Allied Telesis AT-MC605 User manual

Datasheet | Media Converters
AT-MC605
Subscriber/provider unit
Extended Ethernet Operation
Used as a pair, the AT-MC605 provides up to
100Mbps / 60Mbps of data transfer, while
supporting POTS service over phone-grade,
twisted-pair, wiring (CAT1, 2, 3) at distances up
to 3km or 10,000 feet.These units are the ideal
solution for providing data on 'last-mile' twisted-
pair circuits or existing in-building wiring.
Standard Ethernet operation is preserved end-
to-end, retaining VLAN tags, and Ethernet MAC
information across the link, while higher layer
protocols are passed transparently. 10/100Mbps
Ethernet operation is supported simultaneously
with POTS, ISDN or PBX signaling, without
disruption.
MTU and MDU Applications
Multi-Tenant Units (MTU) such as offices and
campuses, and Multiple Dwelling Units (MDU)
such as hotels and apartments are an ideal
environment for the AT-MC605 network
extenders, where private phone-grade wiring
can be used to provide broadband access to
Internet services including video streaming,
www, gaming and e-mail.There is no need to
re-wire premises with expensive CAT5 or fiber
to provide broadband Ethernet services.
Standalone and Rack-mount
The AT-MC605 provider unit is available as a
compact standalone unit for installation at the
central office, or alternatively, it can be rack-
mounted in the standard AT-MCR12 chassis
from Allied Telesis, capable of housing up to
twelve units in one compact chassis with a
redundant power supply, simplifying wiring and
minimizing space requirements.
Plug and PlayOperation
Simply connect to the RJ-45 Ethernet port and
the unit will automaticallyauto-sense and
configure for 10T or 10/100TX, as well as full or
half-duplex Ethernet operation. An integral
POTS splitter means that existing phone
services are not affected - no reconfiguration is
required.
Key Features
•Up to 100Mbps / 60Mbps VDSL operation up
to 3km or 10,000ft
•Can function as a subscriber or provider by
flipping a switch
•Traffic shaping upstream and downstream
•Supports both fast mode and interleave mode
•Operates over category 1, 2, 3 or 5 telephone
quality cabling
•10/100 Ethernet port
•POTS port
•Integral POTS splitter
•Auto MDI/MDI-X
•Power, Ethernet activity and link LEDs
•VDSL link and rate LEDs
•Fully configurable using front panel dipswitch
•Standalone and rack-mountable
•Wall-mountable using optional AT-WLMT
bracket
•Compact form factor
•Rate-limiting is supported with the line-rate
cap at 50Mbps / 20Mbps
•Metal chassis
•Energy Star compliant external power adapter
AT-MC605
Extended EthernetTM over VDSL
Allied T
elesis www.alliedtelesis.com

AT-MC605 |Extended Ethernet over VDSL
Allied T
elesis www.alliedtelesis.com
Typical Performance Over POTS Network
Typical Performance Over ISDN Network
Server
AT-8000S
AT-MC605
Router
ADSL
AT-MCR12 &
AT-MC605
PBX
Internet
Public Switch
Telephone
Network (PSTN)

Technical Specifications
Product Specifications
DMT modulation
Spectrally compatible with ISDN and POTS services
FDD duplexing
Datarate up to 100Mbps / 60Mbps full-duplex
4M flash
Half/full-duplex
Auto-negotiation
Auto MDI/MDI-X
Speed/Distance
Speed up to 100Mbps / 60Mbps at short distances; data
throughput up to 3km or 10,000ft distances
(subject to cable type)
Front Panel Indicators
System power
Ethernet link
Ethernet activity
VDSL link
VDSL rate
Interface Connections
VDSL interface RJ-11
Ethernet interface RJ-45
POTs interface RJ-11
Management 4-pin DIP switch
Reliability
MTBF 700,000 hours
Physical Characteristics VDSL
Interface
Dimensions 9.5cm x 10.9cm x 2.5cm
(W x D x H)
Weight 300g
Mounting Tabletop and rack-mountable*
*requires AT-MCR12 chassis
Environmental Specifications
Operating temp. 0°C – 40°C (32°F – 104°F)
Storage temp. -25°C to 70°C (-13°F to 158°F)
Relative humidity 5% to 95%, non-condensing
Operating altitude up to 10,000ft
Power Characteristics
External power supply 120V AC, 60Hz (US model)
240V AC, 50Hz
(European models)
Input supply voltage 12vDC
Max current 500mA
Power cconsumption 4W
Energy Star compliant
Country of Origin
China
Approvals
UL 1950
FCC class B
CSA
EN 55022 class B
EN 60950 (TUV)
EN 50082-1
Ordering Information
AT-MC605-60
Subscriber/provider unit with EnergyStar multi-country
power adapter.
AT-MC605 |Extended Ethernet over VDSL
USA Headquarters |19800 North Creek Parkway |Suite 100 |Bothell |WA 98011 |USA |T: [phone] |F: [phone]
European Headquarters |Via Motta 24 |6830 Chiasso |Switzerland |T: +41 91 69769.00 |F: +41 91 69769.11
Asia-Pacific Headquarters |11 T
ai Seng Link |Singapore |534182 |T: [phone] |F: [phone]
www.alliedtelesis.com
©2009 Allied T
elesis Inc. All rights reserved. Information in this document is subject to change without notice. All company names, logos, and product designs that are trademarks or registered trademarks are the property of their respective owners. 617-000318 Rev. D