Allen-Bradley 20F User manual

PowerFlex 750-Series AC Drives
Catalog Numbers 20F, 20G, 21G
Installation Instructions
Original Instructions

Important User Information
Read this document and the documents listed in the additional resources section about installation, configuration, and
operation of this equipment before you install, configure, operate, or maintain this product. Users are required to
familiarize themselves with installation and wiring instructions in addition to requirements of all applicable codes, laws,
and standards.
Activities including installation, adjustments, putting into service, use, assembly, disassembly, and maintenance are
required to be carried out by suitably trained personnel in accordance with applicable code of practice.
If this equipment is used in a manner not specified by the manufacturer, the protection provided by the equipment may
be impaired.
In no event will Rockwell Automation, Inc. be responsible or liable for indirect or consequential damages resulting from
the use or application of this equipment.
The examples and diagrams in this manual are included solely for illustrative purposes. Because of the many variables and
requirements associated with any particular installation, Rockwell Automation, Inc. cannot assume responsibility or
liability for actual use based on the examples and diagrams.
No patent liability is assumed by Rockwell Automation, Inc. with respect to use of information, circuits, equipment, or
software described in this manual.
Reproduction of the contents of this manual, in whole or in part, without written permission of Rockwell Automation,
Inc., is prohibited
Throughout this manual, when necessary, we use notes to make you aware of safety considerations.
Labels may also be on or inside the equipment to provide specific precautions.
WARNING: Identifies information aboutpractices or circumstances that can cause an explosion ina hazardous
environment, which may lead to personal injury or death, property damage, or economic loss.
ATTENTION: Identifies information about practices or circumstances that can lead topersonal injury or death, property
damage, or economic loss. Attentions help you identify ahazard, avoid a hazard, and recognize the consequence.
IMPORTANT Identifies information that iscritical for successful application and understanding of the product.
SHOCK HAZARD: Labels may be on or inside the equipment, for example, a drive or motor, to alert people that dangerous
voltage may be present.
BURN HAZARD: Labels may be onor insidethe equipment, for example, adriveormotor,toalert people thatsurfacesmay
reach dangerous temperatures.
ARC FLASH HAZARD: Labels may be on or inside the equipment, for example, a motor control center, to alert people to
potentialArcFlash.ArcFlashwillcausesevereinjuryor death. WearproperPersonalProtectiveEquipment(PPE).FollowALL
Regulatory requirements for safe work practices and for Personal Protective Equipment (PPE).

Rockwell Automation Publication 750-IN001P-EN-P -April 2017 3
Table of Contents
Preface
Summary of Changes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Installation Instructions in Other Languages . . . . . . . . . . . . . . . . . . . . 10
Commonly Used Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Installation and Service Tools. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Line to Load Installation Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Additional Resources . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Chapter 1
Read the General Precautions Qualified Personnel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Personal Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Product Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Class 1 Light-emitting Diode Product. . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Chapter 2
Prepare for Installation Wall Mount Frames 1…7 Drive Rating Cross-references. . . . . . . . . . 19
Floor Mount Frames 8…10 Drive Rating Cross-references . . . . . . . . 21
CE Conformity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Low Voltage Directive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
EMC Directive. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
General Considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Installation Requirements Related to EN 61800-5-1
and the Low Voltage Directive. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Installation Requirements Related to EN 61800-3
and the EMC Directive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Access Panels, Covers, and Doors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Minimum Clearances. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Mounting Considerations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Wall Mount Frames 1…7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Floor Mount Frames 8…10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
All Mounting Styles and Frames . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Environmental Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Chapter 3
Lift and Mount the Drive Drive Weights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Recommended Mounting Hardware. . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Attach Lifting Hardware. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Enclosure Code F. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Enclosure Code N . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Enclosure Code G . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Open Type Drive (Removed from Cabinet) . . . . . . . . . . . . . . . . . 43
Enclosure Codes B and L. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Enclosure Codes J, K, and Y . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Release Floor Mount Drive Cabinet from Shipping Skid. . . . . . . . . . 46

4Rockwell Automation Publication 750-IN001P-EN-P -April 2017
Table of Contents
Remove Drive Cabinet Lifting Angle . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Install IP20, NEMA/UL Type 1 Debris Screen,
or Optional Exhaust Hood. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Install IP54, NEMA 12 Cabinet Blower Assembly
and Exhaust Hood . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Install Floor Mount Drive with Cabinet Options Bay
and Wiring Bay . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Position the Drive Cabinets and Cabinet Options Bay. . . . . . . . 49
Position the Wiring Bay. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Join the Cabinets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Approximate Dimensions – Wall Mount Frames 1…7 and
Floor Mount Frames 8…10. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Approximate Dimensions – Floor Mount Drives with
Cabinet Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
Release Drive Assembly from Cabinet. . . . . . . . . . . . . . . . . . . . . . . . . . 124
Fiber-optic Cables. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127
Disconnect Drive Control Pod Wiring Connections . . . . . . . . . . . . 127
Disconnect Wire Connections – No Drive Control Pod . . . . . . . . 129
Disconnect Control and Power Wire Harnesses . . . . . . . . . . . . . . . . 131
AC Input Drives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131
Disconnect DC Bus Fuse Wire Harness . . . . . . . . . . . . . . . . . . . . . . . . 131
AC Input Drives Floor Mount Frames 9 and Larger . . . . . . . . . 131
Common DC Input Drives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132
Release Cabinet Options Assembly from Cabinet . . . . . . . . . . . . . . . 133
Prepare the Roll-out Cart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135
Adjust Roll-out Cart Height Using Threaded Studs
and Nuts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137
Adjust Roll-out Cart Height Using Spacers . . . . . . . . . . . . . . . . . 138
Adjust Roll-out Cart Reach . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143
Remove Drive Assembly or Cabinet Options Assembly. . . . . . . . . . 144
Drive Assembly – Floor Mount Frames 8…10. . . . . . . . . . . . . . . 147
Cabinet Options Assembly – Floor Mount Frames 9 and 10 . 148
Remove DC Back Bus Guard – Common DC Input Drives . . . . . 150
Reinstall Drive Assembly or Cabinet Options Assembly . . . . . . . . . 151
Chapter 4
Power Wiring Grounding Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153
Recommended Grounding Scheme . . . . . . . . . . . . . . . . . . . . . . . . 153
Shield Termination – SHLD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154
RFI Filter Grounding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154
Power Cable Types Acceptable for 200…600 Volt Installations. . . 155
Wire Recommendations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155
Motor Considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155
Terminal Block Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155
Three-phase Terminal Locations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157
Wall Mount Frames 1…7 AC Input Power Terminals . . . . . . . . . . . 159

