Allen + Roth WSCO-72C-AR User manual

1
ITEM #0020720
HARDWOOD CLOSET
SYSTEM
MODEL #WSCO-72C-AR
Questions, problems, missing parts? Before returning to your retailer, call our customer
service department at 1-866-942-5362, 8:30 a.m. – 4:30 p.m., PST, Monday to Friday.
ATTACH YOUR RECEIPT HERE
Serial Number _____________________ Purchase Date _________________________

2
TABLE OF CONTENTS
Hardware Contents ……………………………………………………………………………...…... 5
Assembly Instructions ……………………………………………………………………………….. 7
Warranty …………………………………….………………………………...…...……………...…. 17
Package Contents ……………………………………………………………………………..…….. 4
Safety Information ………………………………………………………………………………….... 3
Replacement Parts List ……………………………………………………...…...…………...……. 17

3
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate or install
the product. If you have any questions regarding the product, please call customer service at
1-866-942-5362, 8:30 a.m. – 4:30 p.m., PST, Monday to Friday.
Maximum weights indicated. Use with other products or products heavier than the
maximum weights indicated may result in instability causing possible injuries.
WARNING
MAXIMUM LOAD: 30 LBS
MAXIMUM LOAD: 100 LBS
CAUTION
 Unit must be attached securely to the wall for the safety and stability.
 Do not use drawers as a ladder.
 Do not step on drawers.

4
CAPPUCCINO UNIT
PACKAGE CONTENTS
R
N
O
Q
S
P
PART DESCRIPTION QUANTITY
AHutch Panel Left 1
BHutch Panel Right 1
CHutch Panel Top 1
DFront Stretcher 1
ERear Stretcher 1
FAdjustable Shelf 1
GHutch Panel Bottom 1
HHutch Panel Back 1
PART DESCRIPTION QUANTITY
IBase Panel Top 1
JBase Panel Left 1
KBase Panel Right 1
LBase Panel Bottom 1
MBase Panel Back 1
PART DESCRIPTION QUANTITY
NDrawer Panel Face 3
ODrawer Panel Front 3
PDrawer Panel Back 3
QDrawer Panel Left 3
RDrawer Panel Right 3
SDrawer Bottom 3
T
U
PART DESCRIPTION QUANTITY
TLong Shelf 2
UMetal Pole 3
C
H
B
E
D
F
G
A
I
M
K
J
L

5
HARDWARE CONTENTS (shown actual size)
MM
LL
AA
JJ
KK
II
Large
Cam Bolt
Qty. 26
Large
Cam Lock
Qty. 26
M4 x 16 mm
Wood Screw
Qty. 38
Pole Holder
Qty. 3
Closed
Pole Holder
Qty. 3
Large Flat
Washer
Qty. 2
M6 x 25 mm
Bolt
Qty. 12
M4 x 25 mm
Bolt
Qty. 6
M3 x 13 mm
Sunk Screw
Qty. 4
BB CC DD
FF
EE
M8 x 3 in.
Lag Bolt
Qty. 2
HH
Small Flat
Washer
Qty. 12
GG
M3 x 16 mm
Wood Screw
Qty. 96
NN OO
M4 x 38 mm
Wood Screw
Qty. 14
Small
Cam Lock
Qty. 24
Small
Cam Bolt
Qty. 24

6
HARDWARE CONTENTS (shown actual size)
PREPARATION
Before beginning assembly of this product, make sure all parts are present. Compare parts with
package contents list and hardware contents above. If any part is missing or damaged, do not
attempt to assemble the product. Contact customer service for replacement parts.
Estimated Assembly Time: 59 minutes
Tools Required for Assembly (not included): Phillips screwdriver, power drill, 3/16 in. bit, 3/8 in.
bit, and 1/2 in. socket wrench
PP QQ SS TT
L Bracket
Qty. 8 Anchor
Qty. 14
Shelf Holder
Qty. 4
Wood Dowel
Qty. 20
UU
RR
Plastic Corner
Qty. 2
Drawer Handle
Qty. 3

