Allnet ALL0484WMP User manual

ALL0484WMP
24 Port 10/100 + 2 Combo
Gigabit FX/SFP
Nway PoE Switch
User’s Manual
FCC Warning
This device has been tested and found to
comply with limits for a Class B digital device,
pursuant to Part 2 and 15 of FCC Rules.
These limits are designed to provide
reasonable protection against harmful
interference when the equipment is operated
in a commercial environment. This
equipment generates and radiates radio
frequency energy and, if not installed and
used in accordance with the user’s manual, it
may cause interference in which case users
will be required to correct interference at their
own expenses.
CE Warning
This is a Class B product. In a domestic
environment, this product may cause radio
interference in which case the user may be
required to take adequate measures.
Introduction
This switch provides 24 10/100Mbps NWAY
RJ-45 ports and can support 2 Combo Gigabit
Copper/SFP to uplink.. It was designed for
easy installation and high performance in an
environment where traffic is on the network
and the number of users increases
continuously.
It consists of 24 PSE/PoE ports. That can
solve the limitation of the power outlet
location and offer the system designer a
flexible solution to locate the network device
everywhere.
The rack-mount size was specifically
designed for medium to large workgroups.
The switch can be installed where space is
limited; moreover it provides smooth network
migration and easy upgrade to network
capacity. The 19” size can be rack-mount on
19” cabinet.
Key Features
Provides 24 10/100Mbps Gigabit switching
ports and 2 Combo Gigabit Copper/SFP
24 PSE/PoE function ports
Supporting the power Max. 15.4 W for each
PSE/PoE port
19” rack-mount size
Non-blocking & Non-head-of-line blocking
full wire speed forwarding
Store-and-forward operation support
Embedded 2.75 Mb packet buffer
Provides 4K MAC address entry
Supports broadcast storm filtering
All ports provide Auto-Negotiation and Auto
-MDI/ MDI-X functions
Supports flow control: back pressure for
Half-duplex and IEEE 802.3x for Full-duplex
mode
Smart plug & play
Package Contents
Before you start to install this Switch, please
verify your package contain the following
items:
•One Rack-mount Switch
•Rack-mount Kit for Rack Installation
•One AC Power Cord
•One User’s Manual
Note: If any of these items is found missing or
damaged, please contact your local supplier for
replacement.
Front Panel (LEDs)
LED Indicators of 24 Port + 2 Combo
Gigabit Copper/SFP PoE Switch
LED Status Description
No.
Of
LED
Power On Power on Power
1000M On Link 1000Mbps 2 (25~26)
off Link 10/100Mbps
Link/ ACT
On Link 26 (1~26)
Flashing
Data activating 26 (1~26)
PoE
On
Port is linked to
Power Device 24 (1~24)
Off
No Power Device
is connected 24 (1~24)

Connections
PC/Other devices to this 24 Port + 2
Combo Gigabit Copper/SFP PoE Switch
Via a twisted pair cable straight through, this
switch can be connected to PCs, servers and
other network devices.
Power Device to this 24 Port + 2
Combo Gigabit Copper/SFP PoE
Switch and getting 48V power source
through Cat. 5 cables
Using Cat. 5 twisted-pair cable to connect
Power
Device to the port 1~24 of this switch, and
then
this
switch will supply 48V power to Power
Device over Cat. 5 twisted-pair cable. Pleas
e be
noted Power Device should also comply with
IEEE 802.3af.
Rear Panel (Power)
AC input
AC input (90~260V/AC, 50~60Hz) UL Safety
Technical Specifications
Standards
IEEE 802.3 10BaseT
IEEE 802.3u 100BaseTX
IEEE 802.3ab 1000BaseT
IEEE 802.3z
IEEE 802.3af
IEEE 802.3x Flow control
Features
Number of Ports:
10/100BaseTX with
PSE/PoE RJ-45 Connectors:
24
10/100/1000BaseT with
RJ-45 Connectors: 2
Combo SFP Open Slots: 2
MAC Address: 4K
Buffer Memory: 2.75 Mb
Method: Store and
Forward
Filtering/
Forwarding
Rates
1000Mbps port –
1,488,000pps
100Mbps port – 148,800pps
10Mbps – 14,880pps
Transmission
Media
10BaseT Cat. 3, 4, 5
UTP/STP
100BaseTX Cat. 5 UTP/STP
1000BaseT Cat. 5E
UTP/STP
LED
Indicators
Per Port: LINK/ACT, PoE
ACT/Status
Per Unit: Power
Power
Requirement 90~260V/AC, 50~60Hz
Power
Consumption 390 Watts (Max)
Dimensions 440 × 220 × 44 mm
(L x W x H)
Weight 4.7kg
Operating
Temperature 0 to 55
Storage
Temperature -20 to 90
Humidity 10 to 90% RH
(non-condensing)
Certifications FCC Class A, CE