Amantii BI-40-DEEP User manual

INSTALLATION AND
OPERATION INSTRUCTIONS FOR
BUILT- IN UNITS
09 13-01
BI-40-DEEP BI-50-DEEP BI-60-DEEP BI-72-DEEP BI-88-DEEP
operation

2
TABLEOF CONTENTS
CONGRATULATIONS!
InselectingthisAmantii Wall MountORBuilt-inelectricfireplace,you havechosen the
finestand mostdependablefireplaceon the markettoday.Abeautifuland functional
addition tothe finesthomes.Welcometothe familyofsatisfied Amantii electricfireplace
owners.
Pleasereadand carefullyfollowall ofthe instruction sfound inthismanual.Pleasepay
specialattentiontothesafetyinstructionsprovided inthismanual.Theinstructions
included herewill assurethatyouhavemanyyearsofdependableandenjoyableservice
fromyourAmantii product.
ImportantinstructionsPage 3
BI-40-DEEPPage 4
BI-52-DEEPPage 5
Installation OverviewPage 9
Package ContentsPage 10
Built-InInstallation Page 11
FireGlass MediaInstallation Page 13
Operating the UnitPage 14
Replacing TheRemoteControlBattery Page 16
CareAnd MaintenancePage 17
FireplaceMaintenancePage 18
TroubleShooting Page 19
ServiceHistory Page 21
WarrantyPage 22
DealerContactInformation BackPage
Page 13
Media options
Parts list Page 20
BI-60-DEEPPage 6
BI-72-DEEPPage 7
BI-88-DEEPPage 8

IMPORTANTINSTRUCTIONS
WARNING!
SAVE THESE INSTRUCTIONS
B
A
C D
Fig. 1
Grounding Pin
Cover Of Grounded
Outlet Box
Metal
Screws
Adapter
Grounding
Means Grounding
Pin
15.
5. Do not use outdoors.
grounded
3

40” 24“ or 101.6 cm 60 cm
94.6lbs or 43kg
NOTE: This appliance must be electrically
wired and grounded in accordance with
local codes. In the absence oflocal codes,
us the current CSA C22.1 Canadian Elec-
trical Code in Canada or the ANSI/NFPA
States.
This appliance has been tested in accor-
dance with the UL Standand 2021 for
appliances in the United States and Cana-
da. If you need assistance during installa-
BI-40-DEEP
1500W
19W
12 1/4” or 31.2 cm
23 5/8” or 60 cm
25W
sideLeft
t
Appliance Width
750W
1500W
12A
Built-In Appliance
120V AC,60Hz
Model Number
Voltage
Amps
Appliance Heigh
Appliance Depth
Gross Weight
Cord Length
Rough Wall Opening Size
74.81” or 190.00 cm
HEATER HIGH
LOW
NO HEATER
MOTOR HEATER
MOTOR FLAME 4W
BI-40-DEEP
38 5/8” or 98.1 cm
231
2"[600mm]
153
4"[402mm]
4"[99mm]
351
4" [895 mm]
391
4" [995mm]
381
2" [981mm]
12"[302mm]
123
4"[322mm]
12"[302mm]
This appliance for built-in only.
4

50” 24“ or 127 cm 60 cm
94.6lbs or 43kg
NOTE: This appliance must be electrically
wired and grounded in accordance with
local codes. In the absence oflocal codes,
us the current CSA C22.1 Canadian Elec-
trical Code in Canada or the ANSI/NFPA
States.
This appliance has been tested in accor-
dance with the UL Standand 2021 for
appliances in the United States and Cana-
da. If you need assistance during installa-
BI-50-DEEP
1500W
19W
12 1/4” or 31.2 cm
23 5/8” or 60 cm
25W
sideLeft
t
Appliance Width
750W
1500W
12A
Built-In Appliance
120V AC,60Hz
Model Number
Voltage
Amps
Appliance Heigh
Appliance Depth
Gross Weight
Cord Length
Rough Wall Opening Size
74.81” or 190.00 cm
HEATER HIGH
LOW
NO HEATER
MOTOR HEATER
MOTOR FLAME 4W
BI-50-DEEP
48 5/8” or 123.5 cm
231
2"[600mm]
153
4"[402mm]
4"[99mm]
451
4" [1149mm]
491
4" [1249mm]
481
2" [1235mm]
12"[302mm]
123
4"[322mm]
12"[302mm]
This appliance for built-in only.
5

