Allnet ALL8809WMP User manual

ALL8809WMP
8-Port PoE+10/100/1000Mbps
with 2-Port Gigabit SFP
Web Managed Switch
User Manual

User Manual ALL8809WMP I
Content
Content…………………………………………………………………………………I
Introduction……………………………………………………………………………..3
Product Overview……………………………………………………………………………….3
Web Management Feature…………………………………………………………………….3
Specification……………………………………………………………………………………..4
Mechanical……………………………………………………………………………………....4
Performance…………………………………………………………………………………........5
Package Contents……………………………………………………………………………...5
Hardware Description………………….……………………...………………..…….5
Physical Dimensions / Weight………………………………………………………………...5
Front Panel……………………………………………………………………………………...5
LED Indicators…………………………………………………………………………………..6
Rear Panel………………………………………………………………………………………6
Hardware Installation…………………………………………………………………………..7
Software Description………………………………………………………………...7
Login……………………………………………………………………………………………..7
Configuration……………………………………………………………………………………8
System ..…………………………………………………………………….…………….....8
System Configuration……………………………………………...…………………...8/9
Ports ………….…………………………………………………..…………………………..10
Port Configuration ……………………...……………….………………………10/11
Vlan…………………………………….……………………….…………………………...12
Port Segmentation (VLAN) Configuration……………….……………………..........12
Add a Vlan………………………………………………….……………...……………12
VLAN Configuration List………………………………….………………..………….12
VLAN Setup……………………………………………….…...……………………….12
VLAN Per Port Configuration…………………………...……………………………13
Aggregation…………………………………………………………………………….….14
Aggregation / Trunking Configuration…………………………………………….....15
LACP……………………………………………………………………………….……….15
LACP Port Configuration……………………………………...………………………15
RSTP………………………………………………………………………………………..16
RSTP System Configuration……………….………………………………………...16
RSTP Port Configuration………….………………………………………………….16
IGMP Snopping………………………………………………………………………….19

User Manual ALL8809WMP II
IGMP Configuration…………………………………………………………………19
Mirroring…………………………………………………………………………………20
Mirroring Configuration…………………………………………………………...20
QoS……………………………………………………………………………………….21
QoS Configuration…………………………………………………………………..21
QoS Mode: QoS Disabled………………………………………………………….22
QoS Mode: 802.1p…………………………………………………………………..22
QoS Mode: DSCP…………………………………………………………………...23
Power over Ethernet………………………………………………………………………....24
PoE Configuration………………………………………………………………..25
Storm Control……………………………………………………………………………25
Storm Control Configuration……………………………………………………….25
Monitoring…………………………………………………………………………………...26
Statistic Overview……………………………………………………………………… 26
Detailed Statistic………………………………………………………………………..27
LACP Status……………………………………………………………………………. 27
LACP Aggregation Overview……………………………………………………....27
LACP Port Status……………………………………………………………………28
RSTP Status……………………………………………………………………………..28
RSTP VLAN Bridge Overview……………………………………………………..28
RSTP Port Status…………………………………………………………………....29
IGMP Status……………………………………………………………………………..29
IGMP Status………………………………………………………………………….30
VeriPHY…………………………………………………………………………………..30
VeriPHY Cable Diagnostics................................................................................30
Ping……………………………………………………………………………………....32
Ping Parameters………………………………………………………………….....32
Maintenance………………………………………………………………………………...34
Warm Restart…………………………………………………………………………....34
Factory Default………………………………………………………………………….34
Software Upload………………………………………………………………………..35
Configuration File Transfer…………………………………………………………....35
Logout……………………………………………………………………………………36
CE Declaration of Conformity..............................…………….......................................37

User Manual ALL8809WMP 3
Introduction
Product Overview
This switch is a Web Smart Switch equipped with 8-ports PoE+
10/100/1000BaseT(X) plus 2-port gigabit SFP. It is designed for easy
installation and high performance in an environment where traffic is on the
network and the number of users increased continuously. The compact rigid
19” rack-mount size is specifically designed for small to medium workgroups.
It can be installed where space is limited; moreover, it provides smooth
network migration and is easy to upgrade the network capacity.
In addition, the switch features comprehensive and useful functions, such as:
QoS (Quality of Service), Spanning Tree, VLAN, Power over Ethernet (PoE),
Link Aggregation, SNMP/RMON, IGMP Snooping capability via the
intelligent software. It is suitable for both metro-LAN and office application.
Web Management Features
Configuration
System
Ports
VLANs
Aggregation
LACP
RSTP
IGMP Snooping
Mirroring
Quality of Service
Power over Ethernet
Storm Control
Monitoring
Statistics Overview
Detailed Statistics
LACP Status
RSTP Status
IGMP Status
VeriPHY
Ping
Maintenance
Warm Restart