Rockwell Automation Publication 750-IN001P-EN-P -April 2017 5
Table of Contents
Wall Mount Frames 5…7 Common DC Input
Terminal Locations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 161
Wall Mount Frames 5…7 Common DC Input
Power Terminals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 163
Floor Mount Frames 8…10 Bus Bar Locations . . . . . . . . . . . . . . . . . . 164
Floor Mount Cabinet Options Bay . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167
Floor Mount Frames 8…10 Power Wiring Options . . . . . . . . . . . . . 169
Floor Mount Frames 8…10 Power Terminal L-brackets . . . . . . . . . 170
Additional Power Terminal L-Brackets. . . . . . . . . . . . . . . . . . . . . 170
Recommended Motor Cable Spacing – Floor Mount
Frames 8 and Larger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172
Fuse and Circuit Breaker Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 175
Motor Overload Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 192
Short Circuit Current Rating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 192
Short Circuit Current Ratings – Floor Mount Drives
with Cabinet Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 192
Input Contactor Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 196
Output Contactor Precaution. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 197
Bypass Contactor Precaution. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 197
Applying and Removing Power. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 197
Drives with Cabinet Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 197
Power Disconnects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 197
Contactors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 198
Reactors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 198
Terminal Blocks and Other Cabinet Parts . . . . . . . . . . . . . . . . . . 198
Transformer Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 199
Power Wiring Schematic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 199
Input Power Circuit Breakers and Disconnect Switches . . . . . . . . . 200
Cabinet Options Bay Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 204
Drive Power Jumper Configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . 215
MOV, AC EMI Capacitor, and Common Mode
Capacitor Circuits. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 215
Wall Mount Frames 2…5 Power Jumper Screw
Removal and Storage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 218
Wall Mount Frames 1, 6, and 7 Power Jumper
Wire Removal and Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 219
Floor Mount Frames 8…10 Drive Assembly Jumper
Removal and Storage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 222
Chapter 5
I/O Wiring I/O Terminal Blocks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 226
Access Drive Control Pod. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 228
PowerFlex 753 Main Control Board . . . . . . . . . . . . . . . . . . . . . . . . . . . 232
PowerFlex 755 Main Control Board . . . . . . . . . . . . . . . . . . . . . . . . . . . 235
Wall Mount Frames 1…7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 235
Floor Mount Frames 8…10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 236
Hardware Enable Circuitry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 237

6Rockwell Automation Publication 750-IN001P-EN-P -April 2017
Table of Contents
Safety Enable Circuitry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 239
PowerFlex 755 Fiber-optic Interface Board . . . . . . . . . . . . . . . . . . . . . 240
AC Input Drive Control and Power Terminal Block . . . . . . . . . . . . 241
Shunt Trip Contact Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . 242
Common DC Input Drive Control and Power
Terminal Blocks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 242
DC Precharge Board. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 243
Cabinet Door Interlock and Door Switch . . . . . . . . . . . . . . . . . . 243
120V Output Wiring for Drive Control. . . . . . . . . . . . . . . . . . . . 244
Control Transformer Connections – Common
DC Input Drives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 246
Uninterruptible Power Supply Connections – Common
DC Input Drives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 247
120/240V AC Power Supply Connections – Common
DC Input Drives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 248
PowerFlex 753 Main Control Board I/O Wiring Examples . . . . . . 249
Drive Device Ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 252
Option Module Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 253
11-Series I/O Option Module. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 254
11-Series I/O with ATEX Option Module . . . . . . . . . . . . . . . . . 256
11-Series I/O Option Module Wiring Examples . . . . . . . . . . . . . . . . 257
22-Series I/O Option Module. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 265
22-Series I/O Option Module Wiring Examples . . . . . . . . . . . . . . . . 267
Safe Torque Off Option Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 272
Important Safe Torque Off Option Module
Installation Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 272
Integrated Safety - Safe Torque Off Option Module. . . . . . . . . . . . . 273
Cabling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 274
Power Supply Requirements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 274
Safe Speed Monitor Option Module . . . . . . . . . . . . . . . . . . . . . . . . . . . 275
Important Safe Speed Monitor Option Module
Installation Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 276
Auxiliary Power Supply Option Module . . . . . . . . . . . . . . . . . . . . . . . 277
DeviceNet Option Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 279
ControlNet Option Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 280
Dual-port EtherNet/IP Option Module . . . . . . . . . . . . . . . . . . . . . . . 281
PROFIBUS Option Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 282
BACnet/IP Option Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 283
20-COMM Carrier . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 284
Frame 1 Drives Installation Recommendations. . . . . . . . . . . . . . 284
Frame 2 and Larger Drives Installation Recommendations . . . 284
Single Incremental Encoder Option Module. . . . . . . . . . . . . . . . . . . . 285
Dual Incremental Encoder Option Module. . . . . . . . . . . . . . . . . . . . . 287
Wiring Examples – Single Incremental Encoder
Option Module Connections. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 288
Wiring Example – Dual Incremental Encoder
Option Module Connections. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 290

