Amantii WM-BI-28-3421 User guide

-58-6421,

TABLE OF CONTENTS
1
CONGRATULATIONS!
-
WM-BI-28-3421
WM-BI-43-5123
WM-BI-43-5123
WM-BI-58-6421
WM-BI-76-8221
WM-BI-106-11524
Trouble Shoong

IMPORTANTINSTRUCTIONS
WARNING!
SAVE THESE INSTRUCTIONS
3
B
A
C D
Fig. 1
Grounding Pin
Cover Of Grounded
Outlet Box
Metal
Screws
Adapter
Grounding
Means Grounding
Pin
16.This heater is include a visual alarm to warn that parts of the heater are geng excessively hot. If the alarm illuminates,
immediately unplug the heater and inspect for an objects on or adjacent to the heater that may have locked the airflow or
otherwise caused high temperatures to have occurred. DO NOT OPERATE THE HEATER WITH THE ALARM ILLUMINATION.

NOTE: This appliance must be electrically
wired and grounded in accordance with
local codes. In the absence oflocal codes,
us the current CSA C22.1 Canadian Elec-
trical Code in Canada or the ANSI/NFPA
States.
WM-BI-28-3421
4
WM-BI-28-3421
Built-In Appliance
120V AC,60Hz
1400W
11.7A
Model Number
Voltage
Amps
28” or 71.50 cm
17” or 43.00 cm
5 1/2” or 14.00 cm
7 3/16” or 18.30 cm
46.76 lbs or 21.21kg
47.71 lbs or 21.64 kg
Right side
Appliance Width (Glass & Stone)
Appliance Height (Glass & Stone)
Appliance Depth Glass Models
Appliance Depth Stone Models
Gross Weight Glass Models
Gross Weight Stone Models
Cord Length
Rough Wall Opening Size
74.81” or 190.00 cm
HEATER HIGH
LOW
NO HEATER
1350W
675W
15W
MOTOR HEATER
MOTOR FLAME
14.5W
4W
21
93
16
24 1
5
34
28
51
2
17
21
16
73
16
5
16
17
16
7
8
17 11
16
7 8
4006492
This appliance has been tested in accor-
dance with the UL Standand 2021 for
appliances in the United States and Cana-
da. If you need assistance during installa-

WM-BI-43-5123
NOTE: This appliance must be electrically
wired and grounded in accordance with
local codes. In the absence oflocal codes,
us the current CSA C22.1 Canadian Elec-
trical Code in Canada or the ANSI/NFPA
States.
5
WM-BI-43-5123
Built-In Appliance
120V AC,60Hz
1400W
11.7A
Model Number
Voltage
Amps
43” or 109.30 cm
17” or 43.00 cm
5 1/2” or 14.00 cm
7 3/16” or 18.30 cm
70.00 lbs or 31.75kg
71.43 lbs or 32.4 kg
Right side
Appliance Width (Glass & Stone)
Appliance Height (Glass & Stone)
Appliance Depth Glass Models
Appliance Depth Stone Models
Gross Weight Glass Models
Gross Weight Stone Models
Cord Length 74.81” or 190.00 cm
HEATER HIGH
LOW
NO HEATER
1350W
675W
23W
MOTOR HEATER
MOTOR FLAME
14.5W
4W
23
93
16
39
51
2
17
31
16
51
73
16
5
16
17
16
7
8
17 11
16
7
8
43
4006492
This appliance has been tested in accor-
dance with the UL Standand 2021 for
appliances in the United States and Cana-
da. If you need assistance during installa-
Rough Wall Opening Size

NOTE: This appliance must be electrically
wired and grounded in accordance with
local codes. In the absence oflocal codes,
us the current CSA C22.1 Canadian Elec-
trical Code in Canada or the ANSI/NFPA
States.
WM-BI-43-5123
6
WM-BI-43-5123
Built-In Appliance
120V AC,60Hz
1400W
11.7A
Model Number
Voltage
Amps
43” or 109.20 cm
17” or 43.00 cm
5 1/2” or 14.00 cm
7 3/8” or 18.70 cm
59.79 lbs or 27.12kg
61.22 lbs or 27.77 kg
Right side
Appliance Width (Glass & Stone)
Appliance Height (Glass & Stone)
Appliance Depth Glass Models
Appliance Depth Stone Models
Gross Weight Glass Models
Gross Weight Stone Models
Cord Length 74.81” or 190.00 cm
HEATER HIGH
LOW
NO HEATER
1350W
675W
23W
MOTOR HEATER
MOTOR FLAME
14.5W
4W
51
23
39 1
2
93
16
43
51
2
17
73
8
3
8
31
16
19
16
13
16
19
16
4006492
This appliance has been tested in accor-
dance with the UL Standand 2021 for
appliances in the United States and Cana-
da. If you need assistance during installa-
Rough Wall Opening Size

