Amart Furniture 51385 User manual

ASSEMBLY INSTRUCTION
SHADOW2 2800 OUTDOOR TABLE
ITEM CODE: 51385
Imported by Amart Furniture Pty Ltd, Qld, Brisbane Australia.
For any assistance with assembly or for missing parts please phone Amart
Furniture Ewing Road, Customer Service Free call 1800 351 084
780
Imported by Amart Furniture Pty Ltd, Qld, Brisbane Australia.
For any assistance with assembly or for missing parts please phone Amart
Furniture Ewing Road, Customer Service Free call 1800 351 084
151385
780

PRE-ASSEMBLY PREPARATION
Before you start:
1. Choose a clean, level, spacious assembly area. Avoid hard surfaces that may
damage the product
2. Take care when lifting. Product should be assembled as near as possible to
the point of use
3. Ensure that you have all required contents for complete assembly
4. Always read the assembly instructions carefully before beginning assembly.
5. Keep all hardware parts and packaging out of reach of small children.
6. Do not over tighten the screws and bolts as this may damage the threads
2
15
251385
2

PARTS LIST
No
HARDWARE LIST
Qty
A
Bolts M8x60mm
8pcs
B
Washer Ø16x1mm
8pcs
C
Spring washer
Ø12x1.5mm
8pcs
D
Allen key
1pc
No
COMPONENT PARTS
Qty
1
Table top
1pc
2
Granite top
2pc
3
Legs
4pcs
351385

Step 1: Carefully turn the table top upside down. Attach table top and legs as shown in
diagram using bolts (A) and washers (B&C). Tighten using the allen key (D) provided.
Step2: Using two people carefully turn the table upright and then place the granite stones
on table top as show in diagram.
PE from/card board
451385
Step2: Using two people carefully turn the table upright and then place the granite stones
on table top as show in diagram.

ASSEMBLY IS COMPLETE
ASSEMBLY IS COMPLETE
551385

IMPORTANT: CARE GUIDE FOR YOUR TIMBER FURNITURE
Congratulations! You have just purchased a quality product from
Amart furniture.
Please read on for important information regarding your purchase…
A multi-step finish is applied to all our furniture, but all wood comes from nature. Because of
this, there will be natural variations in surface texture and grain like knots, mineral streaks and
sap runs that may affect the finish.
These differences in character are not defects, but distinctions that make each pie ce of
furniture unique.
Our furniture is built to last. Following these steps for basic care should protect your
investment for years to come.
TIMBERS:
• Prolonged exposure of timber items to the elements may cause premature deterioration
• Regular vacuuming and dusting of items is recommended
• Timber needs regular oiling. Please contact store of purchase for further details
• Minor cracking of timber is a natural process and will not compromise the strength of the
timber
• To extend the life of your product the use of an Amart approved Outdoor Furniture Cover is
highly recommended. Please contact store of purchase for further details
GRANITE:
Do not place very hot or cold items on the granite surface unless adequately thick table mats
are used to prevent such items coming in contact with the granite
Do not sit or stand upon the granite surface
Do not use the granite as a chopping surface
Do not strike the granite with hard or pointed items
When cleaning the granite panels use a damp cloth or leather with washing up liquid or soft
soap if necessary. Do not use washing powders or any other substances containing abrasives
since these may scratch the granite