Amantii Advanced Series User manual

Replace Main
PCB (4738)
Advanced Series Models:
WM-BI-28-3421-BLKGLS, WM-BI-43-5123-BLKGLS, WM-BI-58-6421-BLKGLS
WM-BI-76-8221-BLKGLS, WM-BI-106-11524-BLKGLS

1. Remove the log
Take out the log carefully and to unplug the log PCB wire.
Log
Log PCB

角泡+加卡
2. Remove front panel & glass
Take away the front glassRemove front
panel 7 screws
Front
panel

角泡+加卡
3. Remove color glass
Remove side glass and
the color glass panel
Remove side glass
panel screws

4.Remove airlet cover to change PCB
1. Unplug the PCB wire
2. Remove PCB board screws to take out the
PCB to change new PCB
Remove front
airlet screws
Remove left
airlet screws

5.Install back the airlet cover
Put back the
screws
Put back the left
inlet

6.Put back color glass
Put back the
side screws

7. Install back the front glass and panel
1. Put back the log
2. Plug the log wire in place
Tighten the screws
Front
panel