Alliance Laundry Systems WF150 User manual

WF150, WF185, WF235, WF305, WF400
Instruction manual
Washer Extractors
Technical specications
Installation instructions
Maintenance
for corresponding “CWF” and “IWF”
models, see page 6 for complete model
list
Part No. D0908R7
Code: 249/00383/10
January 2011

3
Contents
1
2
3
4
Contents
Model Numbers .............................................................................................. 6
Safety and Environmental Informations ...................................................... 8
Safety .......................................................................................................... 8
Environmental .............................................................................................. 9
Explanation of Safety Messages ............................................................... 10
Important Safety Instructions ..................................................................... 11
Operator Safety ......................................................................................... 13
Technical data and dimensions ................................................................. 14
Technical data WF150, IWF150, IWF033, CWF033 .................................. 14
Dimensions WF150, IWF150, IWF033, CWF033 ...................................... 15
Technical data WF185, IWF185, IWF040, CWF185, CWF040 ................. 16
Dimensions WF185, IWF185, IWF040, CWF185, CWF040 ...................... 17
Technical data WF235, IWF235, IWF055, CWF235, CWF055 ................. 18
Dimensions WF235, IWF235, IWF055, CWF235, CWF055 ...................... 19
Technical data WF305, IWF305, IWF075, CWF305, CWF075 ................. 20
Dimensions WF305, IWF305, IWF075, CWF305, CWF075 ...................... 21
Technical data WF400, IWF400, IWF090 .................................................. 22
Dimensions WF400, IWF400, IWF090 ...................................................... 23
Installation and Connection Instructions .................................................. 24
Surface ...................................................................................................... 24
Anchoring on a metal base ........................................................................ 24
Directly on the ground .............................................................................. 24
Mounting Bolt Hole Locations for machines, WF150, IWF150, IWF033,
CWF033 .................................................................................................... 25
Mounting Bolt Hole Locations for machines, WF185, IWF185, IWF040,
CWF185, CWF040 .................................................................................... 26
Mounting Bolt Hole Locations for machines, WF235, IWF235, IWF055,
CWF235, CWF055 .................................................................................... 27
Mounting Bolt Hole Locations for machines, WF305, IWF305, IWF075,
CWF305, CWF075 .................................................................................... 28
Mounting Bolt Hole Locations for machines, WF400, IWF400, IWF090 ... 29
Water connection ....................................................................................... 30
Water drain ................................................................................................ 31
Electrical Installation .................................................................................. 32
Main power connection .............................................................................. 34
Electrical Specifications WF150, IWF150, IWF033, CWF033 ................... 36
Electrical Specifications WF185, IWF185, IWF040, CWF185, CWF040 ... 37
Electrical Specifications WF235, IWF235, IWF055, CWF235, CWF055 ... 38
Electrical Specifications WF305, IWF305, IWF075, CWF305, CWF075 ... 39
Electrical Specifications WF400, IWF400, IWF090 ................................... 40
Liquid soap connection (option) ................................................................. 41
Connection of a central operating panel for coin machines (option) ......... 43

5
6
7
8
9
4
Steam connection ........................................................................................ 44
Technical remarks ....................................................................................... 45
Internal connections of the electrical heating ............................................ 45
Maintenance instruction of the machine ................................................... 46
End of day .................................................................................................. 46
General maintenance ................................................................................ 46
Periodical maintenance ............................................................................. 46
Annual maintenance .................................................................................. 47
Contact Information ..................................................................................... 48
Nameplate ................................................................................................. 48
Repair and after-sales service .................................................................... 50