7
ASSEMBLY INSTRUCTIONS
L
Hardware Used
Insert wood dowel (QQ) in holes without threaded
inserts into base panel right (K). Attach base pan-
el bottom (L) to base panel right (K) by
connecting large cam lock (LL) with large cam bolt
(MM).
Operate cam kits in this way:
1) Screw cam bolts (MM) in base panel right (K)
2) Push cam locks (LL) in base panel bottom (L)
3) Connect both and secure cam locks (LL)
1
MM Large Cam Bolt
x 2
QQ Wood Dowel
x 2
1.
LL Large Cam Lock
x 2
2
Hardware Used
Insert wood dowels (QQ) into top holes of
base panel right (K). Attach base panel top (I)
to base panel right (K) by connecting large
cam bolts (MM) with large cam locks (LL).
Make sure both are flush with each other
from back side.
Operate cam kits in this way:
1) Screw cam bolts (MM) in base panel right
(K)
2) Push cam locks (LL) in base panel top (I)
3) Connect both and secure cam locks (LL)
x 2
Wood Dowel
x 2
2.
x 2
Large Cam Bolt
Large Cam Lock
MM
QQ
LL
LL
MM
QQ
LL
QQ
MM
K
I
K

8
ASSEMBLY INSTRUCTIONS
Hardware Used
4
Assemble base panel back (M) using M3 x 16
mm wood screws (BB) through pilot holes.
BB M3 x 16 mm
Wood Screw x 24
4.
BB
Hardware Used
Have base panel left (J) assembled by
connecting large cam bolts (MM) with large
cam locks (LL). After that, attach two plastic
corners (RR) only to front corners using
M4 x 16 mm wood screws (CC) to strengthen
base structure.
Operate cam kits in this way:
1) Screw cam bolts (MM) in base panel left (J)
2) Push cam locks (LL) in both base panel
bottom (L) and base panel top (I)
3) Connect both and secure cam locks (LL)
x 4
Wood Dowel
x 4
3.
x 4
3
Large Cam Bolt
Large Cam Lock
CC M4 x 16 mm
Wood Screw x 8
RR Plastic Corner x 2
MM
QQ
LL
MM
QQ
LL
CC
RR
J
M
L
I

9
ASSEMBLY INSTRUCTIONS
Hardware Used
Attach both drawer panel front (O) and
drawer panel back (P) to drawer panel right
(R) by connecting small cam bolts (OO) with
small cam locks (NN); attach drawer panel
left (Q) to both drawer panel front (O) and
drawer panel back (P) by connecting small
cam bolts (OO) with small cam locks (NN).
Operate cam kits in this way:
1) Screw cam bolts (OO) in drawer panel
right (R) and drawer panel left (Q)
2) Push cam locks (NN) in drawer panel
front (O) and drawer panel back (P)
3) Connect both and secure cam locks (NN)
NN Small Cam Lock x 8
OO x 8
Small Cam Bolt
5. 5
OO
NN
Hardware Used
6
Assemble drawer panel face (N) to drawer
frame using M6 x 25 mm bolts (FF) and
small flat washer (GG).
Note: There are four large holes in drawer
panel front (O) to go with four small ones in
drawer panel face (N) so drawer panel face
(N) could be moved around to align drawers
in the frame whenever necessary.
Repeat last two steps for other 2 drawers.
FF M6 x 25 mm
Bolt
x 4
GG x 4
Small Flat Washer
6.
FF
GG
O
R
Q
P
N
O

10
ASSEMBLY INSTRUCTIONS
8
Hardware Used
Attach drawer handle (UU) to drawer panel
face (N) using M4 x 25 mm bolts (DD).
DD M4 x 25 mm
Bolt x 2
8.
7
Hardware Used
Assemble drawer bottom (S) to the bottom
side of drawer frame using M3 x 16 mm
wood screw (BB) through pilot holes.
BB x 16
M3 x 16 mm
Wood Screw
7.
UU Drawer Handle x 1
BB
DD
UU
S
N

11
ASSEMBLY INSTRUCTIONS
9
Extend the drawer glide frames on both base
panel left (J) and base panel right (K) out
from the base. Align drawer glide frame and
drawer tracks together. Slide the drawer glide
tracks into the drawer glide frames until the
drawer is completely closed.
Note: If you are required to detach the drawer
from the unit, first extend the drawer glides all
the way out. Push the black plastic release
lever of the ball bearing glide up on one side
and down on the other side; then pull the
drawer completely out. This will prevent any
damage to the glides or drawers.
9.
Insert wood dowels (QQ) in holes without
thread inserts into hutch panel right (B).
Attach hutch panel bottom (G) to hutch
panel right (B) by connecting large cam
bolts (MM) with large cam locks (LL).
Operate cam kits in this way:
1) Screw cam bolts (MM) in hutch panel
right (B)
2) Push cam locks (LL) in hutch panel
bottom (G)
3) Connect both and secure cam locks
(LL)
10. 10
Hardware Used
MM Large Cam Bolt
x 2
QQ Wood Dowel
x 2
LL Large Cam Lock
x 2
MM
QQ
LL
Hold the lever
down and pull
G
B
K
J

