AKG D12 VR User manual

D12 VR
BEDIENUNGSANLEITUNG .........................................2
Bitte vor Inbetriebnahme des Gerätes lesen!
USER INSTRUCTIONS ............................................10
Please read the manual before using the equipment!
MODE D’EMPLOI ...................................................18
Veuillez lire cette notice avant d’utiliser le système!
ISTRUZIONI PER L’USO..........................................26
Prima di utilizzare l’apparecchio, leggere il manuale!
MODO DE EMPLEO ................................................34
¡Sirvase leer el manual antes de utilizar el equipo!
INSTRUÇÕES DE USO ............................................42
Favor leia este manual antes de usar o equipamento!

10 D12 VR
Table of Contents
1Safety and Environment .....................................................11
Environment .........................................................................11
2Description .........................................................................12
Introduction ..........................................................................12
Contents...............................................................................12
Optional Accessories.............................................................12
Description ...........................................................................12
Connections / Controls / Display ............................................13
Microphone operation ...........................................................14
3Application..........................................................................15
Bass Drum ...........................................................................15
4Cleaning..............................................................................15
Microphone ..........................................................................15
5Specifications.....................................................................16
Table of Contents

D12 VR 11
Safety and Environment
A
TTENTION
Risk of damage
Please make sure that the piece of equipment your microphone will
be connected to fulfills the safety regulations in force in your country
and is fitted with a ground lead.
xWhen the product reaches the end of its life, separate the
housing, electronics and cables and dispose of all components in
accordance with local waste disposal regulations.
xThe packaging can be recycled. Dispose of the packaging in a
suitable collection system.
1Safety and Environment
Environment

12 D12 VR
Description
Thank you for purchasing an AKG product. This Manual contains
important instructions for setting up and operating your equipment.
Please take a few minutes to read the instructions below carefully
before operating the equipment. Please keep the Manual for future
reference. Have fun and impress your audience!
xD12 VR microphone
xMicrophone carry-case
xFrequency response chart
xUser manual
For optional accessories, refer to the current AKG catalog or folder, or
visit www.akg.com. Your dealer will be glad to help.
The D12 VR is a large-diaphragm cardioid dynamic microphone.
Designed specifically for kick-drum recording applications, the
microphone has a thin diaphragm to enhance the low frequency
performance.
Without phantom power, the microphone delivers the pure character of
the sound source. With phantom power enabled, one of three
switchable active-filter presets can be used to quickly adapt the
microphone response to suit the desired kick-drum. The filter setting
can be controlled using a switch on the microphone body. In this mode
the output level is also reduced by 10 dB automatically.
2Description
Introduction
Contents
Optional Accessories
Description

D12 VR 13
Description
Active filter operation:
The implementation of an active electronic filter in a dynamic
microphone is an AKG patented solution. “Phantom Power” must be
supplied from the connected mixing desk in order to power the active
filter circuitry. The operating principle of the active filters is based on
analogue circuitry combined with a transformer. Frequency processing
is performed in the filter circuit and then combined with the audio
signal in the transformer. Impedance differences between the
microphone and other equipment are cancelled out enabling a perfect
sound regardless of the connected device. The resulting sound is
especially impressive at high signal levels at which the transformer
enhances the audio signal.
xStandard 3-pin male XLR connector
x3-way sliding switch for active filter selection
x3 LEDs to indicate the switch position
Connections /
Controls /
Display

14 D12 VR
Description
a Without phantom power the D12 VR operates as a normal
dynamic microphone. The three active filters are bypassed and do
not affect the audio signal.
b When connected to a standard phantom power supply (P48V) the
output level is automatically reduced by 10 dB and one of three
active filter presets can be selected using the three-way switch.
1) Switch in left position (green LED)
The midrange filter is applied as
in Position 2 and a low-end
boost enhances the power of
the kick drum.
Recommended for use with
open kick drums.
2) Switch in centre position (red LED)
A mid-range attenuation filter is
active, providing more space for
other instruments in the mix.
Recommended for achieving a vintage sound.
3) Switch in right position (blue LED)
The mid-range and low-end filters are applied as in positions 1
and 2 as well as a high-end boost to enhance the presence of
the kick.
Recommended for use with closed kick drums.
The switch position is clearly represented by the colour coded LEDs
and hence the filter selection can be determined with ease.
Microphone operation