5

1
6
Model Numbers
xWF150yy2yyyyyy
xWF185yy2yyyyyy
WF150
WF185
xWF033yy2yyyyyy
xWF040yy2yyyyyy
xWF235yy2yyyyyy
xWF305yy2yyyyyy
Build-up
Model numbers IWF033AN2
IWF033MN2
IWF033MC2
IWF033MD2
IWF033ME2
IWF033ML2
IWF033MX2
IWF033MY2
IWF033SC2
IWF033SD2
IWF033SE2
IWF033SR2
IWF033SL2
IWF033SX2
IWF033SY2
IWF040AN2
IWF040MN2
IWF040MC2
IWF040MD2
IWF040ME2
IWF040ML2
IWF040MX2
IWF040MY2
IWF040SC2
IWF040SD2
IWF040SE2
IWF040SR2
IWF040SL2
IWF040SX2
IWF040SY2
IWF055AN2
IWF055MN2
IWF055MC2
IWF055MD2
IWF055ME2
IWF055ML2
IWF055MX2
IWF055MY2
IWF055SC2
IWF055SD2
IWF055SE2
IWF055SR2
IWF055SL2
IWF055SX2
IWF055SY2
IWF075AN2
IWF075MN2
IWF075MC2
IWF075MD2
IWF075ME2
IWF075ML2
IWF075MX2
IWF075MY2
IWF075SC2
IWF075SD2
IWF075SE2
IWF075SR2
IWF075SL2
IWF075SX2
IWF075SY2
IWF150AN2
IWF150MN2
IWF150MC2
IWF150MD2
IWF150ME2
IWF150ML2
IWF150MX2
IWF150MY2
IWF150SC2
IWF150SD2
IWF150SE2
IWF150SR2
IWF150SL2
IWF150SX2
IWF150SY2
IWF150ZN2
IWF150ZC2
IWF150ZD2
IWF150ZE2
IWF150ZL2
IWF150ZX2
IWF150ZY2
WF235
WF305
xWF055yy2yyyyyy
xWF075yy2yyyyyy
xWF090yy2yyyyyy
xWF400yy2yyyyyy
WF400

1
7
IWF185AN2
IWF185MN2
IWF185MC2
IWF185MD2
IWF185ME2
IWF185ML2
IWF185MX2
IWF185MY2
IWF185SC2
IWF185SD2
IWF185SE2
IWF185SR2
IWF185SL2
IWF185SX2
IWF185SY2
IWF185ZN2
IWF185ZC2
IWF185ZD2
IWF185ZE2
IWF185ZL2
IWF185ZX2
IWF185ZY2
IWF235AN2
IWF235MN2
IWF235MC2
IWF235MD2
IWF235ME2
IWF235ML2
IWF235MX2
IWF235MY2
IWF235SC2
IWF235SD2
IWF235SE2
IWF235SR2
IWF235SL2
IWF235SX2
IWF235SY2
IWF235ZN2
IWF235ZC2
IWF235ZD2
IWF235ZE2
IWF235ZL2
IWF235ZX2
IWF235ZY2
IWF305AN2
IWF305MN2
IWF305MC2
IWF305MD2
IWF305ME2
IWF305ML2
IWF305MX2
IWF305MY2
IWF305SC2
IWF305SD2
IWF305SE2
IWF305SR2
IWF305SL2
IWF305SX2
IWF305SY2
IWF305ZN2
IWF305ZC2
IWF305ZD2
IWF305ZE2
IWF305ZL2
IWF305ZX2
IWF305ZY2
CWF033AN2
CWF033MN2
CWF033MC2
CWF033MD2
CWF033ME2
CWF033ML2
CWF033MX2
CWF033MY2
CWF040AN2
CWF040MN2
CWF040MC2
CWF040MD2
CWF040ME2
CWF040ML2
CWF040MX2
CWF040MY2
CWF055AN2
CWF055MN2
CWF055MC2
CWF055MD2
CWF055ME2
CWF055ML2
CWF055MX2
CWF055MY2
CWF075AN2
CWF075MN2
CWF075MC2
CWF075MD2
CWF075ME2
CWF075ML2
CWF075MX2
CWF075MY2
CWF150AN2
CWF150MN2
CWF150MC2
CWF150MD2
CWF150ME2
CWF150ML2
CWF150MX2
CWF150MY2
CWF185AN2
CWF185MN2
CWF185MC2
CWF185MD2
CWF185ME2
CWF185ML2
CWF185MX2
CWF185MY2
CWF235AN2
CWF235MN2
CWF235MC2
CWF235MD2
CWF235ME2
CWF235ML2
CWF235MX2
CWF235MY2
CWF305AN2
CWF305MN2
CWF305MC2
CWF305MD2
CWF305ME2
CWF305ML2
CWF305MX2
CWF305MY2