12
ASSEMBLY INSTRUCTIONS
11
Insert wood dowels (QQ) in holes without
thread inserts into hutch panel right (B).
Assemble both front stretcher (D) and rear
stretcher (E) to hutch panel right (B) by
connecting large cam bolts (MM) with large
cam locks (LL).
Operate cam kits in this way:
1) Screw cam bolts (MM) in hutch panel
right (B)
2) Push cam locks (LL) in both stretchers
(D) and (E)
3) Connect both and secure cam locks (LL)
11.
Hardware Used
Large Cam Bolt
x 1
Wood Dowel
x 3
Large Cam Lock
x 3
12
Insert wood dowels (QQ) in holes without
thread inserts into hutch panel left (A). Have
hutch panel left (A) assembled by connecting
large cam bolts (MM) with large cam locks
(LL).
Operate cam kits in this way:
1) Screw cam bolts (MM) in hutch panel left
(A)
2) Push cam locks (LL) in both stretchers
(D) and (E)
3) Connect both and secure cam locks (LL)
12.
Hardware Used
Large Cam Bolt
x 3
Wood Dowel
x 5
Large Cam Lock
x 5
MM
QQ
LL
MM
QQ
LL
MM
QQ
LL
MM
QQ
LL
A
E
D
B
D

13
ASSEMBLY INSTRUCTIONS
13
Assemble hutch panel top (C) by using large
cam bolts (MM), large cam locks (LL), and
wood dowels (QQ). Make sure crown beveled
edges are located in front.
Operate cam kits in this way:
1) Screw cam bolts (MM) in hutch panel top
(C)
2) Push cam locks (LL) in both hutch panel
left (A) and hutch panel right (B)
3) Connect both and secure cam locks (LL)
13.
Hardware Used
Large Cam Bolt
x 4
Wood Dowel
x 4
Large Cam Lock
x 4
MM
QQ
LL
MM
QQ
LL
14
Assemble hutch panel back (H) to hutch
frame using M3 x 16 mm wood screw (BB)
via pilot holes.
14.
Hardware Used
BB M3 X 16 mm
Wood Screw
x 24
BB
H
C
A
B

14
ASSEMBLY INSTRUCTIONS
Insert wood dowels (QQ) in holes without
thread inserts into both base panel right (K)
and base panel left (J). Have both hutch and
base connected using large cam bolts (MM)
and large cam locks (LL).
Operate cam kits in this way:
1) Screw cam bolts (MM) in both base panel
right (K) and base panel left (J) as shown
2) Push cam locks (LL) in both hutch panel
left (A) and hutch panel right (B)
3) Connect both and secure cam locks (LL)
15.
Hardware Used
Large Cam Bolt
x 2
Wood Dowel
x 4
Large Cam Lock
x 4
15
MM
QQ
LL
QQ
MM
16
Place the drawer unit where you want it to
be positioned. This unit must be attached to
the wall. Locate a wall stud near the center
of the unit. Once the stud is located, mark
the center and measure from one wall.
Inside the unit near the top is the rear
stretcher (E) that will be used to attach the
unit to the wall. Mark the location of the wall
stud on the rear stretcher (E) and drill holes
through stretcher and back panel using
3/16 in. bit. Attach cabinet to wall by using
M8 x 3 in. lag bolts (HH) and large flat
washers (II). Lastly, secure M8 x 3 in. lag
bolts (HH) with 1/2 in. socket wrench.
16.
Hardware Used
II Large Flat Washer x 2
HH M8 x 3 in.
Lag Bolt x 2
II
HH
E
K
J
B

