aidapt VG887 Programming manual

EN
Memory Foam Pillow with Gel
VG887
Usage and Maintenance Instructions

Usage and Maintenance Instructions Ver.2 08/2012 (2196)
2
BEFORE USE
Carefully remove all packaging. Avoid using any knives or other sharp instruments as this may
damage the surface of the product.
Check the product for any visible damage If you see any damage or suspect a fault, do not use
your product as it may compromise your safety, but contact your supplier for support.
Before use rem0ve cover and leave to air out for 48 hours. Once sufficiently aired replace cover
and use as desired.
INTENDED USE
The Contour Memory Foam Pillow has been designed to offer improved comfort to those who
need additional head support in bed.
CLEANING
Cover
The cover can be removed and washed at a low heat with similar colours
Foam Inner
Clean using a mild detergent with a slightly damp, soft cloth only. Only use a mild detergent or
disinfectant; never use an abrasive cleaner. Do not soak the foam inner.
After cleaning, leave the cushion and cover to dry in a warm, dry place, but not in direct contact with a
heat source.
CARE & MAINTENANCE
Please make a safety check of the product at regular intervals or if you have any concerns.
IMPORTANT INFORMATION
The information given in this instruction booklet must not be taken as forming part of or establishing any
contractual or other commitment by Aidapt Bathrooms Limited, Aidapt (Wales) Ltd or its agents or its
subsidiaries and no warranty or representation concerning the information is given.
Please exercise common sense and do not take any unnecessary risks when using this product; as the user
you must accept liability for safety when using the product.
Please do not hesitate to contact the person who issued this product to you or the manufacturer (detailed
below) if you have any queries concerning the assembly/use of your product.
Aidapt Bathrooms Ltd, Lancots Lane, Sutton Oak, St Helens, WA9 3EX
Telephone: [phone] •Fax: [phone] •Web: www.aidapt.com
Email: [e-mail]