8
2
Safety and Environmental Informations
Safety
CAUTION LABELS
Please familiarize yourself with the following standard warning symbols. They are
used throughout this manual and on the equipment to alert you to possible hazards.
Anyone operating or servicing this equipment must understand these symbols and
must follow all safety rules in this manual.
ELECTRICAL HAZARD
This symbol alerts you to the presence of a dangerous voltage, which could cause a
serious shock resulting in personal injury or death.
CONSULT MANUAL
This symbol warns you to consult the manual for important instructions concerning
the machine and possible hazards.
MOVING PARTS HAZARD
This symbol alerts you to the presence of possible dangerous moving parts within
the machine. Guards should always be in place when the machine is in operation. Be
very careful when servicing the drive system.
PINCHING HAZARD
This warning symbol indicates the presence of a pinch point on the machine. This is
a place where your hand might be pinched or crushed, resulting in a severe injury.
Make sure you understand these hazards and keep all body parts clear of them.
HOT SURFACE HAZARD
This symbol indicates the presence of a potentially hot surface. Some machine
surfaces and parts may become extremely hot during normal operation and should
not be touched.
ATTENTION
This symbol identies information about practices or circumstances that can lead to
personal injury or death, property damage, or economic loss.

9
2
Environmental
Disposal of Unit
This appliance is marked according to the European directive 2002/96/
EC on Waste Electrical and Electronic Equipment (WEEE).
This symbol on the product or on its packaging indicates that this
product shall not be treated as household waste. Instead it shall be
handed over to the applicable collection point for the recycling of
electrical and electronic equipment. Ensuring this product is disposed
of correctly, you will help prevent potential negative consequences
for the environment and human health, which could otherwise be
caused by inappropriate waste handling of this product. The recycling
of materials will help to conserve natural resources. For more detailed
information about recycling of this product, please contact your local
distributor resources.

10
Explanation of Safety Messages
Throughout this manual and on machine decals, you will nd precautionary statements (“DANGER,”
“WARNING,” and “CAUTION”) followed by specic instructions. These precautions are intended for the
personal safety of the operator, user, servicer, and those maintaining the machine.
DANGER
Indicates an imminently hazardous situation that, if not
avoided, will cause severe personal injury or death.
WARNING
Indicates a hazardous situation that, if not avoided, could
cause severe personal injury or death.
CAUTION
Indicates a hazardous situation that, if not avoided, may
cause minor or moderate personal injury or property
damage.
Safety Decals
Safety decals appear at crucial locations on the machine. Failure to maintain legible safety decals could
result in injury to the operator or service technician.
To provide personal safety and keep the machine in proper working order, follow all maintenance and
safety procedures presented in this manual. If questions regarding safety arise, contact the manufacturer
immediately.
Use manufacturer-authorized spare parts to avoid safety hazards.
Additional precautionary statements (“IMPORTANT” and “NOTE”) are followed by specic instructions.
IMPORTANT: The word “IMPORTANT” is used to inform the reader of specic procedures where
minor machine damage will occur if the procedure is not followed.
NOTE: The word “NOTE” is used to communicate installation, operation, maintenance or servicing
information that is important but not hazard related.
2

11
Important Safety Instructions
WARNING
To reduce the risk of re, electric shock, serious injury or
death to persons when using your washer, follow these
basic precautions:
1. Read all instructions before using the washer.
2. Refer to the GROUNDING INSTRUCTIONS in the installation Manual for the proper grounding of the
washer.
3. Do not wash textiles that have been previously cleaned, washed, soaked, or spotted with gasoline,
dry-cleaning solvents, or other ammable or explosive substances as they give off vapors that could
ignite or explode.
4. Do not add gasoline, dry-cleaning solvents, or other ammable or explosive substances to the wash
water. These substances give off vapors that could ignite or explode.
5. Under certain conditions, hydrogen gas may be produced in a hot water system that has not been
used for two weeks or more. HYDROGEN GAS IS EXPLOSIVE. If the hot water system has not been
used for such a period, before using a washing machine or combination washer-dryer, turn on all hot
water faucets and let the water ow from each for several minutes. This will release any accumulated
hydrogen gas. The gas is ammable, do not smoke or use an open ame during this time.
6. Do not allow children to play on or in the washer. This appliance is not intended for use by young
children or inrm persons without supervision. Young children should be supervised to ensure that
they do not play with the appliance.
7. Before the washer is removed from service or discarded, remove the door to the washing
compartment.
8. Do not reach into the washer if the wash drum is moving. This is an imminently hazardous situation
that, if not avoided, will cause severe personal injury or death.
9. Do not install or store the washer where it will be exposed to water and/or weather.
10. Do not tamper with the controls.
11. Do not repair or replace any part of the washer, or attempt any servicing unless specically
recommended in the user-maintenance instructions or in published user-repair instructions that the
user understands and has the skills to carry out.
12. To reduce the risk of an electric shock or re, DO NOT use an extension cord or an adapter to connect
the washer to an electrical power source.
13. Use a washer only for its intended purpose, washing textiles.
14. ALWAYS disconnect the washer from the electrical supply before attempting any service. Disconnect
the power cord by grasping the plug, not the cord.
15. Install the washer according to the INSTALLATION INSTRUCTIONS. All connections for water, drain,
electrical power and grounding must comply with local codes and be made by licensed personnel
when required.
16. To reduce the risk of re, textiles which have traces of any ammable substances such as vegetable
oil, cooking oil, machine oil, ammable chemicals, thinner, etc., or anything containing wax or
chemicals such as in mops and cleaning cloths, must not be put into the washer. These ammable
substances may cause the fabric to catch on re.
17. Do not use fabric softeners or products to eliminate static unless recommended by the manufacturer of
the fabric softener or product.
18. Keep washer in good condition. Bumping or dropping the washer can damage safety features. If this
occurs, have washer checked by a qualied service person.
19. Replace worn power cords and/or loose plugs.
20. Be sure water connections have a shut-off valve and that ll hose connections are tight. CLOSE the
shut-off valves at the end of each wash day.
2