D12 VR 15
Application / Cleaning
Most engineers agree that it is beneficial to remove the front head
when miking up the bass drum. A full drum sound is obtained by
placing the microphone just outside the drum. The further inside, the
drier and less boomy the sound and the better the acoustic separation
of the bass drum from the rest of the kit. Pointing the microphone right
toward the beater produces a harder sound culminating in a "click"
when the microphone is as close as 1 or 1.5 inches to where the
beater strikes the head. Directing the microphone away from this
point, toward the rim of the head, will mellow the sound.
xUse a soft cloth moistened with water to clean the surface of the
microphone body.
3Application
Bass Drum
4Cleaning
Microphone

16 D12 VR
Specifications
Transducer Principle: dynamic pressure gradient transducer
Polar Pattern: cardioid
Frequency Range: 17 - 17.000 Hz (±2 dB)
Sensitivity at 1000 Hz passive: 1,2 mV/Pa ± -58 dBV
Electrical Impedance at 1000 Hz: < 200 Ohm
Recommended Load Impedance: > 1.000 Ohm
Maximum SPL for 0,5 % THD: 164 dB SPL
Climatic Conditions: temperature range: -10 °C - +70 °C
relative humidity at +20 °C: 90 %
Connector Type: three-pin male standard XLR
Connector Wiring: pin 1: ground pin
pin 2: AF (in phase)
pin 3: AF (out phase)
Housing Material: metal
Finish: front grille: glossy galvanized nickel matte,
rear grille: matte black paint
Dimensions (H x W x D): 125 mm x 101 mm x 66 mm
Weight: 500 g
This product conforms to the standards listed in the Declaration of Conformity. To order a free copy of
the Declaration of Conformity, visit http://www.akg.com or contact sal[email protected].
Frequency Response Curve Polar Pattern
Green - switch position left
Red - position middleswitch
Blue - positionswitch right
D12 VR 0°
D12 VR 180°
5Specifications

Technische Änderungen vorbehalten. Specifications subject to change without notice. Ces caractéristiques sont susceptibles de modifications. Ci
riserviamo il diritto di effettuare modifiche tecniche. Nos reservamos el derecho de introducir modificaciones técnicas. Especificações sujeitas a
mudanças sem aviso prévio.
Printed in Austria on recycled paper 11/12/9100 U 13710
Mikrofone · Kopfhörer · Drahtlosmikrofone · Drahtloskopfhörer · Kopfsprechgarnituren · Akustische Komponenten
Microphones · Headphones · Wireless Microphones · Wireless Headphones · Headsets · Electroacoustical Components
Microphones · Casques HiFi · Microphones sans fil · Casques sans fil · Micros-casques · Composants acoustiques
Microfoni · Cuffie HiFi · Microfoni senza filo · Cuffie senza filo · Cuffie-microfono · Componenti acustici
Micrófonos · Auriculares · Micrófonos inalámbricos · Auriculares inalámbricos · Auriculares con micrófono · Componentes acústicos
Microfones · Fones de ouvido · Microfones s/fios · Fones de ouvido s/fios · Microfones de cabeça · Componentes acústicos
AKG Acoustics GmbH
Lemböckgasse 21–25, A-1230 Vienna/AUSTRIA, phone: [phone]*
e-mail: [email protected]
For other products and distributors worldwide visit www.akg.com


www.akg.com



vw3+   
+++.9
W
Ü,,+!)!








-Ü+
The D12 VR is a large-diaphragm c
a
enhance the low frequency perform
a
Without phantom power, the microp
perfect for loud wind instruments an
transformer from the 1970´s and a
p
switch on the microphone body. In t
h
Active filter operation:
The implementation of an active ele
c
“Phantom Power” must be supplied
The operating principle of the active
Frequency processing is performed
transformer. Impedance differences
a perfect sound regardless of the c
o
The resulting sound is especially im
signal.

-,

» Patented analogue
» Cardioid polar patt
e
» Dynamic passive
m
» Ultra thin diaphrag
m
» Optimized bass ch
a
» 3 active sound sha
p
» Zero latency calcul
a
» Original C414 tran
s

W
D
a
rdioid dynamic microphone. The microphone ha
a
nce.
hone delivers the pure character of the sound so
u
d also for vocal use. The warm sound is realized
p
atented discrete circuitry. The filter setting can b
e
h
is mode the output level is also reduced by 10 d
c
tronic filter in a dynamic microphone is an AKG
from the connected mixing desk in order to pow
e
filters is based on analogue circuitry combined
w
in the filter circuit and then combined with the au
between the microphone and other equipment a
r
o
nnected device.
pressive at high signal levels at which the transf
o
processing unit
e
rn
m
ode
m
a
mber
p
es s/P48 power
a
tor
s
forme
r
s a thin diaphragm to
u
rce. This setting is
by the original C 414
e
controlled using a
B automatically.
patented solution.
e
r the active filter circuitry.
w
ith a transformer.
dio signal in the
r
e cancelled out enabling
o
rmer enhances the audio