Rockwell Automation Publication 750-IN001P-EN-P -April 2017 7
Table of Contents
Universal Feedback Option Module – Only
PowerFlex 755 Drives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 291
Motor Power Cables. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 294
Feedback Device Resolution. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 294
Motor Feedback Wiring Examples. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 294
Control Pod Cable Routing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 304
Floor Mount Frames 8…10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 304
Control Wiring – Early Frame 8 Drives with
Cabinet Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 305
Control Wiring - Current Frame 8 Drives with
Cabinet Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 307
Control Wiring – Frame 9 and 10 Drives with
Cabinet Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 308
Enclosure Options – Floor Mount Frames 8…10. . . . . . . . . . . . . . . . 310
NEMA/UL Type 1 Enclosure – 2500 MCC Style Cabinet . . 310
NEMA Type 12 Enclosure – 2500 MCC Style Cabinet. . . . . . 310
Chapter 6
Integrated Motion Drives Configure Option Modules for Integrated Motion. . . . . . . . . . . . . . 311
Supporting Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 311
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 313

8Rockwell Automation Publication 750-IN001P-EN-P -April 2017
Table of Contents
Notes:

Rockwell Automation Publication 750-IN001P-EN-P -April 2017 9
Preface
Summary of Changes This manual contains new and updated information as indicated in the
following table.
Topic Page
Added line to load installation guidelines to help installers find information. 12
Added Frame 7, 270 kW drive, to the f1 column in the catalog number explanation table 17
Added Frame 7, 400 Hp drive, to the f2 column in the catalog number explanation table 17
Removed this footnote from table ‘g’ regarding jumper.
“480V drives must select code ‘A’. Jumpers are included for field reconfiguration as
desired.”
18
Added Frame 7 C477 and D477 drive rating codes to the wall mount Frames 1…7 drive
rating cross-references table 19
Added Frame 7 477 code to the RF emission compliance and installation requirements
table 26
Updated the maximum surrounding air temperature for:
• Frames 6 and 7, 12…456 A drives
• Frame 7, 477 A drives
37
Updated approximate drive weights for Frame 7 270 kW and 400 Hp drives 39
Added data to the 400 volt AC and 540 volt DC input protection devices - wall mount
Frames 1…7 table:
• Frame 7, 270 kW rating
• Circuit breaker, dual element time delay fuse column
177
Added data to the 480 volt AC and 650 volt DC input protection devices - wall mount
Frames 1…7 table:
• Frame 7, 400 Hp rating
• Circuit breaker, dual element time delay fuse column
181
Added data to the 600 Volt AC and 810 Volt DC input protection devices – wall mount
Frames 3…7 table:
• Circuit breaker, dual element time delay fuse column
185
Added an attention statement for the 11-Series I/O module when used in an Integrated
Motion on EtherNet/IP networks application. 254
Added an attention statement for the 22-Series I/O module when used in an Integrated
Motion on EtherNet/IP networks application. 265
Added terminal block and wiring specification for thenew Integrated Safety - Safe
Torque Off option module. 226
Corrected22-Series I/OModule TB1 HW Input PTCShortCircuitTripratingfrom= 300 Ω
to 80 Ω. 268
Added information for the new Integrated Safety - Safe Torque Off option module. 273
Added an important statement for PowerFlex® drives that support the use of the Dual
Incremental Encoder option module when used with the Safe Speed Monitor option
module.
287
Added an important statement for PowerFlex drives that support the use of the
Universal Feedback option module when used with the Safe Speed Monitor option
module.
291
Added an index. 313

10 Rockwell Automation Publication 750-IN001P-EN-P -April 2017
Preface
This document explains the basic steps for mechanical installation and for
connecting incoming power, the motor, and basic I/O to the PowerFlex 750-
Series Adjustable Frequency AC drive.
See Additional Resources on page 14 for a list of Rockwell Automation
publications that provide detailed drive information from wiring and
grounding recommendations, to troubleshooting and repair.
Installation Instructions in
Other Languages
The PowerFlex 750-Series AC drive installation instructions are also available
in these languages.
IMPORTANT This information is intended for qualified installers of adjustable frequency
AC drives.
English This instruction sheet is available in multiple languages at
http://rockwellautomation.com/literature.Select publication language and type “750-IN001“ in
the search field.
Deutsch Diese Anleitung steht in mehreren Sprachen unter
http://rockwellautomation.com/literaturezur Verfügung.WählenSieIhreSpracheaus,und geben
Sie „750-IN001“ in das Suchfeld ein.
Français Ces instructions sont disponibles dans différentes langues à l’adresse suivante:
http://rockwellautomation.com/literature. Sélectionner la langue puis taper « 750-IN001 » dans
le champ de recherche.
Italiano La presente scheda d’istruzione è disponibile in varie lingue sul sito
http://rockwellautomation.com/literature.Selezionare la lingua desiderata e digitare “750-
IN001“ nel campo di ricerca.
Español Puede encontrar esta hoja deinstrucciones en varios idiomas en
http://rockwellautomation.com/literature. Selecione el idioma de publicación y escriba “750-
IN001“ en el campo de búsqueda.
Português Esta folha de instruções está disponível em várias línguas em
http://rockwellautomation.com/literature. Seleccione a língua de publicação e entre com “750-
IN001“ no espaço de busca.
中文
(简体)
从以下网页可以获得本说明书的多种语言的版本 :
http://r ckwellaut mati n.c m/literature 。
请选择出版物的语言 , 并在搜索栏输入 “750-IN001” 印。
日本 本説明書シートの多言語版は Web サイト
http://rockwe automation.com/ iterature
にて入手できます。出版言語を選択し、検索フィールドに 「750-IN001」と
タイプしてください。
한국의 설치 지침은 여러 언어로 사용할 수 있습니다 http://
roc wellautomation.com/literature.
검색 필드에 출판 언어와 형식 ‘ 750 – IN001’를 선택하십시오 .
Русский Данное руководство на других языках можно найти по адресу
http://rockwellautomation.com/literature. Выберите язык и введите в окно поиска «750-
IN001».
中文
（繁體）
以下網頁提供本說明書的多國語言版本：
http://r ckwellaut mati n.c m/literature. 請選擇出版語言，並於搜尋
欄鍵入 “750-IN001” 即可。
Český Tato stránka s pokyny je k dispozici ve více jazykových verzích na adrese
http://rockwellautomation.com/literature. Zvolte jazyk publikace a do vstupního pole pro
vyhledávání zadejte „750-IN001“.
Polski Niniejsza instrukcja dostępna jest w wielu językach na stronie
http://rockwellautomation.com/literature.Wybrać język publikacji, w polu wyszukiwania
wpisać “750-IN001”.