12
21. Loading door MUST BE CLOSED any time the washer is to ll, tumble, or spin. DO NOT bypass the
loading door switch by permitting the washer to operate with the loading door open.
22. Always read and follow manufacturer’s instructions on packages of laundry and cleaning aids. Heed
all warnings or precautions. To reduce the risk of poisoning or chemical burns, keep them out of the
reach of children at all times (preferably in a locked cabinet).
23. Always follow the fabric care instructions supplied by the textile manufacturer.
24. Never operate the washer with any guards and/or panels removed.
25. DO NOT operate the washer with missing or broken parts.
26. DO NOT bypass any safety devices.
27. Failure to install, maintain, and/or operate this washer according to the manufacturer’s instructions
may result in conditions which can produce bodily injury and/or property damage.
28. It is recommended that the machine be installed by qualied technicians.
29. Before starting repairs or maintenance, shut off all power and water supplies.
30. To prevent re and explosion:
Keep the area around the machine free from inammable or combustible products.
NOTE: The WARNINGS and IMPORTANT SAFETY INSTRUCTIONS appearing in this manual are not
meant to cover all possible conditions and situations that may occur. Common sense, caution, and
care must be exercised when installing, maintaining, or operating the washer.
Any problems or conditions not understood should be reported to the dealer, distributor, service agent, or
the manufacturer.
SAVE THESE INSTRUCTIONS
2

13
Operator Safety
WARNING
NEVER insert hands or objects into basket until it has
completely stopped. Doing so could result in serious
injury.
To ensure the safety of machine operators, the following maintenance checks must be performed daily:
1. Prior to operating the machine, verify that all warning signs are present and legible. Missing or illegible
signs must be replaced immediately. Make certain that spares are available.
2. Check door interlock before starting operation of the machine:
a. Attempt to start the machine with the door open. The machine should not start with the door open.
b. Close and lock the door and start a cycle. Attempt to open the door while the cycle is in progress.
The door should not open.
If the door lock and interlock are not functioning properly, call a service technician.
3. Do not attempt to operate the machine if any of the following conditions are present:
a. The door does not remain securely locked during the entire cycle.
b. Excessively high water level is evident.
c. Machine is not connected to a properly grounded circuit.
Do not bypass any safety devices in the machine.
WARNING
Never operate the machine with a bypassed or
disconnected balance system. Operating the machine
with severe out-of-balance loads could result in personal
injury and serious equipment damage.
SAVE THESE INSTRUCTIONS
2