60” 24“ or 152.4 cm 60 cm
94.6lbs or 43kg
NOTE: This appliance must be electrically
wired and grounded in accordance with
local codes. In the absence oflocal codes,
us the current CSA C22.1 Canadian Elec-
trical Code in Canada or the ANSI/NFPA
States.
This appliance has been tested in accor-
dance with the UL Standand 2021 for
appliances in the United States and Cana-
da. If you need assistance during installa-
BI-60-DEEP
1500W
19W
12 1/4” or 31.2 cm
23 5/8” or 60 cm
25W
sideLeft
t
Appliance Width
750W
1500W
12A
Built-In Appliance
120V AC,60Hz
Model Number
Voltage
Amps
Appliance Heigh
Appliance Depth
Gross Weight
Cord Length
Rough Wall Opening Size
74.81” or 190.00 cm
HEATER HIGH
LOW
NO HEATER
MOTOR HEATER
MOTOR FLAME 4W
BI-60-DEEP
58 5/8” or 148.9 cm
231
2"[600mm]
153
4"[402mm]
4"[99mm]
551
4" [1403mm]
591
4" [
1503mm]
581
2" [1489mm]
12"[302mm]
123
4"[322mm]
12"[302mm]
This appliance for built-in only.
6

73” 24“ or 185.5 cm 60 cm
126.5lbs or 57.5kg
NOTE: This appliance must be electrically
wired and grounded in accordance with
local codes. In the absence oflocal codes,
us the current CSA C22.1 Canadian Elec-
trical Code in Canada or the ANSI/NFPA
States.
This appliance has been tested in accor-
dance with the UL Standand 2021 for
appliances in the United States and Cana-
da. If you need assistance during installa-
BI-72-DEEP
1500W
19W
12 1/4” or 31.2 cm
23 5/8” or 60 cm
25W
sideLeft
t
Appliance Width
750W
1500W
12A
Built-In Appliance
120V AC,60Hz
Model Number
Voltage
Amps
Appliance Heigh
Appliance Depth
Gross Weight
Cord Length
Rough Wall Opening Size
74.81” or 190.00 cm
HEATER HIGH
LOW
NO HEATER
MOTOR HEATER
MOTOR FLAME 4W
BI-72-DEEP
72 1/8” or 183.2 cm
231
2"[600mm]
153
4"[402mm]
4"[99mm]
683
4" [1746mm]
723
4" [1846mm]
721
4" [1832mm]
12"[302mm]
123
4"[322mm]
12"[302mm]
This appliance for built-in only.
7

89” 24“ or226.1 cm 60 cm
126.5lbs or 57.5kg
NOTE: This appliance must be electrically
wired and grounded in accordance with
local codes. In the absence oflocal codes,
us the current CSA C22.1 Canadian Elec-
trical Code in Canada or the ANSI/NFPA
States.
This appliance has been tested in accor-
dance with the UL Standand 2021 for
appliances in the United States and Cana-
da. If you need assistance during installa-
BI-88-DEEP
1500W
19W
12 1/4” or 31.2 cm
23 5/8” or 60 cm
25W
sideLeft
t
Appliance Width
750W
1500W
12A
Built-In Appliance
120V AC,60Hz
Model Number
Voltage
Amps
Appliance Heigh
Appliance Depth
Gross Weight
Cord Length
Rough Wall Opening Size
74.81” or 190.00 cm
HEATER HIGH
LOW
NO HEATER
MOTOR HEATER
MOTOR FLAME 4W
BI-88-DEEP
88 1/8” or 223.8 cm
231
2"[600mm]
153
4"[402mm]
4"[99mm]
843
4" [2152.4mm]
883
4" [2252.4mm]
881
4" [2238.4mm]
12"[302mm]
123
4"[322mm]
12"[302mm]
This appliance for built-in only.
8

i
INSTALLATION OVERVIEW
NOTE: BEFORE YOU INSTALL
SITE SELECTION
wall.
Review and consider all of the following condi-
r r wo (2) wall
re the power cordis so
pinched or againstasharp edge
and power cordis stored
or redto avoid tripping or snagging
ry to persons.
st c with local codes
-
ry to persons.
rapes, pillow -
re etc.
dir ht and away fr overhead light-
ing.
electric et for ease of electric
and all hardware fr ox and r ove all
packaging relat aterials prior to installa-
WARNING:
T
Phillip rewdriver
aw and/ aw
Level
Tape
Pliers
re
Gloves
E
Fr aterials
Wall Finishing Mar-
terials
aterials
stable)
TOOLS & BUILDINGSUPPLIES
NORMALLY REQUIRED
Volt cir r red.
cated cir referr -
Power supply Wire Gage
Voltage Wire Gage Fuse
120 v 14 G . 15 MP
Wall switch / t hermostat Wire Gage
Voltage Wire Gage
5 Volts 18 Gage
PACKAGING LIST
with:
r te control
To reduce the risk of fire, do not store or
use gasoline or other flammable vapors
and liquids in the vicinity of the heater.
not installed
that it is
ensure that the
Decorative media (See page 8)
9
5. Plug in the unit, then press the control buton on