Rockwell Automation Publication 750-IN001P-EN-P -April 2017 11
Preface
Commonly Used Tools Installation and Service Tools
Use these tools to install the drive.
IMPORTANT Do not lettoolsor hardwarecomponentsfall intoopen driveassemblies.Do
not energize the drive unless all tools and hardware components have been
removed from the drive assemblies and enclosure.
Tool Description Details
ESD-protected place of work Work surface, Floor cover, seat, and ground connections
ESD-protective clothing Wrist wrap, shoes, overall clothing (coat)
Multimeter Digital multimeter, capable of AC and DC voltage, continuity, resistance,
capacitancemeasurements,andforwarddiode bias tests.Flukemodel 87III
or equivalent.
Allen socket wrench 4 mm, 5 mm
Allen-socket wrench extension 254 mm (10 in.)
Flat-nose screwdriver 5 mm (0.19 in.), 6.4 mm (0.25 in.), 9.5 mm (0.375 in.), #1, #2
Hexalobular screw driver/bit #15, #20, #25, #40, #45
Hexagonal socket wrench 7 mm, 8 mm, 10 mm, 12 mm, 13 mm, 17 mm, 18 mm
Combination wrench 10 mm, 17 mm
Phillips screw driver/bit #2, 492-C
Pozidriv #2, M3 x 7
Torque wrench 1...12 N•m (8.8…106 lb•in)
Torque wrench 6...50 N•m (53…443 lb•in)
Roll-out cart 20-750-CART1-F8
IMPORTANT: The roll-out cart is required to remove Frame 8 and larger
drive assemblies from the enclosure.

12 Rockwell Automation Publication 750-IN001P-EN-P -April 2017
Preface
Line to Load Installation
Guidelines
This section provides direction for how and where to find information from
line to load on the successful installation and implementation of PowerFlex
750-Series drives.
Topic PowerFlex 750-Series Drives
AC supply source Wiring and Grounding Guidelines for Pulse-width Modulated (PWM) AC Drives Installation Instructions,
publication DRIVES-IN001
See Chapter 2 – System Configurations.
Input power
conditioning Wiring and Grounding Guidelines for Pulse-width Modulated (PWM) AC Drives Installation Instructions, publication DRIVES-IN001
See Chapter 2 – AC Line Impedance.
1321 Power Conditioning Products Technical Data, publication 1321-TD001
See this publication for line reactors and isolation transformers.
Input fusing and
circuit breakers PowerFlex 750-Series AC Drives Installation Instructions, publication 750-IN001
See Fuse and Circuit Breaker Ratings on page 175.
Input power wire and
cable Wiring and Grounding Guidelines for Pulse-width Modulated (PWM) AC Drives Installation Instructions, publication DRIVES-IN001
See Chapter 1 – Input Power Cables.
EMC filters PowerFlex 750-Series AC Drives Installation Instructions, publication 750-IN001
See Installation Requirements Related to EN 61800-3 and the EMC Directive on page 24.
Electrical interference Wiring and Grounding Guidelines for Pulse-width Modulated (PWM) AC Drives Installation Instructions,
publication DRIVES-IN001
See Chapter 6 – How Electromechanical Switches Cause Transient Interference.
Grounding Wiring and Grounding Guidelines for Pulse-width Modulated (PWM) AC Drives Installation Instructions,
publication DRIVES-IN001
See Chapter 3 – Grounding.
PowerFlex 750-Series AC Drives Installation Instructions, publication 750-IN001
See Grounding Requirements on page 153.
GND