14
3
METRIC US
Capacity (dry weight) Ratio [kg/Lit]
1:11 13,1 kg 28.88 lb.
1:10 14,5 kg 31.96 lb.
1:9 16,1 kg 35.49 lb.
Cylinder
Diameter 680 mm 26.77 inch
Depth 400 mm 17.74 inch
Volume 145 Lit 5.12 ft³.
Cabinet
Height 1204 mm 47.40 inch
Width 780 mm 30.70 inch
Depth 842 mm 33.14 inch
Front loading
Diameter door opening 400 mm 15.74 inch
Door height 390 mm 15.35 inch
To center 590 mm 23.22 inch
Speed
Wash 10 - 50 tr/min - RPM
Distribution 85 tr/min - RPM
Spin 100 - 465 tr/min - RPM
G-factor
Spin 82
Motor (3-phase)
4p. 1470 tr./min 1,1kW / 1,47HP
Drain valve
2"
Water supply
Hard, soft, warm water 3/4"
Steam connection
Steam connection 3/8"
Heating
Electrical 230/400 V 12 kW - 15 kW - 18 kW
Electrical 400V 21 kW - 24 kW
Steam X
Warm water (without additional heating) X
Warm water (with additional heating) X
Packing dimensions
(H x W x D) mm - inch 1340x848x920 mm - 52.75x33.38x36.22 inch
Weight
Net 306 kg 674.61 lb.
Gross 328 kg 723.11 lb.
Technical data WF150, IWF150, IWF033, CWF033
Technical data and dimensions

936 [36.85]
894 [35.2]
969 [38.15]
843 [33.19]
84 [3.31]
310 [12.2]
225 [8.86]
L
209 [8.23]
K
E
332 [13.07]
A
267 [10.51]
202 [7.95]
106 [4.17]
B
C
D
I
109 [4.29]
G
F
1175 [46.26]
1204 [47.4]
70 [2.76]
390 [15.35]
780 [30.71]
640 [25.2] 70 [2.76]
760 [29.92]
816 [32.12]82 [3.23]
410 [16.14]28 [1.1] 260 [10.24]
84 [3.31]
33 [1.3]
220 [8.66]
3
15
Dimensions WF150, IWF150, IWF033, CWF033
Legend: metric mm [inches]
 A. Ventilation soap dispenser
B. Liquid soap connections
C. Hard water connections 3/4"
D. Warm water connections 3/4"
E. Soft water connections 3/4"
F. Main switch
G.Electrical connections
 I. Ventilation tub
K. Drain valve
L. Steam connections

16
3
METRIC US
Capacity (dry weight) Ratio [kg/Lit]
1:11 16,4 kg 36.15 lb.
1:10 18,1 kg 39.90 lb.
1:9 20,1 kg 44.31 lb.
Cylinder
Diameter 680 mm 26.77 inch
Depth 500 mm 19.68 inch
Volume 181 Lit 6.39 ft³
Cabinet
Height 1204 mm 47.40 inch
Width 780 mm 30.70 inch
Depth 942 mm 37.08 inch
Front loading
Diameter door opening 400 mm 15.74 inch
Door height 390 mm 15.35 inch
To center 590 mm 23.22 inch
Speed
Wash 10 - 50 tr/min - RPM
Distribution 85 tr/min - RPM
Spin 100 - 465 tr/min - RPM
G-factor
Spin 82
Motor (3-phase)
4p. 1470 tr./min 1,1kW / 1,47HP
Drain valve
2" or 3" (option)
Water supply
Hard, soft, warm water 3/4"
Steam connection
Steam connection 3/8"
Heating
Electrical 230/400 V 12 kW - 15 kW - 18 kW
Electrical 400V 21 kW -24 kW
Steam X
Warm water (without additional heating) X
Warm water (with additional heating) X
Packing dimensions
(H x W x D) mm - inch 1340x848x1020 mm- 52.75x33.38x40.15 inch
Weight
Net 321 kg 707.68 lb.
Gross 344 kg 758.39 lb.
Technical data WF185, IWF185, IWF040, CWF185, CWF040

3
860.1 [33.86]
916.1 [36.07]82 [3.23]
510 [20.08]28 [1.1] 260 [10.24]
84 [3.31]
33 [1.3]
220 [8.66]
936 [36.85]
894 [35.2]
969 [38.15]
843 [33.19]
84 [3.31]
310 [12.2]
225 [8.86]
L
209 [8.23]
K
E
332 [13.07]
A
267 [10.51]
202 [7.95]
106 [4.17]
B
C
D
I
109 [4.29]
G
F
1175 [46.26]
1204 [47.4]
70 [2.76]
390 [15.35]
780 [30.71]
640 [25.2] 70 [2.76]
17
Dimensions WF185, IWF185, IWF040, CWF185, CWF040
Legend: metric mm [inches]
 A. Ventilation soap dispenser
B. Liquid soap connections
C. Hard water connections 3/4"
D. Warm water connections 3/4"
E. Soft water connections 3/4"
F. Main switch
G.Electrical connections
 I. Ventilation tub
K. Drain valve
L. Steam connections