NOTE: This appliance must be electrically
wired and grounded in accordance with
local codes. In the absence oflocal codes,
us the current CSA C22.1 Canadian Elec-
trical Code in Canada or the ANSI/NFPA
States.
7
Built-In Appliance
120V AC,60Hz
1400W
11.7A
Model Number
Voltage
Amps
58” or 147.30 cm
17” or 43.00 cm
5 1/2” or 14.00 cm
7 3/16” or 18.30 cm
84.99 lbs or 38.55kg
86.93 lbs or 39.43 kg
Right side
Appliance Width (Glass & Stone)
Appliance Height (Glass & Stone)
Appliance Depth Glass Models
Appliance Depth Stone Models
Gross Weight Glass Models
Gross Weight Stone Models
Cord Length 74.81” or 190.00 cm
HEATER HIGH
LOW
NO HEATER
1350W
675W
27W
MOTOR HEATER
MOTOR FLAME
14.5W
6W
WM-BI-58-6421
WM-BI-58-6421
21
93
16
54 7
16
64
51
2
17
21
16
73
16
5
16
17
16
7
8
17 11
16
7
8
58
4006492
This appliance has been tested in accor-
dance with the UL Standand 2021 for
appliances in the United States and Cana-
da. If you need assistance during installa-
Rough Wall Opening Size

8
WM-BI-76-8221
WM-BI-76-8221
Built-In Appliance
120V AC,60Hz
1400W
11.7A
Model Number
Voltage
Amps
76” or 193.00 cm
17” or 43.00 cm
5 1/2” or 14.00 cm
7 3/16” or 18.30 cm
104.35 lbs or 47.33kg
106.88 lbs or 48.48 kg
Right side
Appliance Width (Glass & Stone)
Appliance Height (Glass & Stone)
Appliance Depth Glass Models
Appliance Depth Stone Models
Gross Weight Glass Models
Gross Weight Stone Models
Cord Length 74.81” or 190.00 cm
HEATER HIGH
LOW
NO HEATER
1350W
675W
30W
MOTOR HEATER
MOTOR FLAME
14.5W
6W
NOTE: This appliance must be electrically
wired and grounded in accordance with
local codes. In the absence oflocal codes,
us the current CSA C22.1 Canadian Elec-
trical Code in Canada or the ANSI/NFPA
States.
21
93
16
70
82 51
2
17
21
16
73
16
5
16
17
16
7
8
17 11
16
7
8
76
4006492
This appliance has been tested in accor-
dance with the UL Standand 2021 for
appliances in the United States and Cana-
da. If you need assistance during installa-
Rough Wall Opening Size

4
WM-BI-106-11524
9
WM-BI-106-11524
Built-In Appliance
120V AC,60Hz
1400W
11.7A
Model Number
Voltage
Amps
106” or 269.30 cm
17” or 43.00 cm
5 1/2” or 14.00 cm
7 3/16” or 18.30 cm
153.64 lbs or 69.69kg
157.19 lbs or 71.30 kg
Right side
Appliance Width (Glass & Stone)
Appliance Height (Glass & Stone)
Appliance Depth Glass Models
Appliance Depth Stone Models
Gross Weight Glass Models
Gross Weight Stone Models
Cord Length 74.81” or 190.00 cm
HEATER HIGH
LOW
NO HEATER
1350W
675W
35W
MOTOR HEATER
MOTOR FLAME
14.5W
6W
NOTE: This appliance must be electrically
wired and grounded in accordance with
local codes. In the absence oflocal codes,
us the current CSA C22.1 Canadian Elec-
trical Code in Canada or the ANSI/NFPA
States.
51
2
17
39
16
73
16
5
16
17
16
7
8
24
93
16
103 1
115
1711
16
7
8
106
4006492
This appliance has been tested in accor-
dance with the UL Standand 2021 for
appliances in the United States and Cana-
da. If you need assistance during installa-
Rough Wall Opening Size

INSTALLATION OVERVIEW
NOTE: BEFORE YOU INSTALL
SITE SELECTION
wall.
Review and consider all of the following condi-
r r wo (2) wall
ethods:
t-In (page 13)
Wnt (Page 14)
re the power cordis nonstalledso
thaspinched or againstasharp edge
and re thahepower cordis stored
or redto avoid tripping or snagging
ry to persons.
st c with local codes
-
ry to persons.
rapes, pillow -
re etc.
dir ht and away fr overhead light-
ing.
electric et for ease of electric
and all hardware fr ox and r ove all
packaging relat aterials prior to installa-
WARNING:
T
Phillip rewdriver
aw and/ aw
Level
Tape
Pliers
re
Gloves
10
E
Fr aterials
Wall Finishing Mar-
terials
aterials
stable)
TOOLS & BUILDINGSUPPLIES
NORMALLY REQUIRED
Volt cir r red.
cated cir referr -
Power supply Wire Gage
Voltage Wire Gage Fuse
120 v 14 G . 15 MP
Wall switch / t hermostat Wire Gage
Voltage Wire Gage
5 Volts 18 Gage
PACKAGING LIST
with:
r te control
To reduce the risk of fire, do not store or
use gasoline or other flammable vapors
and liquids in the vicinity of the heater.

