
Fig. 6 Fig. 6a Fig. 6b
Central Locking Bracket
Fig. 5

Fixing and Maintenance Instructions Ver.1 12/2012 (2758)
5
FITTING THE CARRY BAG (Should be already fitted)
1. The Tri-walker bag should be fitted when the walker is set in the open
position.
2. Take the strap situated upon the upper side of the tri-walker bag, and wrap
this around the diagonal bar of the frame (fig. 7) and push the stud fasteners
together. Repeat on the opposite side.
3. Take the strap on the side of the tri-walker bag and wrap this around the
vertical bar of the frame (fig. 7a) and again push the stud fasteners together.
Fig. 7 Fig. 7a
ADJUSTMENT TO BRAKES
1. Your brake system will require periodic adjustment. The brake adjustment is
similar to bicycle brakes.
2. Fig. 8 shows the brake handle in its default delivered position. Should the
brakes need adjusting they can be tightened by unlocking Nut A and then
unscrewing (anti-clockwise) Nut B. When the brake arm (see Fig. 8b) has a
3 mm clearance then Nut A should be retightened. An example of a user
adjusted brake handle is shown in Fig. 8a.
3. When adjusted the brakes should work in both normal braking and in
parking mode. If needed then Nut B in Fig 8/8a can be turned further anti-
clockwise, which will tighten the brake cable more.
4. If the brake handles are fully adjusted and more tightening is required refer
to Fig. 8b where further adjustment can be made.
5. After adjustment check the park brakes by pushing down on the brake
handles, ensuring that both brakes lock in the park position.
6. With the brakes off, lift the two ‘braked’ wheels off the ground and spin to
ensure they turn freely. If either of the braked wheels rubs onto the brake
arm, please check for obstructions and repeat the brake adjustment
procedure above.
7. It is important that you check brake adjustments on a regular basis to take
into account wear and tear. However, brake adjustment must be checked at
least once a month and definitely prior to a change of user.

Fixing and Maintenance Instructions Ver.1 12/2012 (2758)
6
Fig. 8 Fig. 8a
Fig. 8b
NB. Wheel design may vary.
CARE AND MAINTENANCE & YOUR OBLIGATION
1. Only use your Tri-walker for the purpose for which it is intended, which is an
aid to walking. It is intended that your Tri-walker is only used on standard
pavements or at home and should not be used on rough terrain or pot holed
surfaces. The use of you tri-walker on these surfaces can seriously
compromise your safety.
2. Check that all wheels and the folding mechanism function correctly and that
all wheels move freely. Pay particular attention to the front wheel, ensuring
that it rotates freely and without obstruction.
3. Check the central locking bracket (see fig.5), always make sure that this is
securely in place before using.
Withdraw your Tri-walker immediately if the central locking bracket will
not locate or if any of the wheels become difficult to turn or wobble or
if you suspect damage or any other fault.
4. Monthly Checks –check that the side locking levels are properly secure (fig.
3a).
a. Check that no components are loose.
b. Check the brakes; ensure that the brakes are correctly adjusted.

Fixing and Maintenance Instructions Ver.1 12/2012 (2758)
7
Do not fit any parts or accessories to your Tri-walker manufactured by
any other company. To do so will annul your warranty and, may
seriously compromise your safety.
5. We suggest that you check your tri-walker visually every day. However we
recommend that you should have your tri-walker serviced every three
months or less if used or issued to various users. Servicing should be
carried out at an approved service station or directly by Aidapt.
REISSUE
If you reissue or are about to reissue this product, please thoroughly check all
components for their safety.
This includes:
Bent or damaged tubes or cracks at the tube joints
Brake adjustment
Loose or worn horseshoe clips
Elongated adjustment holes
Loose handles
Loose or worn Wheels and wheel fasteners (where fitted)
Smooth, worn or split ferrules (rubber tips)
Replace all worn, missing or damaged parts where necessary. If in any doubt,
please do not issue or use, but immediately contact your supplier for service
support.
CLEANING
A useful guide to decontamination is MHRA leaflet DB2003(06).
Do not use abrasive cleaners as this could damage the surface of the equipment. For
cleaning, wipe with a clean cloth soaked in detergent solution and wring out.
Depending on the detergent manufacturer’s instructions the solution may be heated.
Wipe all surfaces of the equipment and the cloth should be re-immersed periodically
and the detergent changed frequently. The detergent should be rinsed or wiped off
using a clean cloth immersed in clean water and wrung out.
To disinfect make sure the equipment has been cleaned and dried and then wipe
over with a clean cloth and a compatible liquid disinfectant. After disinfecting clean
with clean water and dry.
When using detergent or disinfectants then please refer to manufacturers’
instructions and if unsure then consult your local Infection Control Specialist for
advice.
After cleaning or disinfecting treat all joints with a water dispersing agent, e.g. WD40.
WARRANTY
This product carries a 12 month warranty from the date of purchase against
manufacturing defects.
Misuse or Damage is not covered.
This warranty does not affect your statutory rights.

Fixing and Maintenance Instructions Ver.1 12/2012 (2758)
8
IMPORTANT INFORMATION
The information given in this instruction booklet must not be taken as forming part of
or establishing any contractual or other commitment by Aidapt Bathrooms Limited,
Aidapt (Wales) Ltd or its agents or its subsidiaries and no warranty or representation
concerning the information is given.
Please exercise common sense and do not take any unnecessary risks when using
this product; as the user you must accept liability for safety when using the product.
Please do not hesitate to contact the person who issued this product to you or the
manufacturer (detailed below) if you have any queries concerning the assembly/use
of your product.
TECHNICAL SPECIFICATIONS
Steel Tri Walkers
Maximum User Weight (kg) 115kg (18 stone)
Height to Top of Handgrips (mm) 830-990 (7 Height Adjustments)
Footprint (mm) Closed: 760x210
Open: 650x670
Net Weight (kg) Walker only: 5.5
With bag: 5.95
Aluminium Tri Walkers
Maximum User Weight (kg) 133kg (21 stone)
Height to Top of Handgrips (mm) 830-990 (7 Height Adjustments)
Footprint (mm) Closed: 650x250
Open: 570x650
Net Weight (kg) 5.24
Aidapt Bathrooms Ltd, Lancots Lane, Sutton Oak, St Helens,
WA9 3EX
Telephone: [phone] •Fax: [phone] •Web: www.aidapt.com
Email: [e-mail]