Amart Furniture SHADOW2 51392 User manual

ASSEMBLY INSTRUCTION
SHADOW2 SINGLE OUTDOOR LOUNGE
CHAIR
ITEM CODE: 51392
880
760
151392
880
Imported by Amart Furniture Pty Ltd, Qld, Brisbane Australia.
For any assistance with assembly or for missing parts please phone Amart
Furniture, Customer Service Free call 1800 009 466
Imported by Amart Furniture Pty Ltd, Qld, Brisbane Australia.
For any assistance with assembly or for missing parts please phone Amart
Furniture, Customer Service Free call 1800 009 466

PRE-ASSEMBLY PREPARATION
Before you start:
1. Choose a clean, level, spacious assembly area. Avoid hard surfaces that may
damage the product
2. Take care when lifting. Product should be assembled as near as possible to
the point of use
3. Ensure that you have all required contents for complete assembly
4. Always read the assembly instructions carefully before beginning assembly.
5. Keep all hardware parts and packaging out of reach of small children.
6. Do not over tighten the screws and bolts as this may damage the threads
2
15
251392
2

PARTS LIST
No
HARDWARE LIST
Qty
A
Hexagon head screw
M6x100
B
Hexagon head screw
M6x40
2pcs
C
Seat cushion + Back
cushion
2pcs
D
Allen key
1pc
E
Pillow
1pc
No
COMPONENT PARTS
Qty
1
Seat
1pc
2
Back rest
1pc
3
Legs
2pcs
351392
6pcs

Step1: Using the 40mm hexagon head screw (B) attach the seat to the backrest with the
allen key (D) as show in the diagram.
Step2: Using the 100mm hexagon head screw (A) attach the seat to the armrests with the
allen key (D) as shown in the diagram. Carefully tighten all bolts.
451392
Step2: Using the 100mm hexagon head screw (A) attach the seat to the armrests with the
allen key (D) as shown in the diagram. Carefully tighten all bolts.

Step 3: Place the Seat and back cushion and pillow on the product as shown in the diagram.
ASSEMBLY IS COMPLETE
551392
880

IMPORTANT: CARE GUIDE FOR YOUR TIMBER FURNITURE
Congratulations! You have just purchased a quality product from Amart Furniture.Please read
on for important information regarding your purchase…
A multi-step finish is applied to all our furniture, but all wood comes from nature. Because of
this, there will be natural variations in surface texture and grain like knots, mineral streaks and
sap runs that may affect the finish.
These differences in character are not defects, but distinctions that make each piec e of
furniture unique.
Our furniture is built to last. Following these steps for basic care should protect your
investment for years to come.
CUSHIONS:
• Direct exposure to the Sun’s harmful UV rays is likely to cause rapid colour fading to fabrics.
For best results we recommend avoiding
exposure to direct sunlight
• To ensure product longevity it is recommended outdoor products are not left permanently
exposed to the elements
• Spot clean using mild detergent and damp cloth. Dry flat in shade
• Do not unzip
• Do not put in washing machine
• Do not tumble dry
• Do not bleach
• Do not dry clean
• Cool iron only
TIMBERS:
• Prolonged exposure of timber items to the elements may cause premature
deterioration
• Regular vacuuming and dusting of items is recommended
• Timber requires regular maintenance and upkeep. Please use the appropriate product
to maintain your product (oil\wax), if you are unsure of which product is suitable – please
contact the store that you purchased from
• Minor cracking of timber is a natural process and will not compromise the strength of
the timber
• To extend the life of your product the use of an Amart approved Outdoor Furniture
Cover is highly recommended. Please contact store of purchase for further details