AKG Acoustics GmbH Lemb
ö
AKG Acoustics, U.S. 8400 B
a
© 2012 HARMAN International Industries, In
c
registered in the United States and/or other
c
Features, specifications and appearance are
www.akg.com
vw3+-EBLWMB9U,aEBMrB
9
•Transducer Principle: dy
•Polar Pattern: cardioid
•Frequency Range: 17-1
7
•Sensitivity at 1000 Hz p
a
•Electrical Impedance at
1
•Recommended Load Im
p
•Maximum SPL for 0.5%
T
•Climatic Conditions: tem
relative humidity at +20°
C
•Connector Type: three-p
•Connector Wiring: pin 1:
•Housing Material: metal
•Grill Material: springstee
•Finish: front grille glossy
•Dimensions: H 125mm ,
•Weight: 500g
Included accessories:
Item Number:
ö
ckgasse 21–25, 1230 Vienna, AUSTRIA
a
lboa Boulevard, Northridge, CA 91329, U.S.A.
c
orporated. All rights reserved. AKG is a trademark of AKG
A
c
ountries.
subject to change without notice.
9
fMYWd
namic pressure gradient transducer
7
.000 Hz (± 2 dB)
a
ssive: 1.2 mV/Pa ± –74dBV
1
000 Hz: <200 ohms
p
edance: >1000 ohms
T
HD: 164dB SPL
perature range: –10°C to +70°C;
C
: 90%
in male standard XLR
ground, pin 2: AF (in phase), pin 3: AF (out phas
l wire mesh
galvanized nickel matte, rear grille matte black p
W 101mm , D 66mm
Neoprene transport case, user manual, f
o
D12VR 3220Z00010

A
coustics GmbH,
e)
aint
o
am case

D12VR 3220Z00010
AKG Service Department, Lemböckgasse 21-25, A-1230 Wien, Austria.Tel.: [phone], FAX: [phone], e-mail: [email protected] 01/13
AKG Acoustics GmbH A-1230 Wien,
Lemböckgasse 21-25,
Tel.: [phone],
Fax: [phone]
www.akg.com
1/2
Cable routingCable routing
wiring
3.1
14

D12VR 3220Z00010
AKG Service Department, Lemböckgasse 21-25, A-1230 Wien, Austria.Tel.: [phone], FAX: [phone], e-mail: [email protected] 01/13
AKG Acoustics GmbH A-1230 Wien,
Lemböckgasse 21-25,
Tel.: [phone],
Fax: [phone]
www.akg.com
2/2
D12 Parts list / Stückliste
Description Pos. Part number
Bestellnummer
Quant./
Stück Bezeichnung
Wire mesh cap back 1 3220M10010 1 Gitterkappe hinten
Wire mesh cap front 2 3220M11010 1 Gitterkappe vorne
Windscreen 3 3220Z14010 1 Windschutz
Windscreen 3.1 3220Z14020 1 Windschutz
Mainboard holder 4 3220Z15010 1 Printhalter
Mainboard 5 3220M01010 1 Hauptprint
Screw EJOT PT KB 20x6 6 0099N20060 2 Schraube EJOT PT KB 20x6
Switch actuator 7 3220Z16010 1 Schalterteil
Pin 1x8 8 0007D10080 2 Stift 1x8
Capsule DKC29 9 1756Z00130 1 Kapsel DKC29
Thread pin 10 3220Z23010 2 Gewindestift
Screw M3x8 11 0965D30030 1 Schraube M3x8
Slider 12 3220Z22010 1 Schieber
Lightguide 13 3220Z24010 1Lichtflöte
Cable 14 3220Z27010 1Kabel
Pivot 15 3220Z17010 1 Gelenk
Screw black 16 3220Z20010 1 Schraube schwarz
Washer 1 17 3220Z19010 1 Scheibe 1
Washer 2 18 3220Z18010 1 Scheibe 2
Nut 19 3220Z21010 1 Mutter
Thread adapter 20 1649Z00030 1 Gwindeadapter
XLR connector 21 0016E18130 1 XLR Einsatz
Screw M2,5x8 22 0966D25030 1 Schraube M2,5x8
Contact part 24 3220Z26010 1 Kontaktteil
Etui 1605P00500 1 Etui