INSTALLATION OVERVIEW
Figure 1
Figure 4
Figure 2
Figure 3
Remove sides of box
Remove packaging surrounding the unit
and front.
Discard packaging materials and store
11

PACKAGE CONTENTS
A
E
BC
D
Part
1ssalGA
B 1
C Wall Bracket 1
D1
EFire Glass Media 1
CONTENTS
Part Description Quantity Picture
Screw
0.16 in. x 1.0 in.
Wall Plug
0.3 in. x 1.5 in.
20
20
B
A
0.16 in. x 0.6 in. 12
C
Screw
0.16 in. x 0.3 in. 2
D
12
Wood Screw

NEW CONSTRUCTION OR
RENOVATION
CAUTION:
Two people may be needed to
moisture and is locatedat least 0.91 m or
-
als such as curtains or drapes, furniture,
bedding, paper,etc.
Figure 5
2. Place the appliance in selected loca-
and store appliance in a safe, dry and
4. Prepare a wall with a framed open-
ing to accomodate the size of your unit.
Leave at least 1/4” (6mm) around the
edge of the appliance. Any new wireing
must be done in compliance with local
and natuionalcodesand other applicable
outlets or circuits. To reduce the risk
licensed electrician.
WARNING:
To preventcontactwith sagging or
-
ancemust not be installedagainst
result.
WARNING:
13
Sides ---------------------- 2 in / 5 cm
Floor ---------------------- 2 in / 5 cm
Top ---------------------- 2 in / 5 cm
Back ---------------------- 0 in / 0 cm
min. 5 cm
2 in
min. 5 cm
2 in
min. 5 cm
2 in
WALL
FLOOR

F ron
-
FIREPLACE INSTALLATIONBUILT IN
just the unit to achieve the desired amount
of depth. (Figure 6)
k r ow
w
-
and the wall studs. (Figure 7)
Figure 7
Figure 6
NOTE BEFORE YOU INSTALL
Wall
14
Power cord
Power cord

Floor
It is strongly recommended that the screws be
screwed into the wall studs where possible. If
anchors are used.
(Figure 8)
ke sure it is level.
hanging into the keyholes on the back of the unit.
(Figure 9, Figure 10)
3. Check the appliance for stability ensuring that
the appliance will not pull free from the wall.
Figure 8
Figure 9
NOTE: BEFORE YOU INSTALL
Stakes for hanging
wall bracket
Back of unit
15
Figure 10
Stakes for hanging
Side view
Wall
3 feet

16
1. To change from log to Fire Glass Media (Figure 12.1)
Unplug unit from wall and make sure controls are switched off. Then, li
log set out.
2. Choose the colour of Fire Glass Media you would like to use. (Figure 11)
3. Place the Fire Glass Media into the Tray (Figure 12.2)
(Built-in installaon shown, Fire Glass Media installaon is the same for both
Built-in and Wall Mount installaon methods.)
It is not necessary to use all the media supplied.
Figure 12.1
Figure 12.2
Hz-10 Harvest moon
G1015 Golden rood
HZ-01 Clear
CLEANING THE MEDIA: The media may contain a fine white dust that needs
to be cleaned prior to installaon. Clean the media with soap, drain, rinse
thoroughly and dry before placing into the tray.

NOTE: BEFORE YOU INSTALL
FRONT INSTALLATION
It is recommended that two people install the
front onto the appliance, wear safety glasses and
gloves when handling glass.
brackets with the four (4) shoulder screws on the
side of the appliance body (Figure 14, or Figure
15)
Figure 13
Figure 14 61erugiF51erugiF
Wall
Unit
Shoulder Screw
Wall
Moun
Unit
Shoulder ScrewScrew
17

OPERATINGTHEUNIT
GETTING POWER TO THEUNIT
1. Make sure the appliance is switched OFF (refer
on the right hand side of the unit. (Figure 16)
3. Plug unit into electrical outlet.
Wall
outlets or circuits. To reduce the risk of
licensed electrician.
WARNING:
Figure 17
Power adaptor port
18
Appliance has overheated and safety
device has cause the thermal switch to
discount. Unplug the appliance, allow
appliance to cool for 15 minutes, then
plug back in.
Inspect for an objects on or adjacent to
the heater that may have locked the
airflow or otherwise caused high
temperatures to have occurred.