Rockwell Automation Publication 750-IN001P-EN-P -April 2017 13
Preface
Jumpers PowerFlex 750-Series AC Drives Installation Instructions, publication 750-IN001
See Drive Power Jumper Configuration on page 215.
Mounting
considerations PowerFlex 750-Series AC Drives Installation Instructions, publication 750-IN001
See Minimum Clearances on page 36 and Mounting Considerations on page 37.
Environment Industry Installation Guidelines for Pulse-width Modulated (PWM) AC Drives Application Technique, publication
DRIVES-AT003
See this publication for informationfor different enclosure systems and environmental/location considerations
(to help protect against environmental contaminants), and power and grounding considerations.
PowerFlex 750-Series AC Drives Installation Instructions, publication 750-IN001
See Environmental Specifications on page 37.
Control and signal
cabling Wiring and Grounding Guidelines for Pulse-width Modulated (PWM) AC Drives Installation Instructions, publication DRIVES-IN001
See Chapter 4 – Wire Routing.
PowerFlex 750-Series AC Drives Installation Instructions, publication 750-IN001
See I/O Wiring on page 225.
Output power cabling Wiring and Grounding Guidelines for Pulse-width Modulated (PWM) AC Drives Installation Instructions,
publication DRIVES-IN001
See Chapter 1 – Motor Cables.
Output devices Wiring and Grounding Guidelines for Pulse-width Modulated (PWM) AC Drives Installation Instructions,
publication DRIVES-IN001
See Chapter 6 – Shielded or Armored Power Cable.
1321 Power Conditioning Products Technical Data, publication 1321-TD001
See this publication for load reactors, RWRs, and common mode chokes/cores.
1204 Terminator Instructions, publication 1204-IN002
See this publication for motor terminators.
PowerFlex 750-Series AC Drives Installation Instructions, publication 750-IN001
See Output Contactor Precaution on page 197.
Cable length Wiring and Grounding Guidelines for Pulse-width Modulated (PWM) AC Drives Installation Instructions,
publication DRIVES-IN001
See Chapter 5 – Length Restrictions for Motor Protection.
Encoder Wiring and Grounding Guidelines for Pulse-width Modulated (PWM) AC Drives Installation Instructions,
publication DRIVES-IN001
See Chapter 1 – Analog Signal and Encoder Cable.
Motor Wiring and Grounding Guidelines for Pulse-width Modulated (PWM) AC Drives Installation Instructions,
publication DRIVES-IN001
See Appendix A – Overview.
Topic PowerFlex 750-Series Drives
Esc
Sel
PowerFlex 750-
Series Drive PowerFlex 520-
Series Drive
(L3)(L2)(L1)GND
PE R S T
WVUGND
PE (T1) (T2) (T3)

14 Rockwell Automation Publication 750-IN001P-EN-P -April 2017
Preface
Additional Resources These documents contain additional information concerning related products
from Rockwell Automation.
You can view or download publications at
http://www.rockwellautomation.com/global/literature-library/overview.page.
To order paper copies of technical documentation, contact your local
Allen-Bradley distributor or Rockwell Automation sales representative.
Resource Description
PowerFlex 750-Series AC Drives Programming Manual,
publication 750-PM001 Provides detailed information on:
• I/O, control, and feedback options
• Parameters and programming
• Faults, alarms, and troubleshooting
PowerFlex 750-Series AC Drives Technical Data,
publication 750-TD001 Provides detailed information on: • Drive specifications
• Option specifications
• Fuse and circuit breaker ratings
PowerFlex 20-HIM-A6 / -C6S HIM (Human Interface
Module) User Manual, publication 20HIM-UM001 Provides detailed information on HIM components, operation, features.
PowerFlex 750-Series AC Drives Hardware Service
Manual – Frame 8 and Larger, publication 750-TG001 Provides detailed information on: • Preventive maintenance
•Componenttesting
• Hardware replacement procedures
PowerFlex 755 Drive Embedded EtherNet/IP Adapter
User Manual, publication 750COM-UM001 These publications provide detailed information on to
configure, use, and troubleshoot PowerFlex 750-Series
communication option modules and adapters.
PowerFlex 750-SeriesDrive DeviceNet Option Module
User Manual, publication 750COM-UM002
PowerFlex 7-Class Network Communication Adapter
User Manuals, publications 750COM-UMxxx
PowerFlex 750-Series Safe Torque Off User Manual,
publication 750-UM002 These publications provide detailed information on to
install, configure, and operate the 750-Series safety
option modules.
Safe Speed Monitor Option Module for PowerFlex
750-Series ACDrives Safety Reference Manual,
publication 750-RM001
Wiring and Grounding Guidelines for Pulse-width
Modulated (PWM) AC Drives, publication DRIVES-IN001 Provides basic information to properly wire and ground PWM AC drives.
PowerFlex AC Drives in Common Bus Configurations,
publication DRIVES-AT002 Provides basic information to properly wire and ground
PWM AC drives with a common bus.
Safety Guidelines for the Application, Installation, and
Maintenance of Solid-State Control, publication SGI-1.1 Provides general guidelines for the application, installation, and maintenance of solid-state control.
Guarding Against Electrostatic Damage, publication
8000-4.5.2 Provides practices for guarding against electrostatic damage (ESD)
Product Certifications website, http://
www.rockwellautomation.com/global/certification/
overview.page
Provides declarations of conformity, certificates, and
other certification details.

Rockwell Automation Publication 750-IN001P-EN-P -April 2017 15
Chapter 1
Read the General Precautions
Qualified Personnel
Personal Safety
ATTENTION: Only qualified personnel familiar with adjustable frequency AC
drives and associated machinery can plan or implement the installation,
start-up, and subsequent maintenance of thesystem. Failure to comply can
result in personal injury and/or equipment damage.
ATTENTION: To avoid an electric shock hazard, verify that the voltage on the
bus capacitors has discharged completely before servicing.
Frames 1…7: Measure the DC bus voltage atthe power terminal block by
measuring between the +DCand -DC terminals (seeFigure 95 and Figure 13 for
location) or between the +DC and -DC test point sockets, if equipped. Also
measure between the +DC terminal or test point and the chassis, and between
the -DC terminal or testpoint and the chassis. Thevoltage mustbe zero for all
three measurements.
Frames 8…10: Measure the DC bus voltage at theDC+ and DC- TESTPOINT
sockets on the front of the power module (see Figure 98 for location).
ATTENTION: Hazard of personal injury or equipment damage exists when
using bipolar input sources. Noise and drift in sensitiveinput circuitscan
cause unpredictable changes in motor speed and direction. Use speed
command parameters to help reduce input source sensitivity.
ATTENTION: Risk of injury or equipment damage exists. DPI™ or SCANport™
host products must not be directly connected together via 1202 cables.
Unpredictablebehaviorcan resultiftwo or more devices areconnected in this
manner.
ATTENTION: Thedrivestart/stop/enablecontrol circuitryincludessolid-state
components. If hazards due to accidental contact with moving machinery or
unintentional flow of liquid, gas,or solids exist, an additional hardwired stop
circuit can be required to remove the AC line to the drive. An auxiliary braking
method can be required.
ATTENTION: Hazard of personal injury or equipment damage due to
unexpected machine operation exists if the drive is configured to
automatically issue a Start or Run command. Do not use these functions
without consideringapplicable local, national, and international codes,
standards, regulations, or industry guidelines.

