AJAX Systems StreetSiren User manual

Outdoor Siren User Manual
Outdoor Siren is a wireless outdoor alerting device with a sound volume of
up to 113 dB. Equipped with a bright LED frame and pre-installed battery,
Outdoor Siren can be quickly installed, set up, and operate autonomously
up to 5 years.
Connecting to the Ajax security system via the secured Jeweller radio
protocol, Outdoor Siren communicates with the hub at a distance of up to
1,500 m in line of sight.
The device is set up via the Ajax apps for iOS, Android, mac OS, and
Windows. The system notifies users of all events through push
notifications, SMS, and calls (if activated).
Outdoor Siren operates with Ajax hubs only and does not support connecting via uart
Bridge or oc Bridge Plus integration modules.
The Ajax security system can be connected to a central monitoring station
of a security company.

Functional elements
1. LED frame
2. Light indicator
3. Siren buzzer behind the metal net
4. Smart Bracket attachment panel
5. External power supply connection terminals
6. QR code
7. On/off button
8. Place of fixing the Smart Bracket panel with a screw
Operating Principle
Outdoor Siren significantly improves the efficiency of the security system.
With a high probability, its loud alarm signal and light indication is sufficient
to attract the attention of neighbours and deter intruders.
The siren can be seen and heard from far away due to the powerful buzzer
and bright LED. When installed properly, it is hard to dismount and switch
off the actuated siren: its body is sturdy, the metal net protects the buzzer,
the power supply is autonomous, and the on/off button is locked during the
alarm.
To detect removal or tearing off from the surface, Outdoor Siren uses the
built-in accelerometer (motion detector). When someone tries to move the
device —the alarm goes off.

Connecting
Before starting the connection:
1. Following the hub user guide, install the Ajax app. Create an account, add
the hub, and create at least one room.
2. Switch on the hub and check the internet connection (via Ethernet cable
and/or GSM network).
3. Make sure that the hub is disarmed and does not update by checking its
status in the Ajax app.
Only users with administrator rights can pair the device with the hub
Pairing the device with the hub:
1. Select Add Device in the Ajax app.
2. Name the device, scan or type the QR code (located on the detector body
and packaging), and select the location room.
3. Tap Add —the countdown will start.

4. Switch on the device by holding the power button for 3 seconds.
The on/off button is recessed into the body of the siren and quite tight, you can use a thin solid
object to press it.
For detecting and pairing to occur, the device should be located within the
coverage of the wireless network of the hub (at the same protected object).
The connection request is transmitted briefly: at the moment of switching
on the device.
Outdoor Siren switches off automatically after failing to connect to the hub.
To retry the connection, you do not need to switch it off. If the device has
already been assigned to another hub, switch it off and follow the standard
pairing procedure.
The device connected to the hub appears in the list of devices in the app.
The update of the detector statuses in the list depends on the device ping
interval set in the hub settings (the default value is 36 seconds).
Please note that only 10 sirens can be connected to one hub

States
1. Devices
2. Outdoor Siren
Parameter
Value
Temperature
The temperature of the device which is measured on the
processor and changes gradually
Jeweller Signal Strength
The signal strength between the hub and device
Connection
The connection status between the hub and device

Battery Charge
Battery level of the device
Lid
The tamper button state, which reacts to the opening of
the device body
Routed Through ReX
Displays the status of using the ReX range extender
External Power
The external power supply state
Alarm Volume
Volume level in case of alarm
Alarm Duration
Duration of the alarm sound
Alert if moved
The state of the accelerometer alarm
Armed mode indication
The state of armed mode indication
Beep when arming/disarming
The state of indication of security mode changing
Beep on delay
The state of beeping arming/disarming delays
Beep Volume
The volume level of the beeper
Firmware
Siren firmware version
Device ID
Device identifier
Settings
1. Devices
2. Outdoor Siren

3. Settings
Setting
Value
First field
Device name, can be edited
Room
Selecting the virtual room to which the device is assigned
Alarms in group mode
Selecting the security group to which the siren is assigned.
When assigned to a group, the siren and its indication are
related to alarms and events of this group. Regardless of the
group selected, the siren will respond to Night Mode activation
and alarms.
Alarm Volume
Choosing one of the three volume* levels: from 85 dB —the
lowest to 113 dB —the highest
*the volume level was measured at a distance of 1 m

Alarm Duration (sec)
Settling the time of the siren alarm (from 3 to 180 seconds per
alarm)
Alarm if moved
If active, the accelerometer reacts to moving or tearing off
from the surface
Armed mode indication
If activated, the siren LED blinks once every 2 seconds when the
security system is armed
Beep when arming/disarming
If activated, the siren indicates arming and disarming by LED
frame blink and a short sound signal
Beep on delay
If activated, the siren will beep delays (available from 3.50 FW
version)
Beep Volume
Selecting the volume level of the siren beeper when notifying
about arming/disarming or delays
Volume test
Starting the siren volume test
Jeweller Signal Strength Test
Switching the device to the signal strength test mode
Attenuation Test
Switching the siren to the signal fade test mode (available in
devices with firmware version 3.50 and later)
User Guide
Opens the siren User Guide
Un pair Device
Disconnects the siren from the hub and deletes its settings
Indication
Event
Indication
Alarm
Emits an acoustic signal (the duration depends on the settings)
and the LED frame blinks red
Switching on
The LED frame blinks once