User Manual ALL8809WMP 4
Factory Default
Software Upload
Configuration File Transfer
Logout
Specifications
Standard
IEEE 802.3 10BaseT
IEEE 802.3u 100BaseTX
IEEE 802.3ab 1000BaseT
IEEE 802.3af PoE
IEEE 802.3at PoE+
IEEE 802.3z 1000BaseSX/LX
IEEE 802.3x Full-duplex Flow Control
IEEE 802.3ad Link Aggregation
IEEE 802.1Q VLAN
IEEE 802.1d Spanning tree protocol
IEEE 802.1w Rapid Spanning tree protocol
IEEE 802.1p QoS
Number of Port
8-port PoE+10/100/1000BaseT(X) with 2 Gigabit SFP Open Slots
Mechanical
LED Indicator
Port 1~8: Link/ Act, 1000M, PoE
Port 7FX, 8FX: Link
Per Unit: Power
Power Consumption: 130/260 Watts (Max), 30 Watts per port
Power Input: 100~240V/AC, 50~60HZ
Product Dimensions/ Weight: 424 × 266 × 44 mm (L x D x H ) / 3.2 or 3.4kg
Performance
MAC Address & Multicast group: 8K
Buffer Memory: 176 KB
Jumbo Frames: 9.6K
Transmission Method: Store and Forward

User Manual ALL8809WMP 5
Package Contents
Before you start to install this switch, please verify your package that
contains the following items:
One PoE Gigabit Ethernet Switch
One AC Power Cord
One CD : User Manual
Rack-mount kit
Hardware Description
This part primarily presents hardware of this switch, physical dimensions and
functional overview would be described.
Physical Dimensions/ Weight
424 × 266 × 44 mm (L x D x H ) / 3.2 or 3.4kg
Front Panel
The front Panel of the Web Smart Switch consists of 8 gigabit RJ-45 ports+2
gigabit SFP open slot. The LED Indicators are also located on the front panel.

User Manual ALL8809WMP 6
LED Indicators
The LED Indicators present real-time information of systematic operation
status. The following table provides description of LED status and their
meaning.
Table 1-1 LED Indicators
LED
Status
Description
Power
On
Power is on.
Off
Power is off.
7FX / 8FX
Link
On
SFP Module is connected
Off
SFP Module is disconnected
Link/ACT
Port 1~8
On
10/100/1000 Link is connected
Off
10/100/1000 Link is disconnected
1000M
Port 1~8
On
Link 1000Mbps
Off
Link 10/100Mbps
PoE
Port 1~8
On
providing the power
Off
not providing the power
Rear Panel
The 3-pronged power plug is placed at the rear panel of the switch right side
shown as below.
LED Display
RJ-45 Port
SFP Open Slot
Reset

User Manual ALL8809WMP 7
Hardware Installation
Set the switch on a large flat space with a power socket close by. The flat
space should be clean, smooth, level and sturdy. Make sure there is enough
clearance around the switch to allow attachment of cables, power cord and
allow air circulation. The last, use twisted pair cable to connect this switch to
your PC then user could start to operate the switch.
User Login:
Default IP-Address: 192.168.2.1
Benutzername: admin
Passwort: admin
Software Description
This part instructs user how to set up and manage the switch through the web
user interface. Please follow the description to understand the procedure.
At the first, open the web browser, and go to 192.168.2.1 site then the user will
see the login screen. Just clicks the Apply then the login process is completed
and comes out the sign “Password successfully entered”.

User Manual ALL8809WMP 8
Figure 1-1
After the user login, the right side of website shows all functions as Fig. 1-2.
Figure 1-2
Configuration
System
System Configuration
This page shows system configuration information. User can configure lots of
information as Fig. 1-3:

User Manual ALL8809WMP 9
Figure 1-3
MAC Address: Displays the unique hardware address assigned by
manufacturer (default).
S/W Version: Displays the switch’s firmware version.
H/W Version: Displays the switch’s Hardware version.
DHCP Enabled: Click the box to enable DHCP
Fallback IP address: Manually assign the IP address that the network is
using. The default IP is 192.168.2.1
Fallback Subnet Mask: Assign the subnet mask to the IP address
Fallback Gateway: Assign the network gateway for industrial switch. The
default gateway is 0.0.0.0.