16 Rockwell Automation Publication 750-IN001P-EN-P -April 2017
Chapter 1 Read the General Precautions
Product Safety
Class 1 Light-emitting Diode
Product
ATTENTION: Anincorrectlyappliedorinstalleddrivecanresultin component
damage or a reduction in product life. Wiring or application errors such as an
under-sizemotor,incorrectorinadequateACsupply,acorrosiveenvironment,
or excessive surrounding air temperatures can result in malfunction of the
system.
ATTENTION: This drive contains ESD (Electrostatic Discharge) sensitive parts
and assemblies. Static control precautions arerequired whenyou install, test,
service, or repair this assembly. Component damage can result if ESD control
procedures are not followed. If you arenot familiar with static control
procedures, see Guarding Against Electrostatic Damage, publication 8000-
4.5.2, or any other applicable ESD protection handbook.
ATTENTION: If you configure an analog input for 0…20 mA operation and
drive it from a voltage source, you can cause component damage. Verify
proper configuration before you apply any input signals.
ATTENTION: Hazard of permanent eye damage exists when using optical
transmission equipment. This product emits intense light and invisible
radiation. Do not look into module ports or fiber-optic cable connectors.

Rockwell Automation Publication 750-IN001P-EN-P -April 2017 17
Chapter 2
Prepare for Installation
Catalog Number Explanation.
a
b
c
d
e
f1 f2
Drive
Code Type Frames
20F PowerFlex® 753 1…7
20G PowerFlex 755 1…10
21G PowerFlex 755 Drive with Options 8…10
Future Use
Input
Type
Code Description Frames
1AC Input with Precharge,
includes DC Terminals
1…5
8…10
4 DC Input with
Precharge 5…10
A AC Input with Precharge, no DC
Terminals 6…8(1)
(1) The DC Bus Bar kit (20-750-DCBB1-Fx) is available for Frames
6…7 AC input drives t hat require DC bus terminals.
Enclosure
Code Description Frames
R IP20, NEMA/UL Type Open, Frame 1 1
F(1)
(1) ForFrames6…7, auser installed flange kit (20-750-FLNG4-Fx)
is available to convert a Code N drive that provides a NEMA/UL
Type 4X/12 back.
Flange (NEMA/UL Type 4X/12 back) 2…5
G IP54, NEMA/UL Type 12 2…7
N(2)
(2) Frames 2…5 are IP20, Frames 6…7 are IP00.
IP20/IP00, NEMA/UL Type Open 2…7
B(3)
(3) Available as a drive with options (21G).
IP20, NEMA/UL Type 1,
600 mm (23.6 in.) Deep,
Standard Cabinet Color (RAL 7032) 8…10
J(3) IP54, UL Type 12,
800 mm (31.5 in.) Deep,
Standard Cabinet Color (RAL 7032) 8…10
K(3)
IP54, NEMA 12,
2500 MCC Style Cabinet and Options w/MCC
Power Bus, 800 mm (31.5 in.) Deep,
Standard Cabinet Color (RAL 7032)
8…10
L(3) IP20, NEMA/UL Type 1,
800 mm (31.5 in.) Deep,
Standard Cabinet Color (RAL 7032) 8…10
P(3)
IP20, NEMA/UL Type 1,
2500 MCC Style Cabinet and Options w/MCC
Power Bus, 800 mm (31.5 in.) Deep,
Standard Cabinet Color (RAL 7032)
8…10
W(3)
IP20, NEMA/UL Type 1,
2500 MCC Style Cabinet and Options w/MCC
Power Bus, 800 mm (31.5 in.) Deep,
CenterLine 2100 Gray (ASA49)
8…10
Y(3)
IP54, NEMA 12,
2500 MCC Style Cabinet and Options w/MCC
Power Bus, 800 mm (31.5 in.) Deep,
CenterLine 2100 Gray (ASA49)
8…10
T IP00, UL Open Type without ControlPOD 8…10
Voltage Rating
Code Voltage
C 400V AC/540V
DC
D 480V AC/650V DC
E 600V AC/810V DC
F 690V AC/932V DC (not UL Listed)
ND Rating
400V, 50 Hz Input
Code Amps kW
Frame
EnclosureCode
B,J,
L,T FGN
K, P,
W, Y R
2P1 2.1 0.75
–
222
–
1
3P5 3.5 1.5
5P0 5.0 2.2
8P7 8.7 4
011 11.5 5.5
015 15.4 7.5
022 22 11
–
030 30 15
333037 37 18.5
043 43 22
060 60 30 444
072 72 37 5
085 85 45 55
104 104 55
6
140 140 75
(1)
(1) For Frames 6…7, a user installed flange kit (20-750-FLNG4-Fx)
is available to convert a Code N drive that provides a NEMA/UL
Type 4X/12 back.
6
170 170 90
205 205 110
260 260 132
7
302 302 160
7367 367 200
456 456 250
460 460 250 8 – – – 8(2)
(2) Available as a drive with options (21G).
477 477 270 – (1) –7 –
540 540 315
8
–––
8(2)
567 567 315
650 650 355
750 750 400
770 770 400
910 910 500
99
(2)
1K0 1040 560
1K1 1090 630
1K2 1175 710
1K4 1465 800
1K5 1480 850
1K6 1590 900 10 10(2)
2K1 2150 1250
ND Rating
480V, 60 Hz Input
Code Amps Hp
Frame
Enclosure Code
B,J,
L, T FGN
K,P,
W, Y R
2P1 2.1 1
–
222
–
1
3P4 3.4 2
5P0 5.0 3
8P0 8.0 5
011 11 7.5
014 14 10
022 22 15
–
027 27 20
333034 34 25
040 40 30
052 52 40 444
065 65 50 5
077 77 60 55
096 96 75
6
125 125 100
(1)
(1) ForFrames 6…7,a userinstalled flange kit(20-750-FLNG4-Fx)
is available to convert a Code N drive that provides a NEMA/UL
Type 4X/12 back.
6
156 156 125
186 186 150
248 248 200
7
302 302 250
7361 361 300
415 415 350
430 430 350 8 –––8
(2)
(2) Available as a drive with options (21G).
477 477 400 – (1) –7 –
485 485 400
8
–––
8(2)
545 545 450
617 617 500
710 710 600
740 740 650
800 800 700
99
(2)
960 960 800
1K0 1045 900
1K2 1135 1000
1K3 1365 1100
1K4 1420 1250
1K5 1525 1350 10 10(2)
2K0 2070 1750
1…3 4 5 6 7 8…10 11 12 13 14 15 16 17 18
20G 1 A N D 248 A A 0 N N N N N -LD-P3-P11…
abcde ghif1…f4 Cabinet Options (21G)