PACKAGE CONTENTS
A
E
BC
D
Part
1A
B1
C1
D1
EDecorative Media 1
CONTENTS
Part Description Quantity Picture
Screw
0.16 in. x 1.0 in.
Wall Plug
0.3 in. x 1.5 in.
10
10
B
A
0.16 in. x 0.6 in. 10
CWood Screw
Trim
Glass
10

BI-50/72-DEEP INSTALLATION- BUILT IN
NOTE BEFORE YOU INSTALL
The BI-DEEP models are designed to be built-in and allow for the finishing material (drywall,
stone, tile, etc) to be built right down to the glass edge. However, that application is not
always desirable or available so the surround could be used as an alternate finish option.
11
NOTE: The optional trim can be pull out directly from the unit. It will need two person to do it.
1. Take out the unit from the box.Pull out the
optional trim from the unit as show right.
2. Remove the framing plates screws and take off.
the framing plates.
W
D
H
W(") D(") H(")
BI-40-DEEP 40 13 24
BI-50-DEEP 50 13 24
The rough wall opening size of the fireplace.
BI-60-DEEP
BI-72-DEEP
BI-88-DEEP
60 13 24
73 13 24
89 13 24

BI-50/72-DEEP INSTALLATION- BUILT IN
12
4. Bent up the framing plates.
3. Turn around the framing plates and fixing.
5. Insert the fireplace into the wall opening.
6. Drive the mounting screws into the framing
plates on the units and the wall studs.

Media opons
The BI-50-DEEP is shipped with 3 large glass nuggets, clear
and blue diamond shaped media and 6 piece log set.
The BI-72-DEEP is shipped with 6 large glass nuggets, clear
and blue diamond shaped media and 6 piece log set.
6 piece log set
Glass nuggets, clear and
blue diamond shaped media
13
Fire Glass Media - Log Installaon
1. Take off the front clear glass.
There is a bracket which hold the front glass.
2. Installing the fire glass media
It is show as left. Unscrew the screw and take
off the bracket. Turn around and insert to the gap
It can hook the glass and pull out the glass.
Bracket
Front clear glass
Hook the glass and pull off
Front clear glass
Pour the fire glass media into the tray as shown
below. Fee free to use any combination of fire
glass media that you find most appealing.

14
The button located at the top position of the remote control is ON/OFF. Press it, the flame and
ember will be on. The heater will be off. Press again, the fireplace will turn off.
“DISPLAY ON/OFF”: Switching the fireplace flame and tray light ON/OFF. It has functions of setting
memory.
“DISPLAY ORANGE ”: Adjust the orange colour brightness of flame.
“HEATER ON/OFF”: Switching the fireplace heater ON/OFF. It
has functions of setting memory.
“HIGH”: The heater works at 1500W.
“LOW”: The heater works at 750W.
“TEMP.”: The heater keep working if the room temperature lower
than 22℃. The heater not working if the room temperature
higher than 25℃.
“DISPLAY BLUE ”: Adjust the blue colour brightness of flame.
ORANGE BLUE
DISPLAY
HIGH LOW TEMP.
HEATER ON/OFF
DISPLAY ON/OFF

1. Heat control button
2. Flame control button
Plug the heater into a suitable outlet.
1) “Heat control button”
Auto Mode
In this mode the heater will automatically turn on and off. When the room temperature drops below
71° F. (22° C) the heater will turn on to the high heat setting (1500 watt). When the room temperature
is between 71° and 77° F (22-25° C) the heater output will switch to low heat setting (750W). When
the room temperature goes above 77° F (25° C) the heater will turn off.
2) “Flame control button”
Press the Flame brightness adjustment button to adjust the flame height and ember bed brightness.
Press the FLAME control button to cycle through LO, MED, HI and OFF.
HIGH / 1500W
PRESS THE FIRST TIME
LOW / 750W
PRESS THE SECOND TIME
AUTO MODE
PRESS THE THIRD TIME
OFF
1 2
15
Press the HEAT button repeatedly to set the heater to the desired heat setting. The Heater will work on
PRESS THE FOURTH TIME
as shown below.

REPLACING THE REMOTE CONTROL BATTERY
When the remote control stops operating or its range seems reduced, it is time to replace the batteries
with new ones. Remove the batteries if the remote control won’t be used for a long period of time.
1. The battery compartment is located on the back end of the remote.
2. Press the small tab inward as you slide the battery door open and remove the old batteries.
3. Replace with (2) AAA batteries (not included), making sure the + and - sides of the battery match the
inside of the battery compartment.
4. Replace the battery door.
CAUTION:
Always purchase the correct size and grade of battery most suitable for the intended use.
y.
Note:
Caution for Ingestion.
Batteries may contain hazardous substances which could be endangering to the
enviroment and to human health.
This symbol marked on the battery and/or packaging indicates that used battery shall
not be treated as municipal waste. Instead it shall be left at the appropriate collection
point for recycling.
By ensuring used batteries are disposed of correctly, you will help to prevent potential
The recycling of
materials will help to conserve natural resources.
For more information about collection and recycling of used batteries, please contact
your local municipality or your waste disposal service.
Note: please operate remote transmitter at a slow measured pace. Press the remote control buttons with
an even motion and gentle pressure. Repeatedly pressing buttons in rapid succession may cause the
transmitter to Malfunction.
DISPOSAL OF USED BATTERIES
16