15
ASSEMBLY INSTRUCTIONS
17
Attach four L brackets (SS) to both ends of
long shelf (T) using M4 x 16 mm wood crews
(CC).
Level shelf in the desired location and mark
the holes locations on the side wall and
cabinet side. Drill holes at the marked
locations on the wall using 3/8 in. bit; next,
insert anchors (TT) into holes.
Secure one end of long shelf (T) to wall
using M4 x 38 mm wood screws (EE), and
the other end to cabinet side using M5 x 16
mm wood screws (CC).
Ensure shelf is level after assembling.
Repeat procedure to assemble the other long
shelf (T) at the other end.
17.
Hardware Used
SS L Bracket x 8
CC M4 x 16 mm
Wood Screw x 24
EE
TT
M4 x 38 mm
Wood Screw
Anchor x 8
SS
CC
EE TT
CC
CC
SS
x 8
T
T

16
ASSEMBLY INSTRUCTIONS
18
Level metal pole (U) at the desired location
and mark the holes’ locations in the side wall
and cabinet side; drill holes at the marked
locations on the wall using 3/8 in. bit. Next,
insert anchors into holes.
Secure a closed pole holder (KK) to side wall
using M4 x 38 mm wood screws (EE), and
pole holder (JJ) to cabinet side using M4 x 16
mm wood screws (CC). Ensure both holders
are at the same height.
Note: Place the center of the pole holder (JJ)
and closed pole holder (KK) at least 10-1/2
in. from the back wall so the coat hangers will
fit.
18.
Hardware Used
Pole Holder x 3
M4 x 16 mm
Wood Screw
x 6
M4 x 38 mm
Wood Screw x 6
Anchor x 6
Closed Pole Holder x 3
19
Assemble adjustable shelf (F) with shelf hold-
er (PP) at your desired height.
To ensure your safety, we suggest screwing
four M3 x 13 mm sunk screws (AA) through
shelf holder (PP) into adjustable shelf (F).
19.
Hardware Used
Shelf Holder
M3 x 13 mm
Sunk Screw
x 4
x4
CC
EE
TT
JJ
KK
AA
PP
TT
KK
EE
JJ
CC
AA PP
F

17
REPLACEMENT PARTS LIST
For replacement parts, call our customer service department at 1-866-942-5362, 8:30 a.m. – 4:30
p.m., PST, Monday to Friday.
PART DESCRIPTION PART #
AHutch Panel Left HPL
BHutch Panel Right HPR
CHutch Panel Top HPT
DFront Stretcher FS
ERear Stretcher RS
FAdjustable Shelf AS
GHutch Panel Bottom HPB1
HHutch Panel Back HPB2
PART DESCRIPTION PART #
IBase Panel Top BPT
JBase Panel Left BPL
KBase Panel Right BPR
LBase Panel Bottom BPB1
MBase Panel Back BPB2
C
H
B
E
D
F
G
A
WARRANTY
Warranty is restricted to original owner and proof of purchase will be required. Warranty is for one
(1) year from date of purchase. Should the product be defective in material or workmanship or fail
under normal use, we will repair or replace the unit at our discretion. Shipping charges to our
warehouse are the responsibility of the customer. Parts required will be sent to the customer at
no charge.
I
M
K
J
L

18
PART DESCRIPTION PART #
AA M3 x13 mm Sunk Screw 13SS
BB M3 x 16 mm Wood Screw 16WS1
CC M4 x 16 mm Wood Screw 16WS2
DD M4 x 25 mm Bolt 25B1
EE M4 x 38 mm Wood Screw 38WS
FF M6 x 25 mm Bolt 25B2
GG Small Flat Washer SFW
HH M8 x 3 in. Lag Bolt 3LB
II Large Flat Washer LFW
JJ Pole Holder PH
KK Closed Pole Holder CPH
PART DESCRIPTION PART #
LL Large Cam Lock LCL
MM Large Cam Bolt LCB
NN Small Cam Lock SCL
OO Small Cam Bolt SCB
PP Shelf Holder SH
QQ Wood Dowel WD
RR Plastic Corner PC
SS L Bracket LB
TT Anchor A
UU Drawer Handle DH
PART DESCRIPTION PART #
TLong Shelf LS
UMetal Pole MP
Printed in China
CAPPUCCINO UNIT
T
U
PART DESCRIPTION PART #
NDrawer Panel Face DPF1
ODrawer Panel Front DPF2
PDrawer Panel Back DPB
QDrawer Panel Left DPL
RDrawer Panel Right DPR
SDrawer Bottom DB
R
N
O
Q
S
P
LL MM NN
CC EE
OO
BB
SS TT
PP
AA
QQ
JJ KK
DD
UU
RR
II
HH
FF GG