Allen + Roth 782.001.001 User manual

1
Serial Number Purchase Date
ATTACH YOUR RECEIPT HERE
welcoming • sophisticated • inspiring
allen + roth® is a registered trademark
of LF, LLC. All Rights Reserved.
Questions, problems, missing parts? Before returning to yourretailer, call ourcustomerservice
departmentat 1-866-439-9800, 8 a.m. - 8 p.m., EST, Monday - Friday.
WOVEN SIDEBOARD
ITEM #0697537
MODEL #782.001.001
Françaisp. 7.
Español p. 13
EB15544

2
PACKAGE CONTENTS
P
G
F
A
E
B
A
C
D
PART DESCRIPTION QUANTITY
ASide Apron 2
BBack Apron 1
CBottom Apron 1
1
1
1
D
E
F
Middle Apron
Top Apron
2
Door
G

3
Please read and understand this entire manual before attempting to assemble, operate or install
the product.
Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list and hardware contents list. If any part is missing or damaged, do not attempt to
assemble the product.
Estimated Assembly Time: 20 minutes
Tools required for assembly: Allen key (included).
SAFETY INFORMATION
HARDWARE CONTENTS (shown actual size)
PREPARATION
AA BB CC
EE
Long Bolt
Qty. 4
Short Bolt
Qty. 14
Washer
Qty. 18
Bolt Cap
Qty. 18
Allen Key
Qty. 1
WARNING
AC UTION
This item is heavy. Use care when handling. May require two adults for safe assembly.
Water allowed to accumulate inside the frames could freeze and damage the frame tubing. Such
damage is not covered under the warranty.
Assemble the item on a stable, non-abrasive surface such as carpeting to avoid damage.
Weight Capacity: 150 lbs.
DD

4
Lowes.com/allenandroth
1
ASSEMBLY INSTRUCTIONS
3
1.
3. Attach the door (D) to the bottom apron (C) by sliding
the preassembled pegs on door (D) into the pre-drilled
holes on bottom apron (C).
2. 2
3
Place the back apron (B) on a flat, non-abrasive surface.
Attach side apron (A) to back apron (B) where shown
using two short bolts (BB) and washers (CC). Hand tighten
only.
BB
CC x 2
Washer
x 2
Short Bolt
Hardware Used
Attach the bottom apron (C) to the assembly
where shown using six short bolts (BB) and
washers (CC). Hand tighten only.
Hardware Used
BB
CC x 6
Washer
x 6
Short Bolt
BB
CC
CC
BB
A
A
B
D
C

5
ASSEMBLY INSTRUCTIONS
6
4. Place the middle apron (E) on top of doors (D) and back
apron (B), sliding the holes pre-drilled on the middle apron
(E) over the pegs preassembled to doors (D). Then, secure
middle apron (E) where shown using six short bolts (BB) and
washers (CC). Hand tighten only.
6. Carefully insert glass (G) into the top frame (F).
Assembly is now complete.
5. Attach the top frame (F) to the side aprons (A) using
four long bolts (AA) and washers (CC). Hand tighten only.
Once all connections are made, go back and tighten all bolts
with Allen key (EE) and cover them with bolt caps (DD).
5
A
CC
G
Hardware Used
BB
CC x 6
Washer
x 6
Short Bolt
Hardware Used
AA
CC x 4
Washer
x 4
Long Bolt
4
E
F
DD Bolt Cap
x 18
BB
CC
CC AA
DD
EE
x 1
Allen Key