Alliance Laundry Systems FLW63H User manual

Preventative Maintenance
www.alliancelaundry.com
Frontload
Washer
FLW63H
Part No. 11-15-413
November 2015

© Copyright 2015, Alliance Laundry Systems LLC
All rights reserved. No part of the contents of this book may be reproduced or transmitted in any form or by any means without
the expressed written consent of the publisher.
Table of Contents
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
11-15-413 1
Daily............................................................................................................................................................................2
Monthly ......................................................................................................................................................................4
Quarterly....................................................................................................................................................................7
Bi-Annually................................................................................................................................................................9
Daily Preventative Maintenance Checklist...........................................................................................................11
Monthly Preventative Maintenance Checklist .....................................................................................................11
Quarterly Preventative Maintenance Checklist ...................................................................................................12
Bi-Annually Preventative Maintenance Checklist ...............................................................................................12
IMPORTANT: Replace all panels that are removed to perform maintenance procedures. Do not operate the
washer with missing guards or with broken or missing parts. Do not bypass any safety devices.

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
211-15-413
Daily
IMPORTANT: Check that all safety and instruction labels are on the machine. Any missing or illegible safety
and/or instruction labels should be replaced immediately.
1. Check the door lock before starting operation:
a. Attempt to start the machine with the door open. The machine
should not start with the door open.
b. Close the door and start a cycle. The DOOR light on the control
panel will be lit. If the door lock is not functioning properly,
call a service technician.
FLW64H
2. Wipe the machine’s top, front and side panels clean as needed. If
detergent, bleach or other washing products are spilled on the
cabinet, wipe immediately. Some products will cause permanent
damage if spilled on cabinet. Thoroughly rinse and dry all
surfaces after cleaning them.
IMPORTANT: Use only a damp or sudsy cloth for cleaning the
control panel. Some cleaning products may harm the finish on
the control panel.
3. Clean the wash drum as necessary. It may need rinsing or wiping
after an unusual load has been washed.
4. Clean outside of window with household window cleaner as
necessary.
5. Inspect wash drum for water leaking into drum while the washer
is off. Replace the mixing valve if required.
FLW65H

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
11-15-413 3
Daily
6. Leave the loading door open at the end of each day to allow
moisture to evaporate.
NOTE: Unload the machine promptly after each completed
cycle to prevent moisture buildup. Leave the loading door open
after each completed cycle to allow moisture to evaporate.
FLW64H
7. Check coin slide, if applicable, for ease of operation. Replace if
needed.
FLW49H

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
411-15-413
Monthly
1. Inspect the water fill hose connections on the back of the
machine for leaks.
IMPORTANT: Immediately replace any hose showing signs of
deterioration. All hoses should be replaced every five years.
FLW66H
2. Clean the dispenser drawer. Pour hot water into the drawer,
making sure it flushes through each compartment. Use a small
brush to thoroughly clean out any residue.
FLW67H
3. Check the machine for leaks:
a. Start an unloaded cycle to fill the machine.
FLW68H

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
11-15-413 5
Monthly
b. Verify that the drain pump or drain valve is operating and that
the drain receptacle is free from obstruction.
FLW51H
NOTE: Disconnect power to the machine before performing
the following procedures.
4. Make sure hose clamps are tight.
a. Remove the front panel and check the pump hose connections
for leaks.
FLW69H
b. Check drain hose connection for leaks.
FLW70H

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
611-15-413
Monthly
c. Lift cabinet top and check inlet hose connections for leaks.
FLW71H
5. Pump Models – Check the foreign object trap in the pump. Clean
debris from trap if necessary.
Gravity Drain Models – Remove hose and clean drain valve if
necessary.
NOTE: Wipe dry any excess water on the base that may have
come out during this procedure.
FLW69H
6. Check the belt for uneven wear, frayed edges and proper belt
tension. Refer to the service manual for adjusting belt tension.
Call a qualified service person if belt needs replacing. Use only
authorized replacement parts.
7. Inspect door seal for damage.
8. Clean and remove foreign objects that have accumulated
between door seal and clothes guard.
FLW65H
9. Clean the lint from the motor with compressed air.
FLW72H
Hose
Connections
Foreign Object Trap
(Pump Models)

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
11-15-413 7
Quarterly
NOTE: Disconnect power to the machine before performing the following procedures.
1. Check hardware for any loose nuts, bolts or screws.
FLW46H
2. Check all painted surfaces for bare metal. If bare metal is
showing, paint it with porcelain touch-up paint (available from
the manufacturer).
FLW63H
3. Clean the coin drop/slide, if applicable.
a. Coin Drop – Remove the coin drop from the washer and refer
to the service manual for cleaning instructions.

