Amart Furniture REPLICA ADIRONDACK 65412 User manual

ASSEMBLY INSTRUCTION
REPLICA ADIRONDACK OUTDOOR SIDE TABLE
ITEM CODE 65412
Imported by Amart Furniture Pty Ltd, Qld, Brisbane Australia.
For any assistance with assembly or for missing parts please phone
Amart Furniture, Customer Service Free call 1800 009 466
165412
500mm
350mm
420mm

2
PRE-ASSEMBLY PREPARATION
Before you start:
1. Choose a clean, level, spacious assembly area. Avoid hard surfaces that may
damage the product
2. Take care when lifting. Product should be assembled as near as possible to
the point of use
4. Always read the assembly instructions carefully before beginning assembly.
5. Keep all hardware parts and packaging out of reach of small children.
6. Do not over tighten the screws and bolts as this may damage the threads
3. Ensure that you have all required contents for complete assembly
65412
12
11 1
2
10
8
7
4
5
9 3
6
ADDITIONAL TOOLS REQUIRED (not include)
X1
ALLOW 15 MINUTES 1PERSON REQUIRED

3
PARTS LIST
2
34 pcs
1 Top Table 1 pc
Legs
NO. PARTS LIST QT'Y
Shelf 1 pc Bolt M6x30mm 12 pcs
NO. HARDWARE LIST QT'Y
BAllen Key 4mm 1 pc
A
1
2
3
3
3
3
65412

4
STEP 2: Attach 3onto 2using the bolts (A), tighten it up by using an allen key (B)
A
(X4)
B
STEP 1: Attach 3onto 1using the bolts (A), tighten it up by using an allen key (B)
A
(X8)
B
65412
1
3
3
3
3
2
3
3
3
3

5
ASSEMBLY IS COMPLETE
65412

IMPORTANT: CARE GUIDE FOR YOUR TIMBER FURNITURE
Congratulations! You have just purchased a quality product from
Amart furniture.
Please read on for important information regarding your purchase…
A multi-step finish is applied to all our furniture, but all wood comes from nature.
Because of this, there will be natural variations in surface texture and grain like
knots, mineral streaks and sap runs that may affect the finish.
These differences in character are not defects, but distinctions that make each
piece of furniture unique.
Our furniture is built to last. Following these steps for basic care should protect
your investment for years to come.
TIMBERS:
• Prolonged exposure of timber items to the elements may cause premature
deterioration
• Regular vacuuming and dusting of items is recommended
• Timber needs regular oiling. Please contact store of purchase for further details
• Minor cracking of timber is a natural process and will not compromise the
strength of the timber
• To extend the life of your product the use of an Amart approved Outdoor
Furniture Cover is highly recommended. Please contact store of purchase for
further details