CARE AND MAINTENANCE
CLEARANCE TO COMBUSTIBLES
Keep electrical cords, drapery, furniture and other combustibles at least 3 ft. from the front of the heater
and away from the sides.
CLEANING TRIM
Clean the metal trim using a soft cloth, slightly dampened with a citrus oil-based product and buff with a
clean soft cloth. Do not use brass polish or household cleaners as these products will damage the metal
trim. Citrus oil-based products can be obtained at supermarkets or hardware stores.
WARNING: Make sure the power is turned off before proceeding. Any electrical repairs
or rewiring of this unit should be carried out by a licensed electrician in accordance with
national and local codes.
If repairing or replacing any electrical component or wiring, the original wire routing,
color coding and securing locations must be followed.
WARNING: Electrical outlet wiring must comply with local building codes and other
WARNING: . Immediately
electrical system.
WARNING: Disconnect power before attempting any maintenance or cleaning to reduce
WARNING: During any service of this appliance, the power to the unit must be turned off.
First turn the main power switch to the OFF position. Then remove the electrical plug from
the wall outlet.
17

FIREPLACE MAINTENANCE
Disconnectpower before performing any maintenanceorcleaning to reduce the risk of
WARNING:
LEDLIGHT BULBREPLACEMENT
LED light bulbs are to be replaced by the manufacturer, it’s service agent or similar quali-
WARNING:
UNITDISPOSAL
Do not dispose with other household wastes. To prevent possible harm to the environment
or human health from uncontrolled waste disposal, recycle it responsibly to promote the
18

Replace AA batteries in remote control. If problem persists,
a. Appliance is not plugged in
TROUBLESHOOTING
SYMPTOM POSSIBLE CAUSES CORRECTIVE ACTION
Fireplace doesn’t work. Fireplace inner temperature over
heatng or home circuit breaker
has opened.
Reset switch by turning main power switch off and waiting five
mimutes, then turning it back on.
or log set and ember is not
glowing.
LED Light(s) burt out or wiring is
loose. if necessary. Inspect light bulbs and replace if necessary.
Remote Control does not
work. there may have been a loss of power to the unit as a pos-
sible result from a power failure
(i.E. Breaker tripped).
Circuit Breaker trips or fuse
blows when the unit is on. to ensure it is on a dedicated circuit with proper amp. rat-
or replace wiring and/or connectors as necessary.
not turn on.
a. Appliance has overheated and
-
malswitch to disconnect.
OR
b. House circuit breaker has
tripped.
a. Unplug the appliance, allow appliance to cool for 15 min-
utes, then plug back in.
b. Reset the house circuit breaker
Appliance will not come on
ON.
to
an eletrical outlet.
OR
b. Appliance has overheated and
-
malswitch to disconnect.
a. Check plug and plug it in.
b. Unplug the appliance, allow appliance to cool for 15 min-
utes, then plug back in.
Disconnect power before performing any maintenance and allow to cool before servic-
WARNING
Heater does not provide heat Thermal switch has been trippped. Turn the unit off and unplug the unit for five minutes.
when turned on Circuit breaker has been tripped Plug back in and turn the unit on. If plug can be reached,
follow directions for tripped circuit breaker. Turn off circuit
breaker that supplies electricity to the unit. Wait five minutes
then flip circuit breaker back on.
19

REF NO.PART NO. DESCRIPTION REMAKR
1602030C BLOWER AND HEATER ASSEMBLY FRT60420
2601089E CIRCUIT BOARD LRC9-05
3301506 REMOTE RECEIVER
4601140 LED STRIP FOR FLAME AND EMBERLED-H20-1
5601141 LED STRIP FOR FLAME AND EMBERLED-H30-1
6 REMOTE
710101201C FLAME MOTOR
8 10701165FRONT CLEAR GLASS BI-50-DEEP
9 10701166FRONT CLEAR GLASS BI-72-DEEP
10 10702151MIRROR GLASS BI-50-DEEP
11 10702153MIRROR GLASS BI-72-DEEP
12 357503Flicker assembly BI-50-DEEP
13 358503Flicker assembly BI-72-DEEP
14 357022Back cloth BI-50-DEEP
15 358022Back cloth BI-72-DEEP
DEEP SERIES PART LIST
10105048
20