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
811-15-413
Quarterly
FLW53H
b. Coin Slide – Check coin slide for ease of operation. If needed,
clean, dry and lubricate slide according to slide manufacturer’s
instructions.
FLW49H

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
11-15-413 9
Bi-Annually
1. Use the following procedure to clean the fill hose filter screens:
a. Turn off the water.
b. Unscrew the fill hose and remove the filter screen.
c. Clean the filter screen with soapy water and reinstall it.
Replace the filter screen if it is worn or damaged.
d. Turn on water and check for leaks.
IMPORTANT: If washer is filling with water slower than
normal, check filter screens at that time. Clean or replace them
if necessary.
FLW54H
2. Check screens in the mixing valve to make sure they aren’t
clogged.
a. Turn off the water.
b. Remove fill hoses from washer.
c. Remove screens from mixing valve.
d. Clean or replace screens if necessary.
e. If screens are clogged and difficult to remove, replace mixing
valve.
FLW73H
3. Check all hoses for visible signs of deterioration including
cracks, blisters, corrosion or material wear.
IMPORTANT: Immediately replace any hose showing signs of
deterioration. All hoses should be replaced every five years.
FLW55H

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
10 11-15-413
Bi-Annually
a. Check the fill hoses at the rear of machine.
b. Check the drain hose at the rear of machine.
FLW74H
NOTE: Disconnect power to the machine before performing
the following procedures.
4. Check for loose electrical connections.
5. Inspect cabinet panels for any damage. Replace or repair as
needed.
6. Make sure washer is level from side to side and front to back.
FLW47H

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
11-15-413 11
Daily Preventative Maintenance Checklist
Machine: Week of:
Operator: Days
Checks 1 2 3 4 5 6 7
Observe All Safety Warnings!
1. Check the door lock before starting operation:
a. Attempt to start the machine with the door open. The
machine should not start with the door open.
b. Close the door and start a cycle.
2. Wipe top, front and side panels clean as needed.
3. Clean the wash drum as necessary.
4. Clean outside of window with household window cleaner
as necessary.
5. Inspect wash drum for water leaking into drum while the
washer is off.
6. Leave the loading door open at the end of each day to
allow moisture to evaporate.
7. Check coin slide, if applicable, for ease of operation.
Monthly Preventative Maintenance Checklist
Machine: Month:
Operator:
Checks
Observe All Safety Warnings!
1. Inspect the water fill hose connections on the back of the
machine for leaks.
2. Clean the dispenser drawer.
3. Check the machine for leaks:
a. Start an unloaded cycle to fill the machine.
b. Verify that the drain pump/drain valve is operating
and that the drain receptacle is free from obstruction.
4. Make sure hose connections and hose clamps are tight.
a. Check the pump hose connections for leaks.
b. Check drain hose connection for leaks.
c. Check inlet hose connections.
5. Check the foreign object trap in the pump/drain valve.
6. Check the belt for uneven wear, frayed edges and proper
belt tension.
7. Inspect door seal for damage.
8. Clean and remove foreign objects between door seal and
clothes guard.
9. Clean the lint from the motor with compressed air.
Laminate this checklist so that it can be re-used.

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
12 11-15-413
Quarterly Preventative Maintenance Checklist
Machine: Quarter:
Operator:
Checks
Observe All Safety Warnings!
1. Check hardware for any loose nuts, bolts or screws.
2. Check all painted surfaces for bare metal.
3. Clean the coin drop/slide, if applicable.
Bi-Annually Preventative Maintenance Checklist
Machine: Year:
Operator:
Checks
Observe All Safety Warnings!
1. Use the following procedure to clean the fill hose filter screens:
a. Turn off the water.
b. Unscrew the fill hose and remove the filter screen.
c. Clean the filter with soapy water and reinstall it. Replace the filter
screen if it is worn or damaged.
d. Turn on water and check for leaks.
2. Check screens in the mixing valve.
a. Turn off the water.
b. Remove the fill hoses.
c. Remove the screens.
d. Clean or replace screens.
e. Replace mixing valve if needed.
3. Check all hoses for visible signs of deterioration including cracks,
blisters, corrosion or material wear.
4. Check for loose electrical connections.
5. Inspect cabinet panels for any damage. Replace or repair as needed.
6. Make sure washer is level from side to side and front to back.
Laminate this checklist so that it can be re-used.