18 Rockwell Automation Publication 750-IN001P-EN-P -April 2017
Chapter 2 Prepare for Installation
Catalog Number Explanation (continued).
f3 f4
g
h
i
PowerFlex 755 w/Options (21G)
Required Selections
PowerFlex 755 w/Options (21G)
Additional Selections
ND Rating
600V, 60 Hz Input
Code Amps Hp
Frame
Enclosure Code
B,J,
L, T FGN
K,P,
W,Y R
1P7 1.7 1
–
333
–
–
2P7 2.7 2
3P9 3.9 3
6P1 6.1 5
9P0 9 7.5
011 11 10
012(1)
(1) Required for uncontrolled common DC bus applications.
Optional for all AC applications.
12 10 – 6 6
017 17 15 3 3 3
018(1) 18 15 – 6 6
022 22 20 3 3 3
023(1) 23 20 –66
024(1) 24 20
027 27 25 4 4 4
028(1) 28 25 – 6 6
032 32 30 4 4 4
033(1) 33 30 – 6 6
041 41 40 5 5 5
042(1) 42 40 – 6 6
052 52 50 5 – 5
053(1) 53 50
(2)
(2) For Frames 6…7, a user installed flange kit (20-750-FLNG4-Fx)
is available to convert a Code N drive that provides a NEMA/UL
Type 4X/12 back.
66
063 63 60
077 77 75
099 99 100
125 125 125
144 144 150
192 192 200
77242 242 250
289 289 300
295 295 300
8
–––
8(3)
(3) Available as a drive with options (21G).
355 355 350
395 395 400
435 435 450
460 460 500
510 510 500
595 595 600
99
(3)
630 630 700
760 760 800
825 825 900
900 900 950
980 980 1000
1K1 1110 1100 10 10(3
)
1K4 1430 1400
ND Rating
690V, 50 Hz Input (not UL Listed)
Code Amps kW
Frame
Enclosure Code
B, J,
L, T FGN
K,P,
W, Y R
012 12 7.5
–
(1)
(1) For Frames 6…7, a user installed flange kit (20-750-FLNG4-Fx)
is available to convert a Code N drive that provides a NEMA/UL
Type 4X/12 back.
66
–
–
015 15 11
020 20 15
023 23 18.5
030 30 22
034 34 30
046 46 37
050 50 45
061 61 55
082 82 75
098 98 90
119 119 110
142 142 132
171 171 160
77212 212 200
263 263 250
265 265 250
8
––
8(2)
(2) Available as a drive with options (21G).
330 330 315
370 370 355
415 415 400
460 460 450
500 500 500
590 590 560
9
–
9(2)
650 650 630
710 710 710
765 765 750
795 795 800
960 960 900
1K0 1040 1000 10 10(2)
1K4 1400 1400
Filtering and CM Cap Configuration
Code Filtering Default CM Cap
Connection
A Yes Jumper Removed
JYes Jumper Installed
Dynamic Braking(1)
(1) Not available on Frames 8…10, specify Code ‘N’.
Code Internal Resistor(2)
(2) Frames 1…2 only. Internal Resistor kits (20-750-DB1-Dx) sold
separately.
Internal Transistor (3)
(3) Standard on Frames 1…5, optional on 6…7.
ANo Yes
NNo No
Door MountedHIM (Frames 8…10)
Code Operator Interface
0NoDoorMounted HIM
2EnhancedLCD,FullNumeric, IP20
4 Enhanced LCD, Full Numeric, IP66 NEMA Type 4X/12
Code Option Frames Type
LD Light
Duty
8…10 SystemOverload
Duty Cycle(1)
(1) Only one option of this type can beselected.
ND Normal
Duty
HD Heavy Duty
P3 Input Thermal-
magnetic
Circuit
Breaker
8…10 Power
Disconnect(1)
P5 Input Non-Fused
Molded
Case Disconnect
Switch
8 Only
P14 Wiring Only
Bay 8…10 Wiring Only Bay
Code Option Frames Type
P11 Input Contactor
8 Only Contactors(1)(2)
(1) Only one option of this type can beselected.
(2) Contactor options are not available for systems with MCCpower
bus.
P12 Output
Contactor
L1 3% Input Reactor
8…9
Reactors(1)
L2 3% Output Reactor
L3 5% Input Reactor
8 Only
L4 5% Output
Reactor
P20 1200 A Bus
8…10 MCC Power
Bus
Capacity(1)
P22 2000 A Bus
P24 3000 A Bus
P30 UPS Control Bus, DC
Input
w/Precharge only
8…10 UPS Control Bus
X1 Auxiliary
Transformer
(500VA available), IP20
Cabinet
Only
8 Only(3)
(3) Standard on all other cabinet configurations.
Auxiliary
Power
1…3 4 5 6 7 8…10 11 12 13 14 15 16 17 18
20G 1 A N D 248 A A 0 N N N N N -LD-P3-P11…
abcde ghif1…f4 Cabinet Options (21G)