Switching off
The LED frame lights up for 1 second, then blinks three times
Registration failed
The LED frame blinks 6 times in the corner then full frame
blinks 3 times and the siren switches off
Security system is armed (if
indication activated)
The LED frame blinks one time and the siren emits a short
sound signal
Security system is disarmed (if the
indication is activated)
The LED frame blinks two times and the siren emits two short
sound signals
Siren in the armed mode (if the
indication is activated)
The LED frame corner lights up every 2 seconds
When Outdoor Siren is powered externally, its LED frame
glows permanently in the corner (for firmware version 3.41.0
and higher)
Low battery
The LED frame corner lights up and goes out when the system
is armed/disarmed, the alarm goes off, in case of dismounting
or unauthorized opening
Performance Testing
The Ajax security system allows conducting tests for checking the
functionality of connected devices.
The tests do not start straight away but within a period of 36 seconds when
using the standard settings. The test time start depends on the settings of
the detector polling period (the Jeweller menu settings in hub settings).
Installing
The location of the siren depends on its remoteness from the hub, and
obstacles hindering the radio signal transmission: walls, floors, large
objects.
Check the Jeweller signal strength at the installation location

If the signal level is low (one bar), we cannot guarantee stable operation of
the detector. Take all possible measures to improve the quality of the
signal. At least, move the detector: even a 20 cm shift can significantly
improve the quality of signal reception.
If the detector has low or unstable signal strength even after moving, use
a ReX Radio signal range extender.
Outdoor Siren is protected from dust/moisture (IP54 class), which means it
can be placed outdoors. The recommended installation height is 2.5 meters
and higher. Such a height hinders access to the device for intruders.
When installing and using the device, follow the general electrical safety
rules for electrical appliances, as well as the requirements of regulatory
legal acts on electrical safety.
It is strictly prohibited to disassemble the device under voltage! Do not use the device with a
damaged power cord.
Mounting
Before mounting Outdoor Siren, make sure that you have selected the
optimal location and it is in compliance with the guidelines of this manual!

Installation process
1. If you are going to use an external power supply (12 V), drill a hole for the
wire in Smart Bracket. Before installation, make sure that there the wire
insulation is not damaged!
You need to drill a hole in the mounting panel to lead out the external power supply wire.
2. Fix Smart Bracket to the surface with bundled screws. If using any other
attaching hardware, make sure that they do not damage or deform the
panel.
Using the double-sided adhesive tape is not recommended either for a temporary nor permanent
fixing.
3. Put Outdoor Siren on the Smart Bracket panel and turn it clockwise. Fix the
device with a screw. Fixing the siren to the panel with a screw makes it
difficult for intruders to remove the device quickly.
Do not install the siren:
1. near metal objects and mirrors (they can interfere with the RF signal and
cause it to fade);
2. in the places where its sound can be muffled;
3. Closer than 1 m from the hub.

Maintenance
Check the operational capability of Outdoor Siren regularly. Clean the siren
body from dust, spider web, and other contaminants as they appear. Use a
soft dry napkin suitable for tech equipment.
Do not use any substances containing alcohol, acetone, gasoline, and
other active solvents to clean the detector.
Outdoor Siren can operate up to 5 years from pre-installed batteries (with
the detector ping interval of 1 minute) or approximately 5 hours of constant
signalling with buzzer. When the battery is low, the security system notifies
the user, and the LED frame corner smoothly lights up and goes out when
arming/disarming or when the alarm goes off, including dismounting or
unauthorized opening.
Tech specs
Type of notification
Sound and light (LEDs)
Sound notification volume
85 dB to 113 dB at a distance of 1 m (adjustable)
Operating frequency of the piezo
annunciator
3.5 ± 0.5 kHz
Protection against dismounting
Accelerometer
Frequency band
868.0 –868.6 MHz or 868.7 –869.2 MHz depending on the
region of sale
Compatibility
Operates only with Hub, Hub Plus, Hub 2 and ReX
Maximum RF output power
Up to 25 mW
Modulation of the signal
GFSK
Radio signal range
Up to 1,500 m (any obstacles absent)
Power supply
4 × CR123A, 3 V

Battery life
Up to 5 years
External supply
12 V, 1.5 A DC
Body protection level
IP54
Operating temperature range
From -25°С to +50°С
Operating humidity
Up to 95%
Overall dimensions
200 × 200 × 51 mm
Weight
528 g
Certification
Security Grade 2, Environmental Class III in conformity with
the requirements of EN 50131-1, EN 50131-4, EN 50131-5-3
Complete Set
1. Outdoor Siren
2. Smart Bracket mounting panel
3. Battery CR123A (pre-installed) –4 pcs
4. Installation kit
5. Quick Start Guide
Warranty
Warranty for the “AJAX SYSTEMS MANUFACTURING” LIMITED
LIABILITY COMPANY products is valid for 2 years after the purchase and
does not apply to the pre-installed battery. If the device does not work
correctly, you should first contact the support service —in half of the
cases, technical issues can be solved remotely!