18
3
METRIC US
Capacity (dry weight) Ratio [kg/Lit]
1:11 21,3 kg 46.95 lb.
1:10 23,4 kg 51.58 lb.
1:9 26 kg 57.32 lb.
Cylinder
Diameter 750 mm 29.52 inch
Depth 530 mm 20.86 inch
Volume 234 Lit 8.26 ft³.
Cabinet
Height 1376 mm 54.17 inch
Width 860 mm 33.85 inch
Depth 1048 mm 41.25 inch
Front loading
Diameter door opening 400 mm 15.74 inch
Door height 500 mm 19.68 inch
To center 700 mm 27.55 inch
Speed
Wash 10 - 50 tr/min - RPM
Distribution 85 tr/min - RPM
Spin 100 - 445 tr/min - RPM
G-factor
Spin 82
Motor (3-phase)
4p. 1470 tr./min 1,5 kW / 2HP
Drain valve
3"
Water supply
Hard, soft, warm water 3/4"
Steam connection
Steam connection 1/2"
Heating
Electrical 230/400 V 12 kW - 15 kW - 18 kW
Electrical 400V 21 kW - 24 kW
Steam X
Warm water (without additional heating) X
Warm water (with additional heating) X
Packing dimensions
(H x W x D) mm - inch 1560x980x1140mm - 61.41x 38.58x 44.88 inch
Weight
Net 383 kg 844.37 lb.
Gross 433 kg 954.60 lb.
Technical data WF235, IWF235, IWF055, CWF235, CWF055

115 [4.53]
200 [7.88]
92 [3.62]
983 [38.68]
1121 [44.11]
1242 [48.9]
321 [12.64]
241 [9.49]
236 [9.29]
151 [5.94]
L
235 [9.25]
392 [15.41]
F
860 [33.86]
90 [3.54] 90 [3.54]680 [26.77]
1351 [53.19]
1376 [54.17]
500 [19.69]
50 [1.97] 282 [11.1] 518 [20.39] 50 [1.97]
49 [1.93]
241 [9.49]
14 [0.55] 984.5 [38.76]
927 [36.5]
900 [35.43]
3
19
 A. Ventilation soap dispenser
B. Liquid soap connections
C. Hard water connections 3/4"
D. Warm water connections 3/4"
E. Soft water connections 3/4"
F. Main switch
G.Electrical connections
 I. Ventilation tub
K. Drain valve
L. Steam connections
Dimensions WF235, IWF235, IWF055, CWF235, CWF055
Legend: metric mm [inches]

20
3
METRIC US
Capacity (dry weight) Ratio [kg/Lit]
1:11 28 kg 61.72 lb.
1:10 30,4 kg 67.02 lb.
1:9 33,3 kg 73.41 lb.
Cylinder
Diameter 850 mm 33.46 inch
Depth 537 mm 21.14 inch
Volume 304 Lit 10.73 ft³.
Cabinet
Height 1412 mm 55.57 inch
Width 990 mm 38.98 inch
Depth 1190 mm 46.85 inch
Front loading
Diameter door opening 400 mm 15.74 inch
Door height 500 mm 19.68 inch
To center 700 mm 27.55 inch
Speed
Wash 10 - 50 tr/min - RPM
Distribution 85 tr/min - RPM
Spin 100 - 415 tr/min - RPM
G-factor
Spin 82
Motor (3-phase)
4p. 1470 tr./min 2,2kW / 2,94HP
Drain valve
3"
Water supply
Hard, soft, warm water 3/4"
Steam connection
Steam connection 1/2"
Heating
Electrical 230/400 V 18 kW
Electrical 400V 18 kW - 21 kW - 24 kW
Steam X
Warm water (without additional heating) X
Warm water (with additional heating) X
Packing dimensions
(H x W x D) mm - inch 1560x1120x1300mm - 61.41x 44.09x 51.18 inch
Weight
Net 534 kg 1177.26 lb.
Gross 584 kg 1287.49 lb.
Technical data WF305, IWF305, IWF075, CWF305, CWF075