Rockwell Automation Publication 750-IN001P-EN-P -April 2017 19
Prepare for Installation Chapter 2
Wall Mount Frames 1…7
Drive Rating Cross-references
Reference the drive nameplate with Tab le 1 or Ta ble 2 to determine the drive
rating for your wall mount drive.
Table 1 - Drive Rating Cross-reference for 400V and 480V Drives
Cat No. 20G11 N D 011 AA0NNNNN
UL Type 1 - only with Debris Hood and Conduit Plate
UL Open Type/IP20 - without Debris Hood and Conduit Plate
Specications and Custom Catalog Number
representing options installed at factory.
See Nameplate 2 (Located behind HIM)
for equivalent base catalog number and separate options
Nameplate 1:
Mfd. in 2016 on Jan. 19
Series: A
Input: 3 Phase, 47-63Hz
ACVoltage Range
Amps ND (HD)
Power ND (HD)
Output: 3 Phase, 0-400 Hz
ACVoltage Range
Base Frequency (default)
Continuous Amps ND (HD)
60Sec Ovld Amps ND (HD)
3 Sec Ovld Amps ND (HD)
0-400
50 Hz
342-440 432-528
0-460
60 Hz
xxx
xxx
xxx
xxx
xxx
xxx
xxx
xxx
xxx
xxx
xxx
xxx
xxx xxx xxx xxx
5.5 HP (4 HP) 7.5 HP (5 HP)
N223
Serial Number: xxxxxxxx
Original Firmware: x.xxx
Made in the U.S.A. Fac1C
400V Class 480V Class
12
Drive Nameplate 1, Wall Mount Frames 1…7
Drive Code
21
Input Voltage and Normal Duty Amp Rating Enclosure Code
400V AC 480V AC F G N R
20F or 20G C2P1 D2P1
2 2 2 1
Wall Mount Frame
20F or 20G C3P5 D3P4
20F or 20G C5P0 D5P0
20F or 20G C8P7 D8P0
20F or 20G C011 D011
20F or 20G C015 D014
20F or 20G C022 D022
–
20F or 20G C030 D027
3 3 320F or 20G C037 D034
20F or 20G C043 D040
20F or 20G C060 D052 444
20F or 20G C072 D065 5
20F or 20G C085 D077 5 5
20F or 20G C104 D096
6
20F or 20G C140 D125
N/A
6
20F or 20G C170 D156
20F or 20G C205 D186
20F or 20G C260 D248
7
20F or 20G C302 D302
7
20F or 20G C367 D361
20F or 20G C456 D415
20F or 20G C477 D477

20 Rockwell Automation Publication 750-IN001P-EN-P -April 2017
Chapter 2 Prepare for Installation
Table 2 - Drive Rating Cross-reference for 600V and 690V Wall Mount Drives
Cat No. 20G11 N D 011 AA0NNNNN
UL Type 1 - only with Debris Hood and Conduit Plate
UL Open Type/IP20 - without Debris Hood and Conduit Plate
Specications and Custom Catalog Number
representing options installed at factory.
See Nameplate 2 (Located behind HIM)
for equivalent base catalog number and separate options
Nameplate 1:
Mfd. in 2016 on Jan. 19
Series: A
Input: 3 Phase, 47-63Hz
ACVoltage Range
Amps ND (HD)
Power ND (HD)
Output: 3 Phase, 0-400 Hz
ACVoltage Range
Base Frequency (default)
Continuous Amps ND (HD)
60Sec Ovld Amps ND (HD)
3 Sec Ovld Amps ND (HD)
0-400
50 Hz
342-440 432-528
0-460
60 Hz
xxx
xxx
xxx
xxx
xxx
xxx
xxx
xxx
xxx
xxx
xxx
xxx
xxx xxx xxx xxx
5.5 HP (4 HP) 7.5 HP (5 HP)
N223
Serial Number: xxxxxxxx
Original Firmware: x.xxx
Made in the U.S.A. Fac1C
400V Class 480V Class
12
Drive Nameplate 1, Wall Mount Frames 1…7
Drive Code
21
Input Voltage and Normal Duty Amp Rating Enclosure Code
600V AC 690V AC F G N R
20F or 20G E1P7 –
333
–
Wall Mount Frame
20F or 20G E2P7
20F or 20G E3P9
20F or 20G E6P1
20F or 20G E9P0
20F or 20G E011
20F or 20G E012 F012 – 6 6
20F or 20G E017 – 333
20F or 20G E018 F015 – 6 6
20F or 20G E022 – 333
20F or 20G E023 F020 – 6 6
20F or 20G E024 F023
20F or 20G E027 – 444
20F or 20G E028 F030 – 6 6
20F or 20G E032 – 444
20F or 20G E033 F034 – 6 6
20F or 20G E041 – 555
20F or 20G E042 F046 – 6 6
20F or 20G E052 – 5 – 5
20F or 20G E053 F050
6 6
20F or 20G E063 F061
20F or 20G E077 F082
20F or 20G E099 F098
20F or 20G E125 F119
20F or 20G E144 F142
20F or 20G E192 F171
7 720F or 20G E242 F212
20